Petrović, Ana

Link to this page

Authority KeyName Variants
78492d22-a873-427e-9139-7dd5dfbe6813
  • Petrović, Ana (2)
  • Petrović, Ana S. (1)
Projects

Author's Bibliography

Kreativno-inovativni multifunkcionalni centar „Ložionica‟ Mostarska petlja, Beograd [prva nagrada]

Karabašević Sudžum, Anđela; Sudžum, Vladislav; Petrović, Ana; Matijević, Marija; Milić, Zoja

(Udruženje arhitekata Srbije, 2021)


                                            

                                            
Karabašević Sudžum, A., Sudžum, V., Petrović, A., Matijević, M.,& Milić, Z.. (2021). Kreativno-inovativni multifunkcionalni centar „Ložionica‟ Mostarska petlja, Beograd [prva nagrada]. in Javni, otvoreni, anonimni, jednostepeni, arhitektonsko-urbanistički konkurs za idejno rešenje, Kreativno-inovativni multifunkcionalni centar „Ložionica”, Mostarska petlja, Beograd
Udruženje arhitekata Srbije..
https://hdl.handle.net/21.15107/rcub_raf_1748
Karabašević Sudžum A, Sudžum V, Petrović A, Matijević M, Milić Z. Kreativno-inovativni multifunkcionalni centar „Ložionica‟ Mostarska petlja, Beograd [prva nagrada]. in Javni, otvoreni, anonimni, jednostepeni, arhitektonsko-urbanistički konkurs za idejno rešenje, Kreativno-inovativni multifunkcionalni centar „Ložionica”, Mostarska petlja, Beograd. 2021;.
https://hdl.handle.net/21.15107/rcub_raf_1748 .
Karabašević Sudžum, Anđela, Sudžum, Vladislav, Petrović, Ana, Matijević, Marija, Milić, Zoja, "Kreativno-inovativni multifunkcionalni centar „Ložionica‟ Mostarska petlja, Beograd [prva nagrada]" in Javni, otvoreni, anonimni, jednostepeni, arhitektonsko-urbanistički konkurs za idejno rešenje, Kreativno-inovativni multifunkcionalni centar „Ložionica”, Mostarska petlja, Beograd (2021),
https://hdl.handle.net/21.15107/rcub_raf_1748 .

Stambeno-poslovni kompleks Slavija-Manjež [prva nagrada]

Karabašević Sudžum, Anđela; Sudžum, Vladislav; Petrović, Ana; Matijević, Marija; Bekić, Aleksa; Milić, Zoja

(Društvo arhitekata Beograda, 2021)


                                            

                                            
Karabašević Sudžum, A., Sudžum, V., Petrović, A., Matijević, M., Bekić, A.,& Milić, Z.. (2021). Stambeno-poslovni kompleks Slavija-Manjež [prva nagrada]. in Otvoreni, anketni, jednostepeni, međunarodni, anonimno, urbanističko- arhitektonski konkurs za deo bloka između ulica: Kralja Milana, Svetozara Markovića, Nemanjine i Kralja Milutina u Beogradu
Društvo arhitekata Beograda..
https://hdl.handle.net/21.15107/rcub_raf_1771
Karabašević Sudžum A, Sudžum V, Petrović A, Matijević M, Bekić A, Milić Z. Stambeno-poslovni kompleks Slavija-Manjež [prva nagrada]. in Otvoreni, anketni, jednostepeni, međunarodni, anonimno, urbanističko- arhitektonski konkurs za deo bloka između ulica: Kralja Milana, Svetozara Markovića, Nemanjine i Kralja Milutina u Beogradu. 2021;.
https://hdl.handle.net/21.15107/rcub_raf_1771 .
Karabašević Sudžum, Anđela, Sudžum, Vladislav, Petrović, Ana, Matijević, Marija, Bekić, Aleksa, Milić, Zoja, "Stambeno-poslovni kompleks Slavija-Manjež [prva nagrada]" in Otvoreni, anketni, jednostepeni, međunarodni, anonimno, urbanističko- arhitektonski konkurs za deo bloka između ulica: Kralja Milana, Svetozara Markovića, Nemanjine i Kralja Milutina u Beogradu (2021),
https://hdl.handle.net/21.15107/rcub_raf_1771 .

Influence of furnace tube shapeon thermal strain of fire-tube boilers

Gaćeša, Branka M.; Maneski, Taško Dj.; Milošević-Mitić, Vesna O.; Nestorović, Miodrag S.; Petrović, Ana S.

(VINCA Institute of Nuclear Sciences, 2014)

TY  - JOUR
AU  - Gaćeša, Branka M.
AU  - Maneski, Taško Dj.
AU  - Milošević-Mitić, Vesna O.
AU  - Nestorović, Miodrag S.
AU  - Petrović, Ana S.
PY  - 2014
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1105
AB  - The aim of this paper is to use numerical analysis and fine element method-FEM
to investigate the influence of furnace tube shape on the thermal strain of firetube boilers. Thermal stresses in corrugated furnace tubes of different shape, i.e.
with different corrugation pitch and depth, were analysed first. It was
demonstrated that the thermal stresses in corrugated furnace tube are
significantly reduced with the increase of corrugation depth. Than deformations
and stresses in the structure of a fire-tube boiler were analysed in a real
operating condition, for the cases of installed plain furnace tube and corrugated
furnace tubes with different shapes. It was concluded that in this fire-tube boiler,
which is of larger steam capacity, the corrugated furnace tube must be installed,
as well as that the maximal stress in the construction is reduced by the
installation of the furnace tube with greater corrugation depth. The analysis of
stresses due to pressure and thermal loads pointed out that thermal stresses are
not lower-order stresses in comparison to stresses due to pressure loads, so they
must be taken into consideration for boiler strength analysis.
PB  - VINCA Institute of Nuclear Sciences
T2  - Thermal Science
T1  - Influence of furnace tube shapeon thermal strain of fire-tube boilers
VL  - 18
IS  - suppl.1
SP  - 39
EP  - 47
DO  - 10.2298/TSCI130317172G
ER  - 
@article{
author = "Gaćeša, Branka M. and Maneski, Taško Dj. and Milošević-Mitić, Vesna O. and Nestorović, Miodrag S. and Petrović, Ana S.",
year = "2014",
abstract = "The aim of this paper is to use numerical analysis and fine element method-FEM
to investigate the influence of furnace tube shape on the thermal strain of firetube boilers. Thermal stresses in corrugated furnace tubes of different shape, i.e.
with different corrugation pitch and depth, were analysed first. It was
demonstrated that the thermal stresses in corrugated furnace tube are
significantly reduced with the increase of corrugation depth. Than deformations
and stresses in the structure of a fire-tube boiler were analysed in a real
operating condition, for the cases of installed plain furnace tube and corrugated
furnace tubes with different shapes. It was concluded that in this fire-tube boiler,
which is of larger steam capacity, the corrugated furnace tube must be installed,
as well as that the maximal stress in the construction is reduced by the
installation of the furnace tube with greater corrugation depth. The analysis of
stresses due to pressure and thermal loads pointed out that thermal stresses are
not lower-order stresses in comparison to stresses due to pressure loads, so they
must be taken into consideration for boiler strength analysis.",
publisher = "VINCA Institute of Nuclear Sciences",
journal = "Thermal Science",
title = "Influence of furnace tube shapeon thermal strain of fire-tube boilers",
volume = "18",
number = "suppl.1",
pages = "39-47",
doi = "10.2298/TSCI130317172G"
}
Gaćeša, B. M., Maneski, T. Dj., Milošević-Mitić, V. O., Nestorović, M. S.,& Petrović, A. S.. (2014). Influence of furnace tube shapeon thermal strain of fire-tube boilers. in Thermal Science
VINCA Institute of Nuclear Sciences., 18(suppl.1), 39-47.
https://doi.org/10.2298/TSCI130317172G
Gaćeša BM, Maneski TD, Milošević-Mitić VO, Nestorović MS, Petrović AS. Influence of furnace tube shapeon thermal strain of fire-tube boilers. in Thermal Science. 2014;18(suppl.1):39-47.
doi:10.2298/TSCI130317172G .
Gaćeša, Branka M., Maneski, Taško Dj., Milošević-Mitić, Vesna O., Nestorović, Miodrag S., Petrović, Ana S., "Influence of furnace tube shapeon thermal strain of fire-tube boilers" in Thermal Science, 18, no. suppl.1 (2014):39-47,
https://doi.org/10.2298/TSCI130317172G . .
5
3