TY  - CONF
AU  - Milošević, Jelena
AU  - Nestorović, Miodrag
PY  - 2022
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1757
AB  - The Monument on the Battle of Sutjeska (1965-71), Tjentište, BiH, is an exceptional contemporary artwork in the former Yugoslavia. The monument was designed by sculptor Milorad Živković, while the structural design was developed by the engineer Đorđe Zloković. It represents a monumental sculpture/structure consisting of two symmetrically placed reinforced concrete boulders, 19m height, and penetration. In its symbolic, conceptual, and formal sense, the sculpture is related to the battle of World War II and inspired by the spirit of high modernism and the aesthetic of the so-called freeform. This paper analyses the relation between sculptural and structural forms in this work of memorial architecture. The study results from a literature review, a review of the original design documents (including project elaborate, models, and photo materials); a site visit; and an interview with the sculptor. The paper contributes to the discipline of structural critique by highlighting the lessons learned from the specific design and construction processes, such as the importance of cross-disciplinary collaboration to solve the challenges that art posed; the value of integrating rational reasoning based on technological requirements with creativity to achieve design excellence; and the relevance of simple formulas for structural estimation and learning from experimental models.
PB  - International Association for Shells and Spatial Structures (IASS)
C3  - Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference Innovation·Sustainability·Legacy 19 – 22 September 2022, Beijing
T1  - A continuum between sculptural and structural form in the Sutjeska Memorial
UR  - https://hdl.handle.net/21.15107/rcub_raf_1757
ER  - 

@conference{
author = "Milošević, Jelena and Nestorović, Miodrag",
year = "2022",
abstract = "The Monument on the Battle of Sutjeska (1965-71), Tjentište, BiH, is an exceptional contemporary artwork in the former Yugoslavia. The monument was designed by sculptor Milorad Živković, while the structural design was developed by the engineer Đorđe Zloković. It represents a monumental sculpture/structure consisting of two symmetrically placed reinforced concrete boulders, 19m height, and penetration. In its symbolic, conceptual, and formal sense, the sculpture is related to the battle of World War II and inspired by the spirit of high modernism and the aesthetic of the so-called freeform. This paper analyses the relation between sculptural and structural forms in this work of memorial architecture. The study results from a literature review, a review of the original design documents (including project elaborate, models, and photo materials); a site visit; and an interview with the sculptor. The paper contributes to the discipline of structural critique by highlighting the lessons learned from the specific design and construction processes, such as the importance of cross-disciplinary collaboration to solve the challenges that art posed; the value of integrating rational reasoning based on technological requirements with creativity to achieve design excellence; and the relevance of simple formulas for structural estimation and learning from experimental models.",
publisher = "International Association for Shells and Spatial Structures (IASS)",
journal = "Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference Innovation·Sustainability·Legacy 19 – 22 September 2022, Beijing",
title = "A continuum between sculptural and structural form in the Sutjeska Memorial",
url = "https://hdl.handle.net/21.15107/rcub_raf_1757"
}

Milošević, J.,& Nestorović, M.. (2022). A continuum between sculptural and structural form in the Sutjeska Memorial. in Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference Innovation·Sustainability·Legacy 19 – 22 September 2022, Beijing
International Association for Shells and Spatial Structures (IASS)..
https://hdl.handle.net/21.15107/rcub_raf_1757

Milošević J, Nestorović M. A continuum between sculptural and structural form in the Sutjeska Memorial. in Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference Innovation·Sustainability·Legacy 19 – 22 September 2022, Beijing. 2022;.
https://hdl.handle.net/21.15107/rcub_raf_1757 .

Milošević, Jelena, Nestorović, Miodrag, "A continuum between sculptural and structural form in the Sutjeska Memorial" in Proceedings of the IASS 2022 Symposium affiliated with APCS 2022 conference Innovation·Sustainability·Legacy 19 – 22 September 2022, Beijing (2022),
https://hdl.handle.net/21.15107/rcub_raf_1757 .

TY  - JOUR
AU  - Nestorović, Miodrag
AU  - Milošević, Jelena
PY  - 2022
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1752
AB  - This article presents George Zlokovic (1927-2017) a Serbian architect, civil and structural engineer, doctor of technical sciences, university professor, and academician, highlighting the importance of his work in relation to the context in which he created and indirectly through the impact he made on the generations of students, engineers, and architects. The goal of the article is to compile and summarize 90 years of an exceptionally creative life based on relevant sources – publications, archive material, and personal relationships of the authors - associates of academician Zlokovic. The article includes a brief CV, description, and interpretation of diverse aspects of Zlokovic's work - professional, scientific, and educational, illustrating the professional multifacetedness of this featured individual.
PB  - Taylor & Francis
T2  - Structural Engineering International
T1  - Eminent Structural Engineer: Academician George Zlokovic (1927–2017)
VL  - 32
IS  - 3
DO  - 10.1080/10168664.2021.2004972
ER  - 

@article{
author = "Nestorović, Miodrag and Milošević, Jelena",
year = "2022",
abstract = "This article presents George Zlokovic (1927-2017) a Serbian architect, civil and structural engineer, doctor of technical sciences, university professor, and academician, highlighting the importance of his work in relation to the context in which he created and indirectly through the impact he made on the generations of students, engineers, and architects. The goal of the article is to compile and summarize 90 years of an exceptionally creative life based on relevant sources – publications, archive material, and personal relationships of the authors - associates of academician Zlokovic. The article includes a brief CV, description, and interpretation of diverse aspects of Zlokovic's work - professional, scientific, and educational, illustrating the professional multifacetedness of this featured individual.",
publisher = "Taylor & Francis",
journal = "Structural Engineering International",
title = "Eminent Structural Engineer: Academician George Zlokovic (1927–2017)",
volume = "32",
number = "3",
doi = "10.1080/10168664.2021.2004972"
}

Nestorović, M.,& Milošević, J.. (2022). Eminent Structural Engineer: Academician George Zlokovic (1927–2017). in Structural Engineering International
Taylor & Francis., 32(3).
https://doi.org/10.1080/10168664.2021.2004972

Nestorović M, Milošević J. Eminent Structural Engineer: Academician George Zlokovic (1927–2017). in Structural Engineering International. 2022;32(3).
doi:10.1080/10168664.2021.2004972 .

Nestorović, Miodrag, Milošević, Jelena, "Eminent Structural Engineer: Academician George Zlokovic (1927–2017)" in Structural Engineering International, 32, no. 3 (2022),
https://doi.org/10.1080/10168664.2021.2004972 . .

TY  - JOUR
AU  - Nestorović, Miodrag
AU  - Nestorović, Predrag
AU  - Milošević, Jelena
PY  - 2017
UR  - https://raf.arh.bg.ac.rs/handle/123456789/266
AB  - This paper is related to the fact that use of computational tools for form generation, analysis and digital fabrication (CAD/CAM/CAE) in an efficient way enables accurate representation of ideas, simulation of diverse impact and production of rational design solutions. Application of geometrical and numerical computational methods and adoption of performance based priorities enables formal exploration in constrained conditions and improvement of architectural engineering design process. Implementation of advanced technologies in 3D digital design process facilitates production of unconventional complex designs, their verification by construction of physical models and experimental diagnostics, as phase preceding construction of real structure. Within this work concept that provides design of non-standard, context-specific, freeform structure using rapid prototyping technology and 3D optical measurement will be reviewed. The analyzed design solution of roof structure above atrium of National Museum in Belgrade has a function to demonstrate the effectiveness of this approach.
AB  - Rad je povezan sa činjenicom da je korišćenjem alata za generisanje forme, analizu i digitalnu proizvodnju (CAD/CAM/CAE) na efikasan način omogućena precizna prezentacija ideja, simulacija različitih uticaja i produkcija racionalnih projektnih rešenja. Primena geometrijskih i numeričkih kompjuterskih metoda i usvajanja prioriteta zasnovanih na performansama omogućava formalna istraživanja u ograničenim uslovima i unapređenje procesa projektovanja u oblasti arhitektonskog inženjerstva. Implementacija naprednih digitalnih tehnologija u 3D proces projektovanja omogućava produkciju nekonvencionalnih kompleksnih oblika, njihovu verifikaciju konstrukcijom fizičkih modela i eksperimentalnu dijagnostiku, kao faze koja prethode izgradnji realne strukture. U okvirima ovog rada razmatraće se koncepti koji omogućavaju projektovanje nestandardne, kontekstualno specifične strukture slobodne forme primenom tehnologije brze proizvodnje prototipova i 3D optičkog merenje. Analizirano projektno rešenje krova iznad atrijuma Narodnog Muzeja u Beogradu u funkciji je potvrđivanja efikasnosti ovakvog pristupa.
PB  - Univerzitet u Nišu, Niš
T2  - Facta universitatis - series: Architecture and Civil Engineering
T1  - Performance based approach in design of freeform space structures
T1  - Pristup zasnovan na performansama u projektovanju prostornih struktura slobodne forme
VL  - 15
IS  - 2
SP  - 153
EP  - 166
DO  - 10.2298/FUACE160404011N
ER  - 

@article{
author = "Nestorović, Miodrag and Nestorović, Predrag and Milošević, Jelena",
year = "2017",
abstract = "This paper is related to the fact that use of computational tools for form generation, analysis and digital fabrication (CAD/CAM/CAE) in an efficient way enables accurate representation of ideas, simulation of diverse impact and production of rational design solutions. Application of geometrical and numerical computational methods and adoption of performance based priorities enables formal exploration in constrained conditions and improvement of architectural engineering design process. Implementation of advanced technologies in 3D digital design process facilitates production of unconventional complex designs, their verification by construction of physical models and experimental diagnostics, as phase preceding construction of real structure. Within this work concept that provides design of non-standard, context-specific, freeform structure using rapid prototyping technology and 3D optical measurement will be reviewed. The analyzed design solution of roof structure above atrium of National Museum in Belgrade has a function to demonstrate the effectiveness of this approach., Rad je povezan sa činjenicom da je korišćenjem alata za generisanje forme, analizu i digitalnu proizvodnju (CAD/CAM/CAE) na efikasan način omogućena precizna prezentacija ideja, simulacija različitih uticaja i produkcija racionalnih projektnih rešenja. Primena geometrijskih i numeričkih kompjuterskih metoda i usvajanja prioriteta zasnovanih na performansama omogućava formalna istraživanja u ograničenim uslovima i unapređenje procesa projektovanja u oblasti arhitektonskog inženjerstva. Implementacija naprednih digitalnih tehnologija u 3D proces projektovanja omogućava produkciju nekonvencionalnih kompleksnih oblika, njihovu verifikaciju konstrukcijom fizičkih modela i eksperimentalnu dijagnostiku, kao faze koja prethode izgradnji realne strukture. U okvirima ovog rada razmatraće se koncepti koji omogućavaju projektovanje nestandardne, kontekstualno specifične strukture slobodne forme primenom tehnologije brze proizvodnje prototipova i 3D optičkog merenje. Analizirano projektno rešenje krova iznad atrijuma Narodnog Muzeja u Beogradu u funkciji je potvrđivanja efikasnosti ovakvog pristupa.",
publisher = "Univerzitet u Nišu, Niš",
journal = "Facta universitatis - series: Architecture and Civil Engineering",
title = "Performance based approach in design of freeform space structures, Pristup zasnovan na performansama u projektovanju prostornih struktura slobodne forme",
volume = "15",
number = "2",
pages = "153-166",
doi = "10.2298/FUACE160404011N"
}

Nestorović, M., Nestorović, P.,& Milošević, J.. (2017). Performance based approach in design of freeform space structures. in Facta universitatis - series: Architecture and Civil Engineering
Univerzitet u Nišu, Niš., 15(2), 153-166.
https://doi.org/10.2298/FUACE160404011N

Nestorović M, Nestorović P, Milošević J. Performance based approach in design of freeform space structures. in Facta universitatis - series: Architecture and Civil Engineering. 2017;15(2):153-166.
doi:10.2298/FUACE160404011N .

Nestorović, Miodrag, Nestorović, Predrag, Milošević, Jelena, "Performance based approach in design of freeform space structures" in Facta universitatis - series: Architecture and Civil Engineering, 15, no. 2 (2017):153-166,
https://doi.org/10.2298/FUACE160404011N . .

TY  - CONF
AU  - Milošević, Jelena
AU  - Nestorović, Miodrag
PY  - 2017
UR  - https://raf.arh.bg.ac.rs/handle/123456789/575
AB  - This paper explores the concept of reverse analogies in biomimetic design of architectural structures. Design
paradigms based on biological models are engaged in appropriation of the biological forms, processes and
terminology. They are grounded in multidisciplinary studies of modes of transposition and implementation of identified
principles and natural laws in the discourse of spatial design with the goal of realization of optimal solutions that have
certain desired attributes of the biological systems. On the other hand, reverse analogies are related to the application
of concepts initially developed in architecture for research in different fields. It should be made distinction between
nature as a source of explanation and source of inspiration. While in the context of natural sciences validity of the
analogy is essentially important, in the case when the natural phenomena are used as a starting position for design
research week form of analogy is tolerable. Even misinterpretations and heretical concepts could be simulative for
design. The main advantage of the reverse analogies is in application of the freedom and liberal nature of the
architecture that enables development of the concepts out of pure design reasons. Sometimes in the modelling of the
phenomena not explained by the nature this approach could be simulative and catalytic. The goal of this paper is to
exploit potentials of reverse analogies for deriving patterns or feedback data that can be used for conception and
development of strategies and tools, or as an inspiration for formulation of intern morphological processes in design
of architectural structures.
PB  - Sarajevo : Arhitektonski fakultet
C3  - Keeping up with technologies in the context of urban and rural synergy [Elektronski izvor] : book of conference proceedings / [4th International academic conference] Places and technologies 2017, Sarajevo, June, 08th - 09th, 2017
T1  - Reverse biomimetic analogies in design of architectural  structures
SP  - 707
EP  - 716
UR  - https://hdl.handle.net/21.15107/rcub_raf_575
ER  - 

@conference{
author = "Milošević, Jelena and Nestorović, Miodrag",
year = "2017",
abstract = "This paper explores the concept of reverse analogies in biomimetic design of architectural structures. Design
paradigms based on biological models are engaged in appropriation of the biological forms, processes and
terminology. They are grounded in multidisciplinary studies of modes of transposition and implementation of identified
principles and natural laws in the discourse of spatial design with the goal of realization of optimal solutions that have
certain desired attributes of the biological systems. On the other hand, reverse analogies are related to the application
of concepts initially developed in architecture for research in different fields. It should be made distinction between
nature as a source of explanation and source of inspiration. While in the context of natural sciences validity of the
analogy is essentially important, in the case when the natural phenomena are used as a starting position for design
research week form of analogy is tolerable. Even misinterpretations and heretical concepts could be simulative for
design. The main advantage of the reverse analogies is in application of the freedom and liberal nature of the
architecture that enables development of the concepts out of pure design reasons. Sometimes in the modelling of the
phenomena not explained by the nature this approach could be simulative and catalytic. The goal of this paper is to
exploit potentials of reverse analogies for deriving patterns or feedback data that can be used for conception and
development of strategies and tools, or as an inspiration for formulation of intern morphological processes in design
of architectural structures.",
publisher = "Sarajevo : Arhitektonski fakultet",
journal = "Keeping up with technologies in the context of urban and rural synergy [Elektronski izvor] : book of conference proceedings / [4th International academic conference] Places and technologies 2017, Sarajevo, June, 08th - 09th, 2017",
title = "Reverse biomimetic analogies in design of architectural  structures",
pages = "707-716",
url = "https://hdl.handle.net/21.15107/rcub_raf_575"
}

Milošević, J.,& Nestorović, M.. (2017). Reverse biomimetic analogies in design of architectural  structures. in Keeping up with technologies in the context of urban and rural synergy [Elektronski izvor] : book of conference proceedings / [4th International academic conference] Places and technologies 2017, Sarajevo, June, 08th - 09th, 2017
Sarajevo : Arhitektonski fakultet., 707-716.
https://hdl.handle.net/21.15107/rcub_raf_575

Milošević J, Nestorović M. Reverse biomimetic analogies in design of architectural  structures. in Keeping up with technologies in the context of urban and rural synergy [Elektronski izvor] : book of conference proceedings / [4th International academic conference] Places and technologies 2017, Sarajevo, June, 08th - 09th, 2017. 2017;:707-716.
https://hdl.handle.net/21.15107/rcub_raf_575 .

Milošević, Jelena, Nestorović, Miodrag, "Reverse biomimetic analogies in design of architectural  structures" in Keeping up with technologies in the context of urban and rural synergy [Elektronski izvor] : book of conference proceedings / [4th International academic conference] Places and technologies 2017, Sarajevo, June, 08th - 09th, 2017 (2017):707-716,
https://hdl.handle.net/21.15107/rcub_raf_575 .

TY  - JOUR
AU  - Brajković, Jelena
AU  - Nestorović, Miodrag
PY  - 2017
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1150
AB  - The emergence and the development of new media forms took many diverse directions at the end of the twentieth and the beginning of the twenty first century, significantly influencing many areas of everyday life, as well as contemporary architectural practice. New types of architectural space emerged, types that are based on both new media and architectural principles. These spaces are screen, interactive, kinetic, biotechnological, as well as environments of light. These kind of environments gained new principles and features well known in new media field. Especially important for architectural context is the great potential of new media to create illusions and simulations, to produce augmented and composite, virtual realities and spaces. Virtual space represents one of the most challenging form of new media space. It is also the most complex form of screen media environments, so complex that it has taken its own, radical course. Besides the most advanced and complex, screen media interfaces also represent the oldest and typical forms of media architecture. This article will analyze emergence of screen interfaces in architecture, discuss their forms and modalities and examine their influence on human impression of space.
PB  - Belgrade : University of Belgrade, Faculty of Architecture
T2  - SAJ : Serbian architectural journal
T1  - Screen media interfaces and environments
VL  - 9
IS  - 1
SP  - 83
EP  - 104
UR  - https://hdl.handle.net/21.15107/rcub_raf_1150
ER  - 

@article{
author = "Brajković, Jelena and Nestorović, Miodrag",
year = "2017",
abstract = "The emergence and the development of new media forms took many diverse directions at the end of the twentieth and the beginning of the twenty first century, significantly influencing many areas of everyday life, as well as contemporary architectural practice. New types of architectural space emerged, types that are based on both new media and architectural principles. These spaces are screen, interactive, kinetic, biotechnological, as well as environments of light. These kind of environments gained new principles and features well known in new media field. Especially important for architectural context is the great potential of new media to create illusions and simulations, to produce augmented and composite, virtual realities and spaces. Virtual space represents one of the most challenging form of new media space. It is also the most complex form of screen media environments, so complex that it has taken its own, radical course. Besides the most advanced and complex, screen media interfaces also represent the oldest and typical forms of media architecture. This article will analyze emergence of screen interfaces in architecture, discuss their forms and modalities and examine their influence on human impression of space.",
publisher = "Belgrade : University of Belgrade, Faculty of Architecture",
journal = "SAJ : Serbian architectural journal",
title = "Screen media interfaces and environments",
volume = "9",
number = "1",
pages = "83-104",
url = "https://hdl.handle.net/21.15107/rcub_raf_1150"
}

Brajković, J.,& Nestorović, M.. (2017). Screen media interfaces and environments. in SAJ : Serbian architectural journal
Belgrade : University of Belgrade, Faculty of Architecture., 9(1), 83-104.
https://hdl.handle.net/21.15107/rcub_raf_1150

Brajković J, Nestorović M. Screen media interfaces and environments. in SAJ : Serbian architectural journal. 2017;9(1):83-104.
https://hdl.handle.net/21.15107/rcub_raf_1150 .

Brajković, Jelena, Nestorović, Miodrag, "Screen media interfaces and environments" in SAJ : Serbian architectural journal, 9, no. 1 (2017):83-104,
https://hdl.handle.net/21.15107/rcub_raf_1150 .

TY  - JOUR
AU  - Nestorović, Miodrag
AU  - Milošević, Jelena
AU  - Nestorović, Predrag
AU  - Maneski, Miloš
PY  - 2016
UR  - https://raf.arh.bg.ac.rs/handle/123456789/210
AB  - The paper deals with the origami used as an abstract tool to describe and represent the form and the structure of physical objects. In that respect, the potentials of this interdisciplinary technique as a medium of exploration of structural forms was introduced in the semester project done within the course Structural Systems at the Belgrade University, Faculty of Architecture. The technique was used as an interface to gain cognitive experience on spatial transformation and computational design. Throughout the intensive project period divided into three successive stages, the objective was to test method which enabled students to analyze geometrical principles of folding in order to apply these principles in the development of new designs. The generative algorithm inspired by the technique of paper folding assisted form-finding. Resulting shapes were verified by a production of small scale prototype models. The applied method, as a guiding design principle, facilitated formal exploration and augmentation of the design process. At the end of the course, students got cognitive experience on structural forms, while this simple technique delivered richness in terms of design solutions.
PB  - Institut za arhitekturu i urbanizam Srbije, Beograd
T2  - Spatium
T1  - Instrumentalization of origami in construction of folded plate structures: Design, research and education
VL  - 1
IS  - 35
SP  - 22
EP  - 29
DO  - 10.2298/SPAT1635022N
ER  - 

@article{
author = "Nestorović, Miodrag and Milošević, Jelena and Nestorović, Predrag and Maneski, Miloš",
year = "2016",
abstract = "The paper deals with the origami used as an abstract tool to describe and represent the form and the structure of physical objects. In that respect, the potentials of this interdisciplinary technique as a medium of exploration of structural forms was introduced in the semester project done within the course Structural Systems at the Belgrade University, Faculty of Architecture. The technique was used as an interface to gain cognitive experience on spatial transformation and computational design. Throughout the intensive project period divided into three successive stages, the objective was to test method which enabled students to analyze geometrical principles of folding in order to apply these principles in the development of new designs. The generative algorithm inspired by the technique of paper folding assisted form-finding. Resulting shapes were verified by a production of small scale prototype models. The applied method, as a guiding design principle, facilitated formal exploration and augmentation of the design process. At the end of the course, students got cognitive experience on structural forms, while this simple technique delivered richness in terms of design solutions.",
publisher = "Institut za arhitekturu i urbanizam Srbije, Beograd",
journal = "Spatium",
title = "Instrumentalization of origami in construction of folded plate structures: Design, research and education",
volume = "1",
number = "35",
pages = "22-29",
doi = "10.2298/SPAT1635022N"
}

Nestorović, M., Milošević, J., Nestorović, P.,& Maneski, M.. (2016). Instrumentalization of origami in construction of folded plate structures: Design, research and education. in Spatium
Institut za arhitekturu i urbanizam Srbije, Beograd., 1(35), 22-29.
https://doi.org/10.2298/SPAT1635022N

Nestorović M, Milošević J, Nestorović P, Maneski M. Instrumentalization of origami in construction of folded plate structures: Design, research and education. in Spatium. 2016;1(35):22-29.
doi:10.2298/SPAT1635022N .

Nestorović, Miodrag, Milošević, Jelena, Nestorović, Predrag, Maneski, Miloš, "Instrumentalization of origami in construction of folded plate structures: Design, research and education" in Spatium, 1, no. 35 (2016):22-29,
https://doi.org/10.2298/SPAT1635022N . .

TY  - JOUR
AU  - Milošević, Jelena
AU  - Kovačević, Saša
AU  - Nestorović, Miodrag
PY  - 2016
UR  - https://raf.arh.bg.ac.rs/handle/123456789/226
AB  - The paper reviews potentials of the application of isogeometric analysis (IGA) in the pro­cesses of form-finding of shell structures. Shaping of those specific spatial structural typolo­gies is determined by consideration of the form-structure interrelation, therefore the sustainable approach to design implies application of form-finding techniques. In this paper, we applied the frequently used form-finding principle a inverted model strategy, more precisely concept of inverted displacements. Contrary to the similar studies which apply standard finite element (FE) discretization, we proposed an application of isogeometric modeling of the structure. Isogeome­try implies analysis based on the exact definition of the initial geometry, facilitating design and analysis by application on the single data type - model. Advantage of the conservation of geometric representation is especially evident in the case of shell structure designs, bearing in mind their continuously curved geometry. We applied NURBS based isogeometric analysis in which geometry and displacement field are described by NURBS surfaces. Modeling of the structural performances was conducted by isogeometric shell elements. Presented numerical experiment has a function to confirm the effectiveness of the proposed approach.
AB  - Radom se razmatraju potencijali primene izogeometrijske analize u procesima traženja formi ljuski. Oblikovanje ovih specifičnih prostornih strukturalnih tipologija određeno je razmatranjem interrelacije forma-struktura, zbog čega održivi pristup njihovom projektovanju podra­zumeva primenu tehnika traženja forme. U okviru ovog rada primenjena je strategija obrnutog modela, često korišćen princip traženja forme, tačnije koncept obrnutih pomeranja. Za razliku od sličnih istraživanja u kojima se koristi standardna diskretizacija konačnim elementima (FE), ovim radom se predlaže izogeometrijsko modelovanje strukture. Izogeometrija podrazumeva analizu zasnovanu na egzaktnoj definiciji početne geometrije, čime je omogućeno projektovanje i analiza upotrebom jedinstvenog tipa podataka - modela. Prednost konzervacije geometrijske reprezentacije posebno dolazi do izražaja u slučaju projektovanja ljuski imajući u vidu njihovu kontinualno zakrivljenu geometriju. Primenjena je NURBS izogeometrijska analiza, u kojoj se geometrija i polje pomeranja opisuju korišćenjem NURBS površi. Modelovanje strukturalnih performansi izvršeno je korišćenjem izogeometrijskog elementa ljuske. Prikazan numerički ek­speriment u funkciji je potvrđivanja efikasnosti predloženog pristupa.
PB  - Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd
T2  - Izgradnja
T1  - Form-finding of shell structures based on isogeometric analysis
T1  - Traženje forme ljuski zasnovano na izogeometrijskoj analizi
VL  - 70
IS  - 9-12
SP  - 353
EP  - 360
UR  - https://hdl.handle.net/21.15107/rcub_raf_226
ER  - 

@article{
author = "Milošević, Jelena and Kovačević, Saša and Nestorović, Miodrag",
year = "2016",
abstract = "The paper reviews potentials of the application of isogeometric analysis (IGA) in the pro­cesses of form-finding of shell structures. Shaping of those specific spatial structural typolo­gies is determined by consideration of the form-structure interrelation, therefore the sustainable approach to design implies application of form-finding techniques. In this paper, we applied the frequently used form-finding principle a inverted model strategy, more precisely concept of inverted displacements. Contrary to the similar studies which apply standard finite element (FE) discretization, we proposed an application of isogeometric modeling of the structure. Isogeome­try implies analysis based on the exact definition of the initial geometry, facilitating design and analysis by application on the single data type - model. Advantage of the conservation of geometric representation is especially evident in the case of shell structure designs, bearing in mind their continuously curved geometry. We applied NURBS based isogeometric analysis in which geometry and displacement field are described by NURBS surfaces. Modeling of the structural performances was conducted by isogeometric shell elements. Presented numerical experiment has a function to confirm the effectiveness of the proposed approach., Radom se razmatraju potencijali primene izogeometrijske analize u procesima traženja formi ljuski. Oblikovanje ovih specifičnih prostornih strukturalnih tipologija određeno je razmatranjem interrelacije forma-struktura, zbog čega održivi pristup njihovom projektovanju podra­zumeva primenu tehnika traženja forme. U okviru ovog rada primenjena je strategija obrnutog modela, često korišćen princip traženja forme, tačnije koncept obrnutih pomeranja. Za razliku od sličnih istraživanja u kojima se koristi standardna diskretizacija konačnim elementima (FE), ovim radom se predlaže izogeometrijsko modelovanje strukture. Izogeometrija podrazumeva analizu zasnovanu na egzaktnoj definiciji početne geometrije, čime je omogućeno projektovanje i analiza upotrebom jedinstvenog tipa podataka - modela. Prednost konzervacije geometrijske reprezentacije posebno dolazi do izražaja u slučaju projektovanja ljuski imajući u vidu njihovu kontinualno zakrivljenu geometriju. Primenjena je NURBS izogeometrijska analiza, u kojoj se geometrija i polje pomeranja opisuju korišćenjem NURBS površi. Modelovanje strukturalnih performansi izvršeno je korišćenjem izogeometrijskog elementa ljuske. Prikazan numerički ek­speriment u funkciji je potvrđivanja efikasnosti predloženog pristupa.",
publisher = "Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd",
journal = "Izgradnja",
title = "Form-finding of shell structures based on isogeometric analysis, Traženje forme ljuski zasnovano na izogeometrijskoj analizi",
volume = "70",
number = "9-12",
pages = "353-360",
url = "https://hdl.handle.net/21.15107/rcub_raf_226"
}

Milošević, J., Kovačević, S.,& Nestorović, M.. (2016). Form-finding of shell structures based on isogeometric analysis. in Izgradnja
Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd., 70(9-12), 353-360.
https://hdl.handle.net/21.15107/rcub_raf_226

Milošević J, Kovačević S, Nestorović M. Form-finding of shell structures based on isogeometric analysis. in Izgradnja. 2016;70(9-12):353-360.
https://hdl.handle.net/21.15107/rcub_raf_226 .

Milošević, Jelena, Kovačević, Saša, Nestorović, Miodrag, "Form-finding of shell structures based on isogeometric analysis" in Izgradnja, 70, no. 9-12 (2016):353-360,
https://hdl.handle.net/21.15107/rcub_raf_226 .

TY  - CONF
AU  - Milošević, Jelena
AU  - Šobić, Zoran
AU  - Nestorović, Miodrag
PY  - 2014
UR  - https://raf.arh.bg.ac.rs/handle/123456789/698
AB  - This paper reviews theme of generative convergence and its implications on the
relation between architecture and its production tools. Beside assimilation of digital
technologies, assigning of knowledge and appropriation of methods processes and
procedures of other disciplines also demarcate current architectural discourse.
Transfer of technologies, whereas technology does not infer just hardware but a
mode of system thinking, involves effort for their integration in a manner that should
correspond specific needs and conditions of architectural practice. The transposition
of creative tools influences re-thinking of design process in the course of the logic of
operation of applied tool enabling innovation and categorical transformations.
Focused on design of architectural structures an approach for performance-oriented
design generation will be presented. Concept of design process as a production
system enables application of different strategies, integration and convergence of
diverse production systems in a single meta-system. In order to operate in productive
way, these methods use CAD/CAM/CAE cross-platform and connect an object with
the set created by automated generative system, moving emphasis form a single
object to a system and its possibilities to produce variations. Goals of such
considerations are efficient use of resources and optimization of design process.
PB  - Belgrade : Faculty of Architecture
C3  - Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
T1  - Towards generative convergence in design of architectural structures
SP  - 744
EP  - 751
UR  - https://hdl.handle.net/21.15107/rcub_raf_698
ER  - 

@conference{
author = "Milošević, Jelena and Šobić, Zoran and Nestorović, Miodrag",
year = "2014",
abstract = "This paper reviews theme of generative convergence and its implications on the
relation between architecture and its production tools. Beside assimilation of digital
technologies, assigning of knowledge and appropriation of methods processes and
procedures of other disciplines also demarcate current architectural discourse.
Transfer of technologies, whereas technology does not infer just hardware but a
mode of system thinking, involves effort for their integration in a manner that should
correspond specific needs and conditions of architectural practice. The transposition
of creative tools influences re-thinking of design process in the course of the logic of
operation of applied tool enabling innovation and categorical transformations.
Focused on design of architectural structures an approach for performance-oriented
design generation will be presented. Concept of design process as a production
system enables application of different strategies, integration and convergence of
diverse production systems in a single meta-system. In order to operate in productive
way, these methods use CAD/CAM/CAE cross-platform and connect an object with
the set created by automated generative system, moving emphasis form a single
object to a system and its possibilities to produce variations. Goals of such
considerations are efficient use of resources and optimization of design process.",
publisher = "Belgrade : Faculty of Architecture",
journal = "Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014",
title = "Towards generative convergence in design of architectural structures",
pages = "744-751",
url = "https://hdl.handle.net/21.15107/rcub_raf_698"
}

Milošević, J., Šobić, Z.,& Nestorović, M.. (2014). Towards generative convergence in design of architectural structures. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
Belgrade : Faculty of Architecture., 744-751.
https://hdl.handle.net/21.15107/rcub_raf_698

Milošević J, Šobić Z, Nestorović M. Towards generative convergence in design of architectural structures. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014. 2014;:744-751.
https://hdl.handle.net/21.15107/rcub_raf_698 .

Milošević, Jelena, Šobić, Zoran, Nestorović, Miodrag, "Towards generative convergence in design of architectural structures" in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014 (2014):744-751,
https://hdl.handle.net/21.15107/rcub_raf_698 .

TY  - CONF
AU  - Šobić, Zoran
AU  - Milošević, Jelena
AU  - Nestorović, Miodrag
PY  - 2014
UR  - https://raf.arh.bg.ac.rs/handle/123456789/701
AB  - The construction industry is a vital part of the growth and success of a country. It is
responsible for building the physical infrastructure that provides transportation and
facilities for citizens, businesses, industries and institutions. Construction has a major
influence on the economic wealth, societal well-being and sustainability of the built
environment. This paper presents the structural behaviour of new composite concrete
slab system with profiled steel sheeting and lightweight concrete fill. The system has
potentials to become well accepted by the construction industry due to the many
advantages over other types of floor systems. The slab is created by composite
interaction between the concrete and steel deck with reinforcement to improve their
bending resistant characteristics. Profiled steel deck performs two major functions
that act as a permanent formwork during the concrete casting and also as tensile
reinforcement after the concrete has hardened. The only additional nominal light
mesh reinforcement bars that needs to be provided is to take care of shrinkage and
temperature, usually in the form of welded wire fabric. Steel possesses a unique
material property unrivalled by other materials in that it can be recycled both up and
down the product value chain without degrading its structural strength and other
chemical properties. Open loop recycling allows an old structure to be melted down,
and then, when is recycled, it is re-melted to produce new appliances, structural
beams, cladding and decking. Presented research focuses also on economic
parameters of the topic, giving examples for some typical spans, in relationship with
transportation needs, technology aspects and estimated time.
PB  - Belgrade : Faculty of Architecture
C3  - Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
T1  - New composite slab system – lightweight concrete, steel sheeting and reinforcement
SP  - 780
EP  - 787
UR  - https://hdl.handle.net/21.15107/rcub_raf_701
ER  - 

@conference{
author = "Šobić, Zoran and Milošević, Jelena and Nestorović, Miodrag",
year = "2014",
abstract = "The construction industry is a vital part of the growth and success of a country. It is
responsible for building the physical infrastructure that provides transportation and
facilities for citizens, businesses, industries and institutions. Construction has a major
influence on the economic wealth, societal well-being and sustainability of the built
environment. This paper presents the structural behaviour of new composite concrete
slab system with profiled steel sheeting and lightweight concrete fill. The system has
potentials to become well accepted by the construction industry due to the many
advantages over other types of floor systems. The slab is created by composite
interaction between the concrete and steel deck with reinforcement to improve their
bending resistant characteristics. Profiled steel deck performs two major functions
that act as a permanent formwork during the concrete casting and also as tensile
reinforcement after the concrete has hardened. The only additional nominal light
mesh reinforcement bars that needs to be provided is to take care of shrinkage and
temperature, usually in the form of welded wire fabric. Steel possesses a unique
material property unrivalled by other materials in that it can be recycled both up and
down the product value chain without degrading its structural strength and other
chemical properties. Open loop recycling allows an old structure to be melted down,
and then, when is recycled, it is re-melted to produce new appliances, structural
beams, cladding and decking. Presented research focuses also on economic
parameters of the topic, giving examples for some typical spans, in relationship with
transportation needs, technology aspects and estimated time.",
publisher = "Belgrade : Faculty of Architecture",
journal = "Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014",
title = "New composite slab system – lightweight concrete, steel sheeting and reinforcement",
pages = "780-787",
url = "https://hdl.handle.net/21.15107/rcub_raf_701"
}

Šobić, Z., Milošević, J.,& Nestorović, M.. (2014). New composite slab system – lightweight concrete, steel sheeting and reinforcement. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
Belgrade : Faculty of Architecture., 780-787.
https://hdl.handle.net/21.15107/rcub_raf_701

Šobić Z, Milošević J, Nestorović M. New composite slab system – lightweight concrete, steel sheeting and reinforcement. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014. 2014;:780-787.
https://hdl.handle.net/21.15107/rcub_raf_701 .

Šobić, Zoran, Milošević, Jelena, Nestorović, Miodrag, "New composite slab system – lightweight concrete, steel sheeting and reinforcement" in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014 (2014):780-787,
https://hdl.handle.net/21.15107/rcub_raf_701 .

TY  - JOUR
AU  - Milošević, Jelena
AU  - Nestorović, Miodrag
AU  - Šobić, Zoran S.
PY  - 2013
UR  - https://raf.arh.bg.ac.rs/handle/123456789/143
AB  - The paper reviews possibilities of application of structural performance-based methods for production of geometrically complex, non-conventional architectural forms. Starting from the fact that advanced digital technologies and multidisciplinary approach have significantly changed traditional relations in design process, this work indicates at potentials of application of methods, procedures and tools initially not designed for architectural production. Based on biological paradigm, morphogenetic strategies in the field of architecture represent dynamic operation-based form-finding methods. The focus of the paper will be on conceptualization of morphogenetic procedure for production of integrated morphologic solutions which are characterized by optimal form-structure interdependence. The procedure is based on isogeometric concept, which enables integration of CAD and FEA. Compared to the conventional FEA, in which geometric interpolation is carried, the isogeometry analysis is based on exactly defined initial geometry, thus enabling design, analysis and refinement of models by using a single data type, which considerably facilitates and accelerates the process of repeated analysis of variant forms. The objective of this paper is to confirm the thesis that transposition, advancement and integration of creative tools affect reconsideration of conventional approaches, methods and procedures, thus enabling innovation and optimization of the design process.
AB  - Radom se razmatra mogućnost upotrebe metoda zasnovanih na strukturalnim performansama u produkciji geometrijski kompleksnih nekonvencionalnih arhitektonskih formi. Polazeći od činjenice da su napredne digitalne tehnologije i multidisciplinarni pristup u značajnoj meri izmenili tradicionalne relacije procesa projektovanja, ukazuje se na potencijale korišćenja metoda, procesa i alata koji inicijalno nisu namenjeni arhitektonskoj produkciji. Bazirane na biološkoj paradigmi, morfogenetske strategije u oblasti arhitekture predstavljaju dinamične operaciono-zasnovane metode za pronalaženje forme (form-finding). Težište rada biće na koncipiranju morfogenetske procedure za dizajn integrisanih morfoloških rešenja koje karakteriše optimalna međuzavisnost forma-struktura. Procedura se zasniva na korišćenju izogeometrijskog koncepta, kojim je omogućena integracija CAD i FEA. Za razliku od klasične FEA, u kojoj se vrši interpolacija geometrije, u izogeometriji analiza se vrši na osnovu egzaktno definisane početne geometrije, čime je omogućen dizajn, analiza i podešavanje modela upotrebom jedinstvenog tipa podataka, a što značajno olakšava i ubrzava proces uzastopnih analiza varijantnih formi. Rad je u funkciji potvrđivanja teze da transpozicija, unapređenje i integracija kreativnih alata utiču na preispitivanje konvencionalnih pristupa, metoda i procedura omogućavajući inovaciju i optimizaciju samog procesa projektovanja.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Structural morphogenesis: Concept of generative procedure for design of architectural form
T1  - Strukturalna morfogeneza - koncept generativne procedure za dizajn arhitektonske forme
VL  - 68
IS  - 4
SP  - 601
EP  - 608
UR  - https://hdl.handle.net/21.15107/rcub_raf_143
ER  - 

@article{
author = "Milošević, Jelena and Nestorović, Miodrag and Šobić, Zoran S.",
year = "2013",
abstract = "The paper reviews possibilities of application of structural performance-based methods for production of geometrically complex, non-conventional architectural forms. Starting from the fact that advanced digital technologies and multidisciplinary approach have significantly changed traditional relations in design process, this work indicates at potentials of application of methods, procedures and tools initially not designed for architectural production. Based on biological paradigm, morphogenetic strategies in the field of architecture represent dynamic operation-based form-finding methods. The focus of the paper will be on conceptualization of morphogenetic procedure for production of integrated morphologic solutions which are characterized by optimal form-structure interdependence. The procedure is based on isogeometric concept, which enables integration of CAD and FEA. Compared to the conventional FEA, in which geometric interpolation is carried, the isogeometry analysis is based on exactly defined initial geometry, thus enabling design, analysis and refinement of models by using a single data type, which considerably facilitates and accelerates the process of repeated analysis of variant forms. The objective of this paper is to confirm the thesis that transposition, advancement and integration of creative tools affect reconsideration of conventional approaches, methods and procedures, thus enabling innovation and optimization of the design process., Radom se razmatra mogućnost upotrebe metoda zasnovanih na strukturalnim performansama u produkciji geometrijski kompleksnih nekonvencionalnih arhitektonskih formi. Polazeći od činjenice da su napredne digitalne tehnologije i multidisciplinarni pristup u značajnoj meri izmenili tradicionalne relacije procesa projektovanja, ukazuje se na potencijale korišćenja metoda, procesa i alata koji inicijalno nisu namenjeni arhitektonskoj produkciji. Bazirane na biološkoj paradigmi, morfogenetske strategije u oblasti arhitekture predstavljaju dinamične operaciono-zasnovane metode za pronalaženje forme (form-finding). Težište rada biće na koncipiranju morfogenetske procedure za dizajn integrisanih morfoloških rešenja koje karakteriše optimalna međuzavisnost forma-struktura. Procedura se zasniva na korišćenju izogeometrijskog koncepta, kojim je omogućena integracija CAD i FEA. Za razliku od klasične FEA, u kojoj se vrši interpolacija geometrije, u izogeometriji analiza se vrši na osnovu egzaktno definisane početne geometrije, čime je omogućen dizajn, analiza i podešavanje modela upotrebom jedinstvenog tipa podataka, a što značajno olakšava i ubrzava proces uzastopnih analiza varijantnih formi. Rad je u funkciji potvrđivanja teze da transpozicija, unapređenje i integracija kreativnih alata utiču na preispitivanje konvencionalnih pristupa, metoda i procedura omogućavajući inovaciju i optimizaciju samog procesa projektovanja.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Structural morphogenesis: Concept of generative procedure for design of architectural form, Strukturalna morfogeneza - koncept generativne procedure za dizajn arhitektonske forme",
volume = "68",
number = "4",
pages = "601-608",
url = "https://hdl.handle.net/21.15107/rcub_raf_143"
}

Milošević, J., Nestorović, M.,& Šobić, Z. S.. (2013). Structural morphogenesis: Concept of generative procedure for design of architectural form. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 68(4), 601-608.
https://hdl.handle.net/21.15107/rcub_raf_143

Milošević J, Nestorović M, Šobić ZS. Structural morphogenesis: Concept of generative procedure for design of architectural form. in Tehnika. 2013;68(4):601-608.
https://hdl.handle.net/21.15107/rcub_raf_143 .

Milošević, Jelena, Nestorović, Miodrag, Šobić, Zoran S., "Structural morphogenesis: Concept of generative procedure for design of architectural form" in Tehnika, 68, no. 4 (2013):601-608,
https://hdl.handle.net/21.15107/rcub_raf_143 .

TY  - JOUR
AU  - Nestorović, Miodrag
AU  - Mišković, Vladimir
PY  - 2011
UR  - https://raf.arh.bg.ac.rs/handle/123456789/470
AB  - The emergence of the new architectural solutions and structural
forms of Mengeringhausen, Tsuboi, Safdie, Foster, Calatrava
and other creators of magnificent structures, may be taken as an
initiation and explosion of inventiveness which has continued
up to till present. Consequently, the topic of this paper is to
show a part of broad range of structural systems which have not
been sufficiently disclosed in Serbia and surroundings, in spite
of their attractiveness in contemporary architecture, in terms of
space transformations, materialization and technology.
The basic properties of all analyzed space structures lies in
their geometric shape (Archimedean and Platonic polyhedra,
polyhedron structures, and bionic of structures as well), which
applies regularity, symmetry, speed of mounting, as well as
modularity of the original matrices. Solutions and analyses
shown deal with multifunctional space matrices, which make
its potential very important both in architectural design and
in structural theory. The topic of this paper is to consider the
development of matrix structure in context of architectural forms
in future, emphasizing the importance of structural geometry
and its possible applications.
PB  - Belgrade : University of Belgrade, Faculty of Architecture
T2  - SAJ : Serbian architectural journal
T1  - Advanced Development of Space Structures in Domains of 3D Transformation
VL  - 3
IS  - 2
SP  - 116
EP  - 139
UR  - https://hdl.handle.net/21.15107/rcub_raf_470
ER  - 

@article{
author = "Nestorović, Miodrag and Mišković, Vladimir",
year = "2011",
abstract = "The emergence of the new architectural solutions and structural
forms of Mengeringhausen, Tsuboi, Safdie, Foster, Calatrava
and other creators of magnificent structures, may be taken as an
initiation and explosion of inventiveness which has continued
up to till present. Consequently, the topic of this paper is to
show a part of broad range of structural systems which have not
been sufficiently disclosed in Serbia and surroundings, in spite
of their attractiveness in contemporary architecture, in terms of
space transformations, materialization and technology.
The basic properties of all analyzed space structures lies in
their geometric shape (Archimedean and Platonic polyhedra,
polyhedron structures, and bionic of structures as well), which
applies regularity, symmetry, speed of mounting, as well as
modularity of the original matrices. Solutions and analyses
shown deal with multifunctional space matrices, which make
its potential very important both in architectural design and
in structural theory. The topic of this paper is to consider the
development of matrix structure in context of architectural forms
in future, emphasizing the importance of structural geometry
and its possible applications.",
publisher = "Belgrade : University of Belgrade, Faculty of Architecture",
journal = "SAJ : Serbian architectural journal",
title = "Advanced Development of Space Structures in Domains of 3D Transformation",
volume = "3",
number = "2",
pages = "116-139",
url = "https://hdl.handle.net/21.15107/rcub_raf_470"
}

Nestorović, M.,& Mišković, V.. (2011). Advanced Development of Space Structures in Domains of 3D Transformation. in SAJ : Serbian architectural journal
Belgrade : University of Belgrade, Faculty of Architecture., 3(2), 116-139.
https://hdl.handle.net/21.15107/rcub_raf_470

Nestorović M, Mišković V. Advanced Development of Space Structures in Domains of 3D Transformation. in SAJ : Serbian architectural journal. 2011;3(2):116-139.
https://hdl.handle.net/21.15107/rcub_raf_470 .

Nestorović, Miodrag, Mišković, Vladimir, "Advanced Development of Space Structures in Domains of 3D Transformation" in SAJ : Serbian architectural journal, 3, no. 2 (2011):116-139,
https://hdl.handle.net/21.15107/rcub_raf_470 .