TY  - JOUR
AU  - Petrović, Milica
AU  - Pavićević, Darko
AU  - Ilić, Isidora
AU  - Terzović, Jefto
AU  - Šekularac, Nenad
PY  - 2023
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1536
AB  - The subject of this paper is the elements of a timber lamella structure: the lamellae and their joints. The lamella structure is usually in a diamond pattern, so it relies on additional elements to achieve stability. The analysis of the elements precedes the design of a prototype of a timber lamella vault. The characteristic diamond pattern can be kept for the design of rigid or semi-rigid joints. The design of the joints is challenging, so this paper focused on the analysis and systematization of joints designed for timber lamella structures. The existing timber lamella joints were classified and analyzed based on five parameters: eccentricity, load capacity, the number of elements, easiness of assembly, and adaptability to the circular cylindrical surface, to systemize the existing joints and propose a new one. A design for a new joint was proposed based on the presented joints. The systematization and discussion gave a comparison of all joints, their advantages, and limitations. The conclusion was that the geometry of a circular cylinder and the type of elements for the prototype confirmed all the benefits of the historical lamella structures: uniformity of elements, easy assembly, and economical design.
PB  - Basel : MDPI
T2  - Buildings
T1  - Elements of a Timber Lamella Structure: Analysis and Systematization of Joints
VL  - 13
IS  - 4
SP  - 885
DO  - 10.3390/buildings13040885
ER  - 

@article{
author = "Petrović, Milica and Pavićević, Darko and Ilić, Isidora and Terzović, Jefto and Šekularac, Nenad",
year = "2023",
abstract = "The subject of this paper is the elements of a timber lamella structure: the lamellae and their joints. The lamella structure is usually in a diamond pattern, so it relies on additional elements to achieve stability. The analysis of the elements precedes the design of a prototype of a timber lamella vault. The characteristic diamond pattern can be kept for the design of rigid or semi-rigid joints. The design of the joints is challenging, so this paper focused on the analysis and systematization of joints designed for timber lamella structures. The existing timber lamella joints were classified and analyzed based on five parameters: eccentricity, load capacity, the number of elements, easiness of assembly, and adaptability to the circular cylindrical surface, to systemize the existing joints and propose a new one. A design for a new joint was proposed based on the presented joints. The systematization and discussion gave a comparison of all joints, their advantages, and limitations. The conclusion was that the geometry of a circular cylinder and the type of elements for the prototype confirmed all the benefits of the historical lamella structures: uniformity of elements, easy assembly, and economical design.",
publisher = "Basel : MDPI",
journal = "Buildings",
title = "Elements of a Timber Lamella Structure: Analysis and Systematization of Joints",
volume = "13",
number = "4",
pages = "885",
doi = "10.3390/buildings13040885"
}

Petrović, M., Pavićević, D., Ilić, I., Terzović, J.,& Šekularac, N.. (2023). Elements of a Timber Lamella Structure: Analysis and Systematization of Joints. in Buildings
Basel : MDPI., 13(4), 885.
https://doi.org/10.3390/buildings13040885

Petrović M, Pavićević D, Ilić I, Terzović J, Šekularac N. Elements of a Timber Lamella Structure: Analysis and Systematization of Joints. in Buildings. 2023;13(4):885.
doi:10.3390/buildings13040885 .

Petrović, Milica, Pavićević, Darko, Ilić, Isidora, Terzović, Jefto, Šekularac, Nenad, "Elements of a Timber Lamella Structure: Analysis and Systematization of Joints" in Buildings, 13, no. 4 (2023):885,
https://doi.org/10.3390/buildings13040885 . .

TY  - CONF
AU  - Petrović, Milica
AU  - Drobnjak, Boško
PY  - 2023
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1407
AB  - This paper presents the ideas of the neo-avant-garde architect and inventor Buckminster Fuller. Relying on observing the Universe and analysing microorganisms while using the available technology, Fuller experimented and designed new architectural structures. His ideas were based on the advantage of steel as a material which works best in tension, thus reducing its cross-section and the overall weight of a structure. A unique characteristic of Fuller’s opus is his utopian projects for flying structures and biospheres, with the idea of creating a new microclimate, which never fails to inspire architects and artists. Fuller’s utopian ideas should be reconsidered in the contemporary age, following innovations in materials and technologies. This paper questions the possibility of applying Fuller’s design methodology to contemporary structures, making them more lightweight, sustainable, and economical. The positioning of Buckminster Fuller’s utopian ideas in a contemporary frame also revises the effect on social changes created by this type of architecture. It is a fusion of visual art, inventive design model, mechanical activity, economy, and overall evolutionary strategy for a new society. Concluding remarks will open questions about the possibility of the realisation of utopian ideas for a better and sustainable world. Or is it all still a utopia?
PB  - University of Belgrade – Faculty of Architecture
C3  - Keeping up with technologies to imagine and build together sustainable. inclusive, and beautiful cities : book of abstracts / 8th International Academic Conference on Places and Technologies, Belgrade
T1  - From utopia to realisation: Fuller’s experimental model as a potential method in contemporary architecture
SP  - 69
UR  - https://hdl.handle.net/21.15107/rcub_raf_1407
ER  - 

@conference{
author = "Petrović, Milica and Drobnjak, Boško",
year = "2023",
abstract = "This paper presents the ideas of the neo-avant-garde architect and inventor Buckminster Fuller. Relying on observing the Universe and analysing microorganisms while using the available technology, Fuller experimented and designed new architectural structures. His ideas were based on the advantage of steel as a material which works best in tension, thus reducing its cross-section and the overall weight of a structure. A unique characteristic of Fuller’s opus is his utopian projects for flying structures and biospheres, with the idea of creating a new microclimate, which never fails to inspire architects and artists. Fuller’s utopian ideas should be reconsidered in the contemporary age, following innovations in materials and technologies. This paper questions the possibility of applying Fuller’s design methodology to contemporary structures, making them more lightweight, sustainable, and economical. The positioning of Buckminster Fuller’s utopian ideas in a contemporary frame also revises the effect on social changes created by this type of architecture. It is a fusion of visual art, inventive design model, mechanical activity, economy, and overall evolutionary strategy for a new society. Concluding remarks will open questions about the possibility of the realisation of utopian ideas for a better and sustainable world. Or is it all still a utopia?",
publisher = "University of Belgrade – Faculty of Architecture",
journal = "Keeping up with technologies to imagine and build together sustainable. inclusive, and beautiful cities : book of abstracts / 8th International Academic Conference on Places and Technologies, Belgrade",
title = "From utopia to realisation: Fuller’s experimental model as a potential method in contemporary architecture",
pages = "69",
url = "https://hdl.handle.net/21.15107/rcub_raf_1407"
}

Petrović, M.,& Drobnjak, B.. (2023). From utopia to realisation: Fuller’s experimental model as a potential method in contemporary architecture. in Keeping up with technologies to imagine and build together sustainable. inclusive, and beautiful cities : book of abstracts / 8th International Academic Conference on Places and Technologies, Belgrade
University of Belgrade – Faculty of Architecture., 69.
https://hdl.handle.net/21.15107/rcub_raf_1407

Petrović M, Drobnjak B. From utopia to realisation: Fuller’s experimental model as a potential method in contemporary architecture. in Keeping up with technologies to imagine and build together sustainable. inclusive, and beautiful cities : book of abstracts / 8th International Academic Conference on Places and Technologies, Belgrade. 2023;:69.
https://hdl.handle.net/21.15107/rcub_raf_1407 .

Petrović, Milica, Drobnjak, Boško, "From utopia to realisation: Fuller’s experimental model as a potential method in contemporary architecture" in Keeping up with technologies to imagine and build together sustainable. inclusive, and beautiful cities : book of abstracts / 8th International Academic Conference on Places and Technologies, Belgrade (2023):69,
https://hdl.handle.net/21.15107/rcub_raf_1407 .

TY  - JOUR
AU  - Petrović, Milica
AU  - Ilić, Isidora
AU  - Mijatović, Svetislav
AU  - Šekularac, Nenad
PY  - 2022
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1253
AB  - This paper presents timber lamella structures applied to the circular cylinder surface when
all lamellae axes intersect at the nodes. To achieve the uniformity of all elements in this structure,
the geometry of the structure must be carefully designed. The main methods for the research are
graphical and numerical methods for geometric design and a prototype construction for a specific
geometric pattern. The methods are discussed for their ease of replication, as well as the possibility of
reinterpretation on other surfaces, while the prototype design and construction give insight into the
process from design to execution. The combination of these methods allows for a thorough analysis of
the geometry for lamella structures. The analysis shows that geometrical design must begin from the
whole to the lamella, and that the number of element types in the structure depends on the disposition
of the elements and the angle of the pattern. The discussion shows the advantages and limitations of
the proposed methods, while the conclusions give the guidelines for the implementation of lamella
structures into new design projects.
PB  - Multidisciplinary Digital Publishing Institute (MDPI)
T2  - Buildings
T1  - The Geometry of Timber Lamella Vaults: Prototype Analysis
VL  - 12
IS  - 10
SP  - 1653
DO  - 10.3390/buildings12101653
ER  - 

@article{
author = "Petrović, Milica and Ilić, Isidora and Mijatović, Svetislav and Šekularac, Nenad",
year = "2022",
abstract = "This paper presents timber lamella structures applied to the circular cylinder surface when
all lamellae axes intersect at the nodes. To achieve the uniformity of all elements in this structure,
the geometry of the structure must be carefully designed. The main methods for the research are
graphical and numerical methods for geometric design and a prototype construction for a specific
geometric pattern. The methods are discussed for their ease of replication, as well as the possibility of
reinterpretation on other surfaces, while the prototype design and construction give insight into the
process from design to execution. The combination of these methods allows for a thorough analysis of
the geometry for lamella structures. The analysis shows that geometrical design must begin from the
whole to the lamella, and that the number of element types in the structure depends on the disposition
of the elements and the angle of the pattern. The discussion shows the advantages and limitations of
the proposed methods, while the conclusions give the guidelines for the implementation of lamella
structures into new design projects.",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
journal = "Buildings",
title = "The Geometry of Timber Lamella Vaults: Prototype Analysis",
volume = "12",
number = "10",
pages = "1653",
doi = "10.3390/buildings12101653"
}

Petrović, M., Ilić, I., Mijatović, S.,& Šekularac, N.. (2022). The Geometry of Timber Lamella Vaults: Prototype Analysis. in Buildings
Multidisciplinary Digital Publishing Institute (MDPI)., 12(10), 1653.
https://doi.org/10.3390/buildings12101653

Petrović M, Ilić I, Mijatović S, Šekularac N. The Geometry of Timber Lamella Vaults: Prototype Analysis. in Buildings. 2022;12(10):1653.
doi:10.3390/buildings12101653 .

Petrović, Milica, Ilić, Isidora, Mijatović, Svetislav, Šekularac, Nenad, "The Geometry of Timber Lamella Vaults: Prototype Analysis" in Buildings, 12, no. 10 (2022):1653,
https://doi.org/10.3390/buildings12101653 . .

TY  - CONF
AU  - Petrović, Milica
AU  - Ilić, Isidora D.
AU  - Džombić, Neda M.
AU  - Šekularac, Nenad D.
PY  - 2021
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1726
AB  - This paper presents a structural design methodology in order to find the best possible solution of protective structures for active archeological sites. Besides the typical demands for construction on these sites which arise from the typology and the level of protection of cultural heritage, active archeological sites require a structural solution with regard to time and direction of further excavation. The hypothesis is that modular spatial structures which are easily assembled or disassembled, and have the ability to be extended in one or more directions, are the most functional solution for these sites. This paper shows the analysis of several types of spatial structures based on the requirements of active archeological sites. It explores the possibilities of structural systems derived from multiplication of one primary element of structure, their material and joints between elements. The most adequate assembly of the entire structure is supposed to be found in the interdependency of the load and the dimension of the element’s cross- section, in a suitable geometric configuration. The focus of the analysis is on structures made of short-bearing elements which have the advantage of the efficiency of transport and assembling. One of the design criteria for this methodology is that the structural system itself looks simple and elegant in order to complement the archeological site. This is shown in the paper through the analysis of patterns in which these structures are assembled. The aim is to correlate the position of the elements in the structural system, the dimensions of cross-section, and the lengths of the straight beams which form the spatial structure in order to find a simple, functional and economical solution for protective structures at active archeological sites. The conclusion shows the advantages and disadvantages of the design methodology presented in the paper, as well as the discussion about the analyzed spatial structures. This type of methodology that systematizes various design criteria from different fields of research engages the problem of design of protective structures for archeological sites and opens up new questions for further research.
PB  - SAHC
C3  - 12th International Conference on Structural Analysis of Historical Constructions (SAHC)
T1  - Design of Protective Structures for Active Archeological Sites
DO  - 10.23967/sahc.2021.074
ER  - 

@conference{
author = "Petrović, Milica and Ilić, Isidora D. and Džombić, Neda M. and Šekularac, Nenad D.",
year = "2021",
abstract = "This paper presents a structural design methodology in order to find the best possible solution of protective structures for active archeological sites. Besides the typical demands for construction on these sites which arise from the typology and the level of protection of cultural heritage, active archeological sites require a structural solution with regard to time and direction of further excavation. The hypothesis is that modular spatial structures which are easily assembled or disassembled, and have the ability to be extended in one or more directions, are the most functional solution for these sites. This paper shows the analysis of several types of spatial structures based on the requirements of active archeological sites. It explores the possibilities of structural systems derived from multiplication of one primary element of structure, their material and joints between elements. The most adequate assembly of the entire structure is supposed to be found in the interdependency of the load and the dimension of the element’s cross- section, in a suitable geometric configuration. The focus of the analysis is on structures made of short-bearing elements which have the advantage of the efficiency of transport and assembling. One of the design criteria for this methodology is that the structural system itself looks simple and elegant in order to complement the archeological site. This is shown in the paper through the analysis of patterns in which these structures are assembled. The aim is to correlate the position of the elements in the structural system, the dimensions of cross-section, and the lengths of the straight beams which form the spatial structure in order to find a simple, functional and economical solution for protective structures at active archeological sites. The conclusion shows the advantages and disadvantages of the design methodology presented in the paper, as well as the discussion about the analyzed spatial structures. This type of methodology that systematizes various design criteria from different fields of research engages the problem of design of protective structures for archeological sites and opens up new questions for further research.",
publisher = "SAHC",
journal = "12th International Conference on Structural Analysis of Historical Constructions (SAHC)",
title = "Design of Protective Structures for Active Archeological Sites",
doi = "10.23967/sahc.2021.074"
}

Petrović, M., Ilić, I. D., Džombić, N. M.,& Šekularac, N. D.. (2021). Design of Protective Structures for Active Archeological Sites. in 12th International Conference on Structural Analysis of Historical Constructions (SAHC)
SAHC..
https://doi.org/10.23967/sahc.2021.074

Petrović M, Ilić ID, Džombić NM, Šekularac ND. Design of Protective Structures for Active Archeological Sites. in 12th International Conference on Structural Analysis of Historical Constructions (SAHC). 2021;.
doi:10.23967/sahc.2021.074 .

Petrović, Milica, Ilić, Isidora D., Džombić, Neda M., Šekularac, Nenad D., "Design of Protective Structures for Active Archeological Sites" in 12th International Conference on Structural Analysis of Historical Constructions (SAHC) (2021),
https://doi.org/10.23967/sahc.2021.074 . .

TY  - JOUR
AU  - Sokolović, Neda M.
AU  - Petrović, Milica
AU  - Kontić, Ana
AU  - Koprivica, Suzana
AU  - Šekularac, Nenad
PY  - 2021
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1209
AB  - The importance of masonry arch bridges as a traffic network element calls for a thorough
analysis focused on both structural stability and loading capacity of these historical structures, considering
the usage of these bridges in contemporary traffic conditions. This paper focuses on the analysis
of longitudinal cracks in a single span masonry arch bridge to evaluate its influence on structural
behaviour of the system. As longitudinal cracks do not necessarily present an inevitable collapse
mechanism, analysis of the causes is crucial for evaluating the serviceability and functionality of the
bridge investigated. The methodology is based on the following: literature review, observation of the
stone bridge in Ivanjica, geological testing of the site, geophysical testing of the bridge, laboratory
testing of mechanical characteristics of stone used for the bridge construction and biological analysis
of the samples of implemented materials on the bridge. Finite element analysis of the bridge was
conducted to define the causes of the longitudinal cracks. The 3D simulation model was based on
the data collected through observation and experimental analysis. This paper provides extensive
research on a single span masonry bridge, examining how different deterioration mechanisms, in
conjunction, can lead to the appearance of cracks in masonry arch bridges and provide remedial
measures accordingly.
PB  - MDPI
T2  - Sustainability
T1  - Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study
VL  - 13
IS  - 23
SP  - 13363
DO  - 10.3390/su132313363
ER  - 

@article{
author = "Sokolović, Neda M. and Petrović, Milica and Kontić, Ana and Koprivica, Suzana and Šekularac, Nenad",
year = "2021",
abstract = "The importance of masonry arch bridges as a traffic network element calls for a thorough
analysis focused on both structural stability and loading capacity of these historical structures, considering
the usage of these bridges in contemporary traffic conditions. This paper focuses on the analysis
of longitudinal cracks in a single span masonry arch bridge to evaluate its influence on structural
behaviour of the system. As longitudinal cracks do not necessarily present an inevitable collapse
mechanism, analysis of the causes is crucial for evaluating the serviceability and functionality of the
bridge investigated. The methodology is based on the following: literature review, observation of the
stone bridge in Ivanjica, geological testing of the site, geophysical testing of the bridge, laboratory
testing of mechanical characteristics of stone used for the bridge construction and biological analysis
of the samples of implemented materials on the bridge. Finite element analysis of the bridge was
conducted to define the causes of the longitudinal cracks. The 3D simulation model was based on
the data collected through observation and experimental analysis. This paper provides extensive
research on a single span masonry bridge, examining how different deterioration mechanisms, in
conjunction, can lead to the appearance of cracks in masonry arch bridges and provide remedial
measures accordingly.",
publisher = "MDPI",
journal = "Sustainability",
title = "Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study",
volume = "13",
number = "23",
pages = "13363",
doi = "10.3390/su132313363"
}

Sokolović, N. M., Petrović, M., Kontić, A., Koprivica, S.,& Šekularac, N.. (2021). Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study. in Sustainability
MDPI., 13(23), 13363.
https://doi.org/10.3390/su132313363

Sokolović NM, Petrović M, Kontić A, Koprivica S, Šekularac N. Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study. in Sustainability. 2021;13(23):13363.
doi:10.3390/su132313363 .

Sokolović, Neda M., Petrović, Milica, Kontić, Ana, Koprivica, Suzana, Šekularac, Nenad, "Inspection and Assessment of Masonry Arch Bridges: Ivanjica Case Study" in Sustainability, 13, no. 23 (2021):13363,
https://doi.org/10.3390/su132313363 . .

TY  - BOOK
AU  - Obradović, Radojko
AU  - Petrović, Milica
AU  - Kontić, Ana
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1550
AB  - У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.
PB  - Универзитет у Београду- Архитектонски факултет
T1  - Принципи конструисања архитектонских објеката : практикум
UR  - https://hdl.handle.net/21.15107/rcub_raf_1550
ER  - 

@book{
author = "Obradović, Radojko and Petrović, Milica and Kontić, Ana",
year = "2019",
abstract = "У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.",
publisher = "Универзитет у Београду- Архитектонски факултет",
title = "Принципи конструисања архитектонских објеката : практикум",
url = "https://hdl.handle.net/21.15107/rcub_raf_1550"
}

Obradović, R., Petrović, M.,& Kontić, A.. (2019). Принципи конструисања архитектонских објеката : практикум. 
Универзитет у Београду- Архитектонски факултет..
https://hdl.handle.net/21.15107/rcub_raf_1550

Obradović R, Petrović M, Kontić A. Принципи конструисања архитектонских објеката : практикум. 2019;.
https://hdl.handle.net/21.15107/rcub_raf_1550 .

Obradović, Radojko, Petrović, Milica, Kontić, Ana, "Принципи конструисања архитектонских објеката : практикум" (2019),
https://hdl.handle.net/21.15107/rcub_raf_1550 .

TY  - CONF
AU  - Petrović, Milica
AU  - Stojanović, Djordje
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/768
AB  - Complex modeling presents new and contemporary subject in architecture. The loop between
the idea, programming, digital modeling and physical models gives the possibility to come to new
conclusions that help develop architectural projects. This paper aims to show the advantages of
multidisciplinary architectural projects through a workshop held at the University of Belgrade
- Faculty of Architecture. The participants of this workshop, from different backgrounds and
faculties, have been doing a research about the use of mechatronics in architecture. The
mechatronic system was analyzed on a physical model based on the project by the architectural
studio 4of7 Architecture for Slavija square in Belgrade. One of the aims of this workshop was to
show the user-object-environment relationship and to explore the advantages and disadvantages
of this kind of architectural design. The final product of this workshop is an interactive physical
model that can show the movement of architectural elements in real-time. This model can help
in the education about the use of mechatronics as a new design method in architecture. The
concluding argument would show the possibilities of mechatronics in architectural projects for
urban space and it will aim to place it on the map of design methodologies in architecture.
PB  - Pécs : University of Pécs Faculty of Engineering and Information Technology
C3  - Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019
T1  - Mechatronics in architecture: design research methodology
SP  - 507
EP  - 515
UR  - https://hdl.handle.net/21.15107/rcub_raf_768
ER  - 

@conference{
author = "Petrović, Milica and Stojanović, Djordje",
year = "2019",
abstract = "Complex modeling presents new and contemporary subject in architecture. The loop between
the idea, programming, digital modeling and physical models gives the possibility to come to new
conclusions that help develop architectural projects. This paper aims to show the advantages of
multidisciplinary architectural projects through a workshop held at the University of Belgrade
- Faculty of Architecture. The participants of this workshop, from different backgrounds and
faculties, have been doing a research about the use of mechatronics in architecture. The
mechatronic system was analyzed on a physical model based on the project by the architectural
studio 4of7 Architecture for Slavija square in Belgrade. One of the aims of this workshop was to
show the user-object-environment relationship and to explore the advantages and disadvantages
of this kind of architectural design. The final product of this workshop is an interactive physical
model that can show the movement of architectural elements in real-time. This model can help
in the education about the use of mechatronics as a new design method in architecture. The
concluding argument would show the possibilities of mechatronics in architectural projects for
urban space and it will aim to place it on the map of design methodologies in architecture.",
publisher = "Pécs : University of Pécs Faculty of Engineering and Information Technology",
journal = "Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019",
title = "Mechatronics in architecture: design research methodology",
pages = "507-515",
url = "https://hdl.handle.net/21.15107/rcub_raf_768"
}

Petrović, M.,& Stojanović, D.. (2019). Mechatronics in architecture: design research methodology. in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019
Pécs : University of Pécs Faculty of Engineering and Information Technology., 507-515.
https://hdl.handle.net/21.15107/rcub_raf_768

Petrović M, Stojanović D. Mechatronics in architecture: design research methodology. in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019. 2019;:507-515.
https://hdl.handle.net/21.15107/rcub_raf_768 .

Petrović, Milica, Stojanović, Djordje, "Mechatronics in architecture: design research methodology" in Places and technologies 2019 : keeping up with technologies to turn built heritage into the places of future generations : conference proceeding : 6th international academic conference, Pécs, Hungary, 9-10 May 2019 (2019):507-515,
https://hdl.handle.net/21.15107/rcub_raf_768 .

TY  - JOUR
AU  - Petrović, Milica
AU  - Skansi, L.
PY  - 2018
UR  - https://raf.arh.bg.ac.rs/handle/123456789/282
AB  - Architecture represents the synthesis of form, function and construction. In the works of the architect Ivan Antić this can be read at the first view of the building. A master in designing movement through an object, Antić constantly developed the relationship between function and form, as well as between function and construction. A detailed analysis of his work, projects and drawings, gives insight to these relations, making them clear. The observer can see the architect's logic and simplicity in designing even the most complex buildings. The relationship between the design concept and the way the structure manifests itself in his projects will be presented in this paper. The logic behind the design of Pinki Cultural Sports Center, with emphasis on structure, as well as the relationship between the architect and the engineer can be seen throughout this paper.
PB  - Institut za arhitekturu i urbanizam Srbije, Beograd
T2  - Spatium
T1  - An architect's relation to structure: Analysis of Pinki cultural sports center by Ivan Antić
IS  - 40
SP  - 1
EP  - 1
DO  - 10.2298/spat1840033p
ER  - 

@article{
author = "Petrović, Milica and Skansi, L.",
year = "2018",
abstract = "Architecture represents the synthesis of form, function and construction. In the works of the architect Ivan Antić this can be read at the first view of the building. A master in designing movement through an object, Antić constantly developed the relationship between function and form, as well as between function and construction. A detailed analysis of his work, projects and drawings, gives insight to these relations, making them clear. The observer can see the architect's logic and simplicity in designing even the most complex buildings. The relationship between the design concept and the way the structure manifests itself in his projects will be presented in this paper. The logic behind the design of Pinki Cultural Sports Center, with emphasis on structure, as well as the relationship between the architect and the engineer can be seen throughout this paper.",
publisher = "Institut za arhitekturu i urbanizam Srbije, Beograd",
journal = "Spatium",
title = "An architect's relation to structure: Analysis of Pinki cultural sports center by Ivan Antić",
number = "40",
pages = "1-1",
doi = "10.2298/spat1840033p"
}

Petrović, M.,& Skansi, L.. (2018). An architect's relation to structure: Analysis of Pinki cultural sports center by Ivan Antić. in Spatium
Institut za arhitekturu i urbanizam Srbije, Beograd.(40), 1-1.
https://doi.org/10.2298/spat1840033p

Petrović M, Skansi L. An architect's relation to structure: Analysis of Pinki cultural sports center by Ivan Antić. in Spatium. 2018;(40):1-1.
doi:10.2298/spat1840033p .

Petrović, Milica, Skansi, L., "An architect's relation to structure: Analysis of Pinki cultural sports center by Ivan Antić" in Spatium, no. 40 (2018):1-1,
https://doi.org/10.2298/spat1840033p . .