TY  - JOUR
AU  - Kontić, Ana
AU  - Vasconcelos, Graça
AU  - Briceño Melendez, Carolina
AU  - Azenha, Miguel
AU  - Sokolović, Neda
PY  - 2023
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1479
AB  - Physical, mechanical and carbonation progress properties of air lime mortars, formulated with the addition of air entrainers, were analyzed, aiming to investigate the influence of air entrainers on abovementioned properties of lime-based products. Samples were cured in two curing conditions and their properties were evaluated after 14, 28, 60 and 90 days. The results obtained revealed that the addition of air entrainers influences the change in dynamics between drying and carbonation processes, therefore influencing the rate of carbonation process. This observation was reflected in carbonation progress as well as physical and mechanical properties of the tested samples.
PB  - Elsevier Ltd.
T2  - Construction and Building Materials
T1  - Influence of air entrainers on the properties of hydrated lime mortars
VL  - 403
SP  - 132968
DO  - 10.1016/j.conbuildmat.2023.132968
ER  - 

@article{
author = "Kontić, Ana and Vasconcelos, Graça and Briceño Melendez, Carolina and Azenha, Miguel and Sokolović, Neda",
year = "2023",
abstract = "Physical, mechanical and carbonation progress properties of air lime mortars, formulated with the addition of air entrainers, were analyzed, aiming to investigate the influence of air entrainers on abovementioned properties of lime-based products. Samples were cured in two curing conditions and their properties were evaluated after 14, 28, 60 and 90 days. The results obtained revealed that the addition of air entrainers influences the change in dynamics between drying and carbonation processes, therefore influencing the rate of carbonation process. This observation was reflected in carbonation progress as well as physical and mechanical properties of the tested samples.",
publisher = "Elsevier Ltd.",
journal = "Construction and Building Materials",
title = "Influence of air entrainers on the properties of hydrated lime mortars",
volume = "403",
pages = "132968",
doi = "10.1016/j.conbuildmat.2023.132968"
}

Kontić, A., Vasconcelos, G., Briceño Melendez, C., Azenha, M.,& Sokolović, N.. (2023). Influence of air entrainers on the properties of hydrated lime mortars. in Construction and Building Materials
Elsevier Ltd.., 403, 132968.
https://doi.org/10.1016/j.conbuildmat.2023.132968

Kontić A, Vasconcelos G, Briceño Melendez C, Azenha M, Sokolović N. Influence of air entrainers on the properties of hydrated lime mortars. in Construction and Building Materials. 2023;403:132968.
doi:10.1016/j.conbuildmat.2023.132968 .

Kontić, Ana, Vasconcelos, Graça, Briceño Melendez, Carolina, Azenha, Miguel, Sokolović, Neda, "Influence of air entrainers on the properties of hydrated lime mortars" in Construction and Building Materials, 403 (2023):132968,
https://doi.org/10.1016/j.conbuildmat.2023.132968 . .

TY  - JOUR
AU  - Terzović, Jefto
AU  - Kontić, Ana
AU  - Ilić, Isidora
PY  - 2022
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1480
AB  - In the proposed design concept, laminated glass and laminated plexiglass, as “unconventional
materials”, are considered as a filling in a steel frame on which they overlap by the intermediate rubber layer, thereby forming a composite assembly. In this way vertical elements of stiffening are formed, capable for reception of seismic force and integrated into the structural system of the building. The applicability of such a system was verified by experiments in laboratory conditions where the experimental models based on laminated glass and laminated plexiglass had been exposed to the cyclic loads that simulate the seismic force. In this way the load capacity of composite assemblies was tested for the effects of dynamic load that was parallel to assembly plane. Thus, the stress intensity to which composite systems might be exposed was determined as well as the range of the structure stiffening referring to the expressed deformation along with
the advantages of a particular type of filling compared to the other one. Using specialized software whose operation is based on the finite element method, a computer model of the structure was created and processed in the case study; the same computer model was used for analysing the problem in the first phase of the design process. The stiffening system based on composite assemblies tested in laboratories is implemented in the computer model. The results of the modal analysis and seismic calculation from the computer model with stiffeners applied showed an efficacy of such a solution, thus rounding the design procedures for aseismic stiffening by using unconventional materials.
PB  - Kalahari Journals
T2  - International Journal of Mechanical Engineering
T1  - Aseismic Stiffening of Architectural Buildings as Preventive Restoration Using Unconventional Materials
VL  - 7
IS  - 6
UR  - https://hdl.handle.net/21.15107/rcub_raf_1480
ER  - 

@article{
author = "Terzović, Jefto and Kontić, Ana and Ilić, Isidora",
year = "2022",
abstract = "In the proposed design concept, laminated glass and laminated plexiglass, as “unconventional
materials”, are considered as a filling in a steel frame on which they overlap by the intermediate rubber layer, thereby forming a composite assembly. In this way vertical elements of stiffening are formed, capable for reception of seismic force and integrated into the structural system of the building. The applicability of such a system was verified by experiments in laboratory conditions where the experimental models based on laminated glass and laminated plexiglass had been exposed to the cyclic loads that simulate the seismic force. In this way the load capacity of composite assemblies was tested for the effects of dynamic load that was parallel to assembly plane. Thus, the stress intensity to which composite systems might be exposed was determined as well as the range of the structure stiffening referring to the expressed deformation along with
the advantages of a particular type of filling compared to the other one. Using specialized software whose operation is based on the finite element method, a computer model of the structure was created and processed in the case study; the same computer model was used for analysing the problem in the first phase of the design process. The stiffening system based on composite assemblies tested in laboratories is implemented in the computer model. The results of the modal analysis and seismic calculation from the computer model with stiffeners applied showed an efficacy of such a solution, thus rounding the design procedures for aseismic stiffening by using unconventional materials.",
publisher = "Kalahari Journals",
journal = "International Journal of Mechanical Engineering",
title = "Aseismic Stiffening of Architectural Buildings as Preventive Restoration Using Unconventional Materials",
volume = "7",
number = "6",
url = "https://hdl.handle.net/21.15107/rcub_raf_1480"
}

Terzović, J., Kontić, A.,& Ilić, I.. (2022). Aseismic Stiffening of Architectural Buildings as Preventive Restoration Using Unconventional Materials. in International Journal of Mechanical Engineering
Kalahari Journals., 7(6).
https://hdl.handle.net/21.15107/rcub_raf_1480

Terzović J, Kontić A, Ilić I. Aseismic Stiffening of Architectural Buildings as Preventive Restoration Using Unconventional Materials. in International Journal of Mechanical Engineering. 2022;7(6).
https://hdl.handle.net/21.15107/rcub_raf_1480 .

Terzović, Jefto, Kontić, Ana, Ilić, Isidora, "Aseismic Stiffening of Architectural Buildings as Preventive Restoration Using Unconventional Materials" in International Journal of Mechanical Engineering, 7, no. 6 (2022),
https://hdl.handle.net/21.15107/rcub_raf_1480 .

TY  - JOUR
AU  - Vasovic, Dejan
AU  - Terzovic, Jefto
AU  - Kontic, Ana
AU  - Okrajnov-Bajic, Ruza
AU  - Sekularac, Nenad
PY  - 2021
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1481
AB  - Protecting the built cultural heritage is one of the most important tasks in architectural
practice. The process of repair is time-consuming, weather-dependent, and sensitive to materials
applied. Introducing new materials in historic building repair in order to decrease the time needed
for repair, brings some risk in the preservation process. The most common material for masonry
repair is lime mortar. Adding cement to lime mortar can improve the mechanical properties of mortar and speed up the repair process. The high amount of cement may increase the strength, but decrease ductility and permeability of mortar, causing damages to protected buildings. An increase in strength with the smallest amounts of cement demands optimization of water content in the mixture. Tests were performed to investigate the influence of the water/binder (w/b = water/(lime + cement) ratio on mortar strength and water permeability. An air-entraining agent (AEG) was introduced to improve permeability. Results confirmed that adding small amounts of cement to lime (20% by weight) and decreasing of w/b ratio, improves the strength, with almost negligible influence on water permeability. The addition of very small amounts of AEG did not decrease the strength, nor the permeability.
PB  - Basel : MDPI
T2  - Crystals
T1  - The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement
VL  - 11
IS  - 8
SP  - 958
DO  - 10.3390/cryst11080958
ER  - 

@article{
author = "Vasovic, Dejan and Terzovic, Jefto and Kontic, Ana and Okrajnov-Bajic, Ruza and Sekularac, Nenad",
year = "2021",
abstract = "Protecting the built cultural heritage is one of the most important tasks in architectural
practice. The process of repair is time-consuming, weather-dependent, and sensitive to materials
applied. Introducing new materials in historic building repair in order to decrease the time needed
for repair, brings some risk in the preservation process. The most common material for masonry
repair is lime mortar. Adding cement to lime mortar can improve the mechanical properties of mortar and speed up the repair process. The high amount of cement may increase the strength, but decrease ductility and permeability of mortar, causing damages to protected buildings. An increase in strength with the smallest amounts of cement demands optimization of water content in the mixture. Tests were performed to investigate the influence of the water/binder (w/b = water/(lime + cement) ratio on mortar strength and water permeability. An air-entraining agent (AEG) was introduced to improve permeability. Results confirmed that adding small amounts of cement to lime (20% by weight) and decreasing of w/b ratio, improves the strength, with almost negligible influence on water permeability. The addition of very small amounts of AEG did not decrease the strength, nor the permeability.",
publisher = "Basel : MDPI",
journal = "Crystals",
title = "The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement",
volume = "11",
number = "8",
pages = "958",
doi = "10.3390/cryst11080958"
}

Vasovic, D., Terzovic, J., Kontic, A., Okrajnov-Bajic, R.,& Sekularac, N.. (2021). The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement. in Crystals
Basel : MDPI., 11(8), 958.
https://doi.org/10.3390/cryst11080958

Vasovic D, Terzovic J, Kontic A, Okrajnov-Bajic R, Sekularac N. The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement. in Crystals. 2021;11(8):958.
doi:10.3390/cryst11080958 .

Vasovic, Dejan, Terzovic, Jefto, Kontic, Ana, Okrajnov-Bajic, Ruza, Sekularac, Nenad, "The Influence of Water/Binder Ratio on the Mechanical Properties of Lime-Based Mortars with White Portland Cement" in Crystals, 11, no. 8 (2021):958,
https://doi.org/10.3390/cryst11080958 . .

TY  - JOUR
AU  - Sokolović, Neda M.
AU  - Petrović, Milica
AU  - Kontić, Ana
AU  - Koprivica, Suzana
AU  - Šekularac, Nenad
PY  - 2021
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1209
AB  - The importance of masonry arch bridges as a traffic network element calls for a thorough
analysis focused on both structural stability and loading capacity of these historical structures, considering
the usage of these bridges in contemporary traffic conditions. This paper focuses on the analysis
of longitudinal cracks in a single span masonry arch bridge to evaluate its influence on structural
behaviour of the system. As longitudinal cracks do not necessarily present an inevitable collapse
mechanism, analysis of the causes is crucial for evaluating the serviceability and functionality of the
bridge investigated. The methodology is based on the following: literature review, observation of the
stone bridge in Ivanjica, geological testing of the site, geophysical testing of the bridge, laboratory
testing of mechanical characteristics of stone used for the bridge construction and biological analysis
of the samples of implemented materials on the bridge. Finite element analysis of the bridge was
conducted to define the causes of the longitudinal cracks. The 3D simulation model was based on
the data collected through observation and experimental analysis. This paper provides extensive
research on a single span masonry bridge, examining how different deterioration mechanisms, in
conjunction, can lead to the appearance of cracks in masonry arch bridges and provide remedial
measures accordingly.
PB  - MDPI
T2  - Sustainability
T1  - Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study
VL  - 13
IS  - 23
SP  - 13363
DO  - 10.3390/su132313363
ER  - 

@article{
author = "Sokolović, Neda M. and Petrović, Milica and Kontić, Ana and Koprivica, Suzana and Šekularac, Nenad",
year = "2021",
abstract = "The importance of masonry arch bridges as a traffic network element calls for a thorough
analysis focused on both structural stability and loading capacity of these historical structures, considering
the usage of these bridges in contemporary traffic conditions. This paper focuses on the analysis
of longitudinal cracks in a single span masonry arch bridge to evaluate its influence on structural
behaviour of the system. As longitudinal cracks do not necessarily present an inevitable collapse
mechanism, analysis of the causes is crucial for evaluating the serviceability and functionality of the
bridge investigated. The methodology is based on the following: literature review, observation of the
stone bridge in Ivanjica, geological testing of the site, geophysical testing of the bridge, laboratory
testing of mechanical characteristics of stone used for the bridge construction and biological analysis
of the samples of implemented materials on the bridge. Finite element analysis of the bridge was
conducted to define the causes of the longitudinal cracks. The 3D simulation model was based on
the data collected through observation and experimental analysis. This paper provides extensive
research on a single span masonry bridge, examining how different deterioration mechanisms, in
conjunction, can lead to the appearance of cracks in masonry arch bridges and provide remedial
measures accordingly.",
publisher = "MDPI",
journal = "Sustainability",
title = "Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study",
volume = "13",
number = "23",
pages = "13363",
doi = "10.3390/su132313363"
}

Sokolović, N. M., Petrović, M., Kontić, A., Koprivica, S.,& Šekularac, N.. (2021). Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study. in Sustainability
MDPI., 13(23), 13363.
https://doi.org/10.3390/su132313363

Sokolović NM, Petrović M, Kontić A, Koprivica S, Šekularac N. Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study. in Sustainability. 2021;13(23):13363.
doi:10.3390/su132313363 .

Sokolović, Neda M., Petrović, Milica, Kontić, Ana, Koprivica, Suzana, Šekularac, Nenad, "Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study" in Sustainability, 13, no. 23 (2021):13363,
https://doi.org/10.3390/su132313363 . .

TY  - CONF
AU  - Sokolović, Neda
AU  - Kontić, Ana
AU  - Josifovski, Andrej
PY  - 2020
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1496
AB  - The development of new materials and technologies is one of the greatest initiator of new architectural thought. Development within the long-standing continuous improvement of wood as material was induced by technological development and new market demands. Good mechanical and physical properties of wood and its easy accessibility, initiated further development and improvement of products based on this material. The aims of this improvement are more rational wood application and improvement of its physical and mechanical properties in regard to monolithic wood. In particular significant are wood-based products made from veneer layers, plywood and laminated veneer lumber (LVL). These materials stand out from other wood-based panel materials due to their mechanical and aesthetic performance. Previous application of veneer-based panels as a structural element in architecture has been implied as secondary or tertiary structural elements which transfer the load to supporting structural members, or to stiffen wooden structures. Recognition a good mechanical property of the material and its advantages as a small self-weight encouraged examining the possibilities of using wood-based panel products as the primary structural support element in exoskeleton structures, i.e. using building envelope as object structure. Application plywood and LVL is research study, so in this paper authors will analyze the possibilities of using these products as an exoskeleton supporting element, through case studies of realized experimental structures. Through research realised structures will be analysed, with a focus on shell structures. They will be evaluated through recognition of its advantages and disadvantages, especially those are directly conditioned by the structural characteristics of the material. Analyses of structures will be done according following criteria: structure design, spatial stability, span constraints, possibilities of loads the structure can support and connections between elements. In order to encourage use of veneer-based panels as load-bearing element in the exoskeleton structure, the paper will set guidelines for further research in this area and will recommend possibilities to improve mechanical characteristics of material. Rationalization of the use of wood-based panels in folded structures will highlight in paper. Forming exoskeleton structure from this material contributes rational use of the structure and raw wood materials saving.
PB  - Belgrade : University of Belgrade - Faculty of Architecture
C3  - Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies
T1  - Application of veneer based panels in Exoskeleton Architecture
DO  - 10.18485/arh_pt.2020.7.ch21
ER  - 

@conference{
author = "Sokolović, Neda and Kontić, Ana and Josifovski, Andrej",
year = "2020",
abstract = "The development of new materials and technologies is one of the greatest initiator of new architectural thought. Development within the long-standing continuous improvement of wood as material was induced by technological development and new market demands. Good mechanical and physical properties of wood and its easy accessibility, initiated further development and improvement of products based on this material. The aims of this improvement are more rational wood application and improvement of its physical and mechanical properties in regard to monolithic wood. In particular significant are wood-based products made from veneer layers, plywood and laminated veneer lumber (LVL). These materials stand out from other wood-based panel materials due to their mechanical and aesthetic performance. Previous application of veneer-based panels as a structural element in architecture has been implied as secondary or tertiary structural elements which transfer the load to supporting structural members, or to stiffen wooden structures. Recognition a good mechanical property of the material and its advantages as a small self-weight encouraged examining the possibilities of using wood-based panel products as the primary structural support element in exoskeleton structures, i.e. using building envelope as object structure. Application plywood and LVL is research study, so in this paper authors will analyze the possibilities of using these products as an exoskeleton supporting element, through case studies of realized experimental structures. Through research realised structures will be analysed, with a focus on shell structures. They will be evaluated through recognition of its advantages and disadvantages, especially those are directly conditioned by the structural characteristics of the material. Analyses of structures will be done according following criteria: structure design, spatial stability, span constraints, possibilities of loads the structure can support and connections between elements. In order to encourage use of veneer-based panels as load-bearing element in the exoskeleton structure, the paper will set guidelines for further research in this area and will recommend possibilities to improve mechanical characteristics of material. Rationalization of the use of wood-based panels in folded structures will highlight in paper. Forming exoskeleton structure from this material contributes rational use of the structure and raw wood materials saving.",
publisher = "Belgrade : University of Belgrade - Faculty of Architecture",
journal = "Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies",
title = "Application of veneer based panels in Exoskeleton Architecture",
doi = "10.18485/arh_pt.2020.7.ch21"
}

Sokolović, N., Kontić, A.,& Josifovski, A.. (2020). Application of veneer based panels in Exoskeleton Architecture. in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies
Belgrade : University of Belgrade - Faculty of Architecture..
https://doi.org/10.18485/arh_pt.2020.7.ch21

Sokolović N, Kontić A, Josifovski A. Application of veneer based panels in Exoskeleton Architecture. in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies. 2020;.
doi:10.18485/arh_pt.2020.7.ch21 .

Sokolović, Neda, Kontić, Ana, Josifovski, Andrej, "Application of veneer based panels in Exoskeleton Architecture" in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies (2020),
https://doi.org/10.18485/arh_pt.2020.7.ch21 . .

TY  - CONF
AU  - Контић, Ана Д.
AU  - Обрадовић, Радојко
AU  - Петровић, Милица
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1668
AB  - Рад је усмерен на анализу конструктивног склопа заштитног објекта археолошког наслеђа, као израза инжењерског обликовања и архитектонске ликовности. У првом делу рада анализиране су актуелне одредбе у области заштите археолошког наслеђа, којима се дефинишу критеријуми за вредновање инжењерског обликовања примењеног конструктивног склопа. У другом делу рада, исти конструктивни склоп је посматран израз архитектонске ликовности, кроз анализу тектонике простора. Циљ истраживања је да се кроз анализу примера из праксе укаже на специфичност пројектовања и читања заштитних објеката археолошких налазишта, који може унапредити однос са археолошким наслеђем у будућем раду на реконструкцији.
PB  - Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts
C3  - Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied
T1  - Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности
SP  - 31
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_raf_1668
ER  - 

@conference{
author = "Контић, Ана Д. and Обрадовић, Радојко and Петровић, Милица",
year = "2019",
abstract = "Рад је усмерен на анализу конструктивног склопа заштитног објекта археолошког наслеђа, као израза инжењерског обликовања и архитектонске ликовности. У првом делу рада анализиране су актуелне одредбе у области заштите археолошког наслеђа, којима се дефинишу критеријуми за вредновање инжењерског обликовања примењеног конструктивног склопа. У другом делу рада, исти конструктивни склоп је посматран израз архитектонске ликовности, кроз анализу тектонике простора. Циљ истраживања је да се кроз анализу примера из праксе укаже на специфичност пројектовања и читања заштитних објеката археолошких налазишта, који може унапредити однос са археолошким наслеђем у будућем раду на реконструкцији.",
publisher = "Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts",
journal = "Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied",
title = "Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности",
pages = "31-32",
url = "https://hdl.handle.net/21.15107/rcub_raf_1668"
}

Контић, А. Д., Обрадовић, Р.,& Петровић, М.. (2019). Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности. in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied
Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts., 31-32.
https://hdl.handle.net/21.15107/rcub_raf_1668

Контић АД, Обрадовић Р, Петровић М. Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности. in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied. 2019;:31-32.
https://hdl.handle.net/21.15107/rcub_raf_1668 .

Контић, Ана Д., Обрадовић, Радојко, Петровић, Милица, "Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности" in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied (2019):31-32,
https://hdl.handle.net/21.15107/rcub_raf_1668 .

TY  - BOOK
AU  - Obradović, Radojko
AU  - Petrović, Milica
AU  - Kontić, Ana
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1550
AB  - У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.
PB  - Универзитет у Београду- Архитектонски факултет
T1  - Принципи конструисања архитектонских објеката : практикум
UR  - https://hdl.handle.net/21.15107/rcub_raf_1550
ER  - 

@book{
author = "Obradović, Radojko and Petrović, Milica and Kontić, Ana",
year = "2019",
abstract = "У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.",
publisher = "Универзитет у Београду- Архитектонски факултет",
title = "Принципи конструисања архитектонских објеката : практикум",
url = "https://hdl.handle.net/21.15107/rcub_raf_1550"
}

Obradović, R., Petrović, M.,& Kontić, A.. (2019). Принципи конструисања архитектонских објеката : практикум. 
Универзитет у Београду- Архитектонски факултет..
https://hdl.handle.net/21.15107/rcub_raf_1550

Obradović R, Petrović M, Kontić A. Принципи конструисања архитектонских објеката : практикум. 2019;.
https://hdl.handle.net/21.15107/rcub_raf_1550 .

Obradović, Radojko, Petrović, Milica, Kontić, Ana, "Принципи конструисања архитектонских објеката : практикум" (2019),
https://hdl.handle.net/21.15107/rcub_raf_1550 .

TY  - CONF
AU  - Kontić, Ana
AU  - Lukić, Nevena
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/762
AB  - Traditional buildings are of great significance for exploring the architectural heritage and cultural
identity. Created in the local context, reflecting the attitude of people towards the environment,
these houses are built with traditional techniques and locally available building materials. In
Serbia, in Vojvodina region, and other regional flat land there is a rich history of use of earth
as a building material and a large number of traditional rammed earth houses to be held until
today. Most of these buildings are still in use, but often trumble-down and failing to fulfill
current living standards and needs. Because of that the need for preservation and renovation
of traditional buildings is recognised as an important step in the process of their recognition
as an important part of the architectural heritage of today. The problem is that the majority of
traditional architectural heritage has not been officially designated as a cultural asset or a part
of the cultural and historical sites, therefore it does not enjoy an adequate form of protection
which can cause degradation of buildings identity during preservation processes.
The main question of this research refers to appropriate ways of presentation of traditional
architecture, in order to recognize and provide a better understanding of architectural heritage
and cultural identity. Different approaches toward presentation of traditional buildings will be
analysed trough current framework of protection practice and case studies both in Serbia and
the region, pointing out possible problems and potentials in these actions as well as giving
recommendations for future treatment of this type of buildings. This research aims to find
solutions for adequate presentation of traditional buildings, pointing out their great significance
of architectural heritage, and also it serves as an experience to improve our own relationship
toward heritage in future work.
PB  - Pécs : University of Pécs Faculty of Engineering and Information Technology
C3  - Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019
T1  - The issue of preservation of traditional rammed earth houses: current practice of presentation in Serbia and region
SP  - 322
EP  - 330
UR  - https://hdl.handle.net/21.15107/rcub_raf_762
ER  - 

@conference{
author = "Kontić, Ana and Lukić, Nevena",
year = "2019",
abstract = "Traditional buildings are of great significance for exploring the architectural heritage and cultural
identity. Created in the local context, reflecting the attitude of people towards the environment,
these houses are built with traditional techniques and locally available building materials. In
Serbia, in Vojvodina region, and other regional flat land there is a rich history of use of earth
as a building material and a large number of traditional rammed earth houses to be held until
today. Most of these buildings are still in use, but often trumble-down and failing to fulfill
current living standards and needs. Because of that the need for preservation and renovation
of traditional buildings is recognised as an important step in the process of their recognition
as an important part of the architectural heritage of today. The problem is that the majority of
traditional architectural heritage has not been officially designated as a cultural asset or a part
of the cultural and historical sites, therefore it does not enjoy an adequate form of protection
which can cause degradation of buildings identity during preservation processes.
The main question of this research refers to appropriate ways of presentation of traditional
architecture, in order to recognize and provide a better understanding of architectural heritage
and cultural identity. Different approaches toward presentation of traditional buildings will be
analysed trough current framework of protection practice and case studies both in Serbia and
the region, pointing out possible problems and potentials in these actions as well as giving
recommendations for future treatment of this type of buildings. This research aims to find
solutions for adequate presentation of traditional buildings, pointing out their great significance
of architectural heritage, and also it serves as an experience to improve our own relationship
toward heritage in future work.",
publisher = "Pécs : University of Pécs Faculty of Engineering and Information Technology",
journal = "Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019",
title = "The issue of preservation of traditional rammed earth houses: current practice of presentation in Serbia and region",
pages = "322-330",
url = "https://hdl.handle.net/21.15107/rcub_raf_762"
}

Kontić, A.,& Lukić, N.. (2019). The issue of preservation of traditional rammed earth houses: current practice of presentation in Serbia and region. in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019
Pécs : University of Pécs Faculty of Engineering and Information Technology., 322-330.
https://hdl.handle.net/21.15107/rcub_raf_762

Kontić A, Lukić N. The issue of preservation of traditional rammed earth houses: current practice of presentation in Serbia and region. in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019. 2019;:322-330.
https://hdl.handle.net/21.15107/rcub_raf_762 .

Kontić, Ana, Lukić, Nevena, "The issue of preservation of traditional rammed earth houses: current practice of presentation in Serbia and region" in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019 (2019):322-330,
https://hdl.handle.net/21.15107/rcub_raf_762 .

TY  - JOUR
AU  - Kontić, Ana
AU  - Jadrešin-Milić, Renata
AU  - Mrlješ, Rade
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/333
AB  - The paper presents an overview of the results based on the integration of traditional (analogue) and instrumental (digital) methods of heritage surveying. The thematic framework was stimulated by participation at the professional workshop in Lizori, in Italy, held in June 2018.. This specific methodological framework of integrated research, uses different tools, in the function of morphological specifications of different parts of a historical building. The very nature of architectural heritage requires the integration of different methods in order to achieve an adequate level of accuracy. The project of digitization of the Lizori village aims to present, on the one hand, an almost unknown historical heritage through multimedia presentation, and on the other hand, set up an information tool for restoration, maintenance and valorization.
AB  - Rad predstavlja prikaz rezultata zasnovanog na integraciji tradicionalnih (analognih) i instrumentalnih (digitalnih) metoda snimanja nasleđa. Tematski okvir rada je podstaknut učešćem na stručnoj radionici u Lizoriju (Lizori), u Italiji, održanoj u junu 2018. godine. Ovaj specifični metodološki okvir integrisanog istraživanja koristi različite alate, u funkciji morfoloških specifikacija različitih delova istorijske građevine. Sama priroda arhitektonskog nasleđa nalaže integraciju različitih metoda u cilju postizanja adekvatnog nivoa tačnosti. Projekat digitalizacije zaseoka Lizori ima za cilj da, sa jedne strane, predstavi gotovo nepoznato istorijsko nasleđe kroz multimedijalnu prezentaciju, a sa druge strane, postavi alat za informisanje za restauraciju, održavanje i valorizaciju.
PB  - Institut za arhitekturu i urbanizam Srbije, Beograd
T2  - Arhitektura i urbanizam
T1  - Methodology of integrated survey in process of digital documentation of architectural heritage
T1  - Metodologija integrisanog istraživanja u procesu digitalne dokumentacije arhitektonskog nasleđa
IS  - 48
SP  - 28
EP  - 36
DO  - 10.5937/a-u0-21951
ER  - 

@article{
author = "Kontić, Ana and Jadrešin-Milić, Renata and Mrlješ, Rade",
year = "2019",
abstract = "The paper presents an overview of the results based on the integration of traditional (analogue) and instrumental (digital) methods of heritage surveying. The thematic framework was stimulated by participation at the professional workshop in Lizori, in Italy, held in June 2018.. This specific methodological framework of integrated research, uses different tools, in the function of morphological specifications of different parts of a historical building. The very nature of architectural heritage requires the integration of different methods in order to achieve an adequate level of accuracy. The project of digitization of the Lizori village aims to present, on the one hand, an almost unknown historical heritage through multimedia presentation, and on the other hand, set up an information tool for restoration, maintenance and valorization., Rad predstavlja prikaz rezultata zasnovanog na integraciji tradicionalnih (analognih) i instrumentalnih (digitalnih) metoda snimanja nasleđa. Tematski okvir rada je podstaknut učešćem na stručnoj radionici u Lizoriju (Lizori), u Italiji, održanoj u junu 2018. godine. Ovaj specifični metodološki okvir integrisanog istraživanja koristi različite alate, u funkciji morfoloških specifikacija različitih delova istorijske građevine. Sama priroda arhitektonskog nasleđa nalaže integraciju različitih metoda u cilju postizanja adekvatnog nivoa tačnosti. Projekat digitalizacije zaseoka Lizori ima za cilj da, sa jedne strane, predstavi gotovo nepoznato istorijsko nasleđe kroz multimedijalnu prezentaciju, a sa druge strane, postavi alat za informisanje za restauraciju, održavanje i valorizaciju.",
publisher = "Institut za arhitekturu i urbanizam Srbije, Beograd",
journal = "Arhitektura i urbanizam",
title = "Methodology of integrated survey in process of digital documentation of architectural heritage, Metodologija integrisanog istraživanja u procesu digitalne dokumentacije arhitektonskog nasleđa",
number = "48",
pages = "28-36",
doi = "10.5937/a-u0-21951"
}

Kontić, A., Jadrešin-Milić, R.,& Mrlješ, R.. (2019). Methodology of integrated survey in process of digital documentation of architectural heritage. in Arhitektura i urbanizam
Institut za arhitekturu i urbanizam Srbije, Beograd.(48), 28-36.
https://doi.org/10.5937/a-u0-21951

Kontić A, Jadrešin-Milić R, Mrlješ R. Methodology of integrated survey in process of digital documentation of architectural heritage. in Arhitektura i urbanizam. 2019;(48):28-36.
doi:10.5937/a-u0-21951 .

Kontić, Ana, Jadrešin-Milić, Renata, Mrlješ, Rade, "Methodology of integrated survey in process of digital documentation of architectural heritage" in Arhitektura i urbanizam, no. 48 (2019):28-36,
https://doi.org/10.5937/a-u0-21951 . .

TY  - JOUR
AU  - Kontic, Ana
AU  - Jadresin Milic, Renata
AU  - Mrljes, Rade
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1490
AB  - The aim of this paper is to define the methodology of integrated research in the process of digital documentation of architectural heritage. The thematic framework of this work was stimulated
by participation in a professional workshop in Lizori, Italy, held in June 2018. The paper presents a result based on the integration of traditional and instrumental methods of heritage surveying. This specific method of integrated research uses a variety of tools, in the process of morphological
specifications of different parts of a historic building. The specific nature of architectural heritage requires the integration of different methods in order to achieve a high level of accuracy. The
Lizori digitisation project, on the one hand, aims to present an almost unknown historical heritage through multimedia valorisation, and on the other, to set up an information tool for restoration, maintenance and valorisation.
PB  - University of L’Aquila
T2  - Disegnarecon
T1  - Defining the methodology of integrated research in the process of digital documentation of architectural heritage: case study Lizori, Italy
VL  - 12
IS  - 23
UR  - https://hdl.handle.net/21.15107/rcub_raf_1490
ER  - 

@article{
author = "Kontic, Ana and Jadresin Milic, Renata and Mrljes, Rade",
year = "2019",
abstract = "The aim of this paper is to define the methodology of integrated research in the process of digital documentation of architectural heritage. The thematic framework of this work was stimulated
by participation in a professional workshop in Lizori, Italy, held in June 2018. The paper presents a result based on the integration of traditional and instrumental methods of heritage surveying. This specific method of integrated research uses a variety of tools, in the process of morphological
specifications of different parts of a historic building. The specific nature of architectural heritage requires the integration of different methods in order to achieve a high level of accuracy. The
Lizori digitisation project, on the one hand, aims to present an almost unknown historical heritage through multimedia valorisation, and on the other, to set up an information tool for restoration, maintenance and valorisation.",
publisher = "University of L’Aquila",
journal = "Disegnarecon",
title = "Defining the methodology of integrated research in the process of digital documentation of architectural heritage: case study Lizori, Italy",
volume = "12",
number = "23",
url = "https://hdl.handle.net/21.15107/rcub_raf_1490"
}

Kontic, A., Jadresin Milic, R.,& Mrljes, R.. (2019). Defining the methodology of integrated research in the process of digital documentation of architectural heritage: case study Lizori, Italy. in Disegnarecon
University of L’Aquila., 12(23).
https://hdl.handle.net/21.15107/rcub_raf_1490

Kontic A, Jadresin Milic R, Mrljes R. Defining the methodology of integrated research in the process of digital documentation of architectural heritage: case study Lizori, Italy. in Disegnarecon. 2019;12(23).
https://hdl.handle.net/21.15107/rcub_raf_1490 .

Kontic, Ana, Jadresin Milic, Renata, Mrljes, Rade, "Defining the methodology of integrated research in the process of digital documentation of architectural heritage: case study Lizori, Italy" in Disegnarecon, 12, no. 23 (2019),
https://hdl.handle.net/21.15107/rcub_raf_1490 .

TY  - JOUR
AU  - Контић, Ана
AU  - Јадрешин Милић, Рената
AU  - Мрљеш, Раде
PY  - 2018
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1547
AB  - Циљ овог рада је дефинисање методологије интегрисаног истраживања у процесу дигиталне
документација градитељског наслеђа. Оквир истраживања овог рада стимулисан је учешћем аутора на стручној радионици у Лизорију, Италија, одржаној у јуну 2018. У раду је представљен резултат заснован на интеграцији традиционалних
и савремених метода снимања објеката архитектонског наслеђа. Програм међународне летње школе подржан је од стране италијанског министарства културе и туризма, Универзитета у Перуђи, Политехнике у Милану, фондације Антонио Менегети за научна и хуманистистичка истраживања. Кључно питање истраживано кроз програм односи се на могућности интеграције различитих метода истраживања наслеђа и њихову позицију у процесу дигиталне документације.
PB  - Београд : Друштво конзерватора Србије
T2  - Гласник Друштва конзерватора Србије
T1  - Међународна летња школа о културном пејзажу и очувању наслеђа, Лизори, Италија
IS  - 42
SP  - 227
EP  - 231
UR  - https://hdl.handle.net/21.15107/rcub_raf_1547
ER  - 

@article{
author = "Контић, Ана and Јадрешин Милић, Рената and Мрљеш, Раде",
year = "2018",
abstract = "Циљ овог рада је дефинисање методологије интегрисаног истраживања у процесу дигиталне
документација градитељског наслеђа. Оквир истраживања овог рада стимулисан је учешћем аутора на стручној радионици у Лизорију, Италија, одржаној у јуну 2018. У раду је представљен резултат заснован на интеграцији традиционалних
и савремених метода снимања објеката архитектонског наслеђа. Програм међународне летње школе подржан је од стране италијанског министарства културе и туризма, Универзитета у Перуђи, Политехнике у Милану, фондације Антонио Менегети за научна и хуманистистичка истраживања. Кључно питање истраживано кроз програм односи се на могућности интеграције различитих метода истраживања наслеђа и њихову позицију у процесу дигиталне документације.",
publisher = "Београд : Друштво конзерватора Србије",
journal = "Гласник Друштва конзерватора Србије",
title = "Међународна летња школа о културном пејзажу и очувању наслеђа, Лизори, Италија",
number = "42",
pages = "227-231",
url = "https://hdl.handle.net/21.15107/rcub_raf_1547"
}

Контић, А., Јадрешин Милић, Р.,& Мрљеш, Р.. (2018). Међународна летња школа о културном пејзажу и очувању наслеђа, Лизори, Италија. in Гласник Друштва конзерватора Србије
Београд : Друштво конзерватора Србије.(42), 227-231.
https://hdl.handle.net/21.15107/rcub_raf_1547

Контић А, Јадрешин Милић Р, Мрљеш Р. Међународна летња школа о културном пејзажу и очувању наслеђа, Лизори, Италија. in Гласник Друштва конзерватора Србије. 2018;(42):227-231.
https://hdl.handle.net/21.15107/rcub_raf_1547 .

Контић, Ана, Јадрешин Милић, Рената, Мрљеш, Раде, "Међународна летња школа о културном пејзажу и очувању наслеђа, Лизори, Италија" in Гласник Друштва конзерватора Србије, no. 42 (2018):227-231,
https://hdl.handle.net/21.15107/rcub_raf_1547 .