Bešević, Miroslav

Link to this page

Authority KeyName Variants
9dd431ba-2be5-4490-9d0f-ca10d7fa17f0
  • Bešević, Miroslav (2)
Projects
No records found.

Author's Bibliography

Dynamic characteristics of CLT panels: Computer modelling and simulations

Kozarić, Ljiljana; Vojnić Purčar, Martina; Tekić, Žikica; Bešević, Miroslav; Živković, Smilja

(IOP Publishing Ltd., 2020)

TY  - CONF
AU  - Kozarić, Ljiljana
AU  - Vojnić Purčar, Martina
AU  - Tekić, Žikica
AU  - Bešević, Miroslav
AU  - Živković, Smilja
PY  - 2020
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1363
AB  - The fundamental vibration frequency and deflections due to the unit static force of
the cross-laminated timber panels of different heights and spans were calculated. The
calculation of the effective flexural rigidity was performed by the Gamma method. Obtained
values are compared with the values obtained by modeling the construction in the Ansys
software package. Three types of floor panels were analyzed with the same combinations of
layer thicknesses in the cross section, but with different number of layers. The panels are 4, 5
and 6 meters long and 1 meter wide. Based on the results, recommendations have been made in
accordance with current criteria that define the acceptable behavior of lightweight floor
structures in relation to vibrations caused by human action.
PB  - IOP Publishing Ltd.
C3  - IOP Conference Series: Materials Science and Engineering, Volume 789, International Conference CIBv2019 Civil Engineering and Building Services 1-2 November 2019, Brașov, Romania
T1  - Dynamic characteristics of CLT panels: Computer modelling and simulations
VL  - 789
DO  - 10.1088/1757-899X/789/1/012031
ER  - 
@conference{
author = "Kozarić, Ljiljana and Vojnić Purčar, Martina and Tekić, Žikica and Bešević, Miroslav and Živković, Smilja",
year = "2020",
abstract = "The fundamental vibration frequency and deflections due to the unit static force of
the cross-laminated timber panels of different heights and spans were calculated. The
calculation of the effective flexural rigidity was performed by the Gamma method. Obtained
values are compared with the values obtained by modeling the construction in the Ansys
software package. Three types of floor panels were analyzed with the same combinations of
layer thicknesses in the cross section, but with different number of layers. The panels are 4, 5
and 6 meters long and 1 meter wide. Based on the results, recommendations have been made in
accordance with current criteria that define the acceptable behavior of lightweight floor
structures in relation to vibrations caused by human action.",
publisher = "IOP Publishing Ltd.",
journal = "IOP Conference Series: Materials Science and Engineering, Volume 789, International Conference CIBv2019 Civil Engineering and Building Services 1-2 November 2019, Brașov, Romania",
title = "Dynamic characteristics of CLT panels: Computer modelling and simulations",
volume = "789",
doi = "10.1088/1757-899X/789/1/012031"
}
Kozarić, L., Vojnić Purčar, M., Tekić, Ž., Bešević, M.,& Živković, S.. (2020). Dynamic characteristics of CLT panels: Computer modelling and simulations. in IOP Conference Series: Materials Science and Engineering, Volume 789, International Conference CIBv2019 Civil Engineering and Building Services 1-2 November 2019, Brașov, Romania
IOP Publishing Ltd.., 789.
https://doi.org/10.1088/1757-899X/789/1/012031
Kozarić L, Vojnić Purčar M, Tekić Ž, Bešević M, Živković S. Dynamic characteristics of CLT panels: Computer modelling and simulations. in IOP Conference Series: Materials Science and Engineering, Volume 789, International Conference CIBv2019 Civil Engineering and Building Services 1-2 November 2019, Brașov, Romania. 2020;789.
doi:10.1088/1757-899X/789/1/012031 .
Kozarić, Ljiljana, Vojnić Purčar, Martina, Tekić, Žikica, Bešević, Miroslav, Živković, Smilja, "Dynamic characteristics of CLT panels: Computer modelling and simulations" in IOP Conference Series: Materials Science and Engineering, Volume 789, International Conference CIBv2019 Civil Engineering and Building Services 1-2 November 2019, Brașov, Romania, 789 (2020),
https://doi.org/10.1088/1757-899X/789/1/012031 . .
1

Serviceability criteria for design of timber floors

Kozarić, Ljiljana; Tekić, Žikica; Bešević, Miroslav; Vojnić Purčar, Martina; Živković, Smilja

(Romania, Brasov: Transilvania University, Faculty of Civil Engineering, 2018)

TY  - JOUR
AU  - Kozarić, Ljiljana
AU  - Tekić, Žikica
AU  - Bešević, Miroslav
AU  - Vojnić Purčar, Martina
AU  - Živković, Smilja
PY  - 2018
UR  - https://raf.arh.bg.ac.rs/handle/123456789/797
AB  - This paper summarizes current regulations for comfort assessment of structural vibrations of timber floors in Europe and main design practices of timber floors on this aspect among the European countries. For building design, human activities are the most important internal sources of vibration in timber floors. The daily human activities such as walking, jumping or running on the floor may lead to an uncomfortable feeling to the users when magnitudes of the vibration are uncontrolled. Comparisons of vibration serviceability criteria for design of timber floors among the European countries were conducted and the recommendations on vibration serviceability design of timber floors are proposed.
PB  - Romania, Brasov: Transilvania University, Faculty of Civil Engineering
T2  - Bulletin of the Transilvania University of Brasov
T1  - Serviceability criteria for design of timber floors
VL  - 11
IS  - 60
SP  - 81
EP  - 86
UR  - https://hdl.handle.net/21.15107/rcub_raf_797
ER  - 
@article{
author = "Kozarić, Ljiljana and Tekić, Žikica and Bešević, Miroslav and Vojnić Purčar, Martina and Živković, Smilja",
year = "2018",
abstract = "This paper summarizes current regulations for comfort assessment of structural vibrations of timber floors in Europe and main design practices of timber floors on this aspect among the European countries. For building design, human activities are the most important internal sources of vibration in timber floors. The daily human activities such as walking, jumping or running on the floor may lead to an uncomfortable feeling to the users when magnitudes of the vibration are uncontrolled. Comparisons of vibration serviceability criteria for design of timber floors among the European countries were conducted and the recommendations on vibration serviceability design of timber floors are proposed.",
publisher = "Romania, Brasov: Transilvania University, Faculty of Civil Engineering",
journal = "Bulletin of the Transilvania University of Brasov",
title = "Serviceability criteria for design of timber floors",
volume = "11",
number = "60",
pages = "81-86",
url = "https://hdl.handle.net/21.15107/rcub_raf_797"
}
Kozarić, L., Tekić, Ž., Bešević, M., Vojnić Purčar, M.,& Živković, S.. (2018). Serviceability criteria for design of timber floors. in Bulletin of the Transilvania University of Brasov
Romania, Brasov: Transilvania University, Faculty of Civil Engineering., 11(60), 81-86.
https://hdl.handle.net/21.15107/rcub_raf_797
Kozarić L, Tekić Ž, Bešević M, Vojnić Purčar M, Živković S. Serviceability criteria for design of timber floors. in Bulletin of the Transilvania University of Brasov. 2018;11(60):81-86.
https://hdl.handle.net/21.15107/rcub_raf_797 .
Kozarić, Ljiljana, Tekić, Žikica, Bešević, Miroslav, Vojnić Purčar, Martina, Živković, Smilja, "Serviceability criteria for design of timber floors" in Bulletin of the Transilvania University of Brasov, 11, no. 60 (2018):81-86,
https://hdl.handle.net/21.15107/rcub_raf_797 .