TY  - CONF
AU  - Sudimac, Budimir
AU  - Slavković, Branko
AU  - Obradović, Radojko
PY  - 2023
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1753
AB  - Cilj ovog istraživanja je optimizacija fasadnog omotača, arhitektonskog objekta, integracijom vegetacionih modularnih elemenata. U radu se istražuju potencijali vegetacionih zidova u smanjenja utroška  energije potrebne za hlađenje objekta u letnjem periodu. Istraživanje je obuhvatilo analizu energetskih specifičnosti vegetacionih zidova i njihovu programsku integrakciju u urbanim gradskim ambijentima. Korišćenje elemenata vegetacionih zidova u arhitekturi otvorilo je nove projektantske mogućnosti i stvorilo izazove za projektante sa ciljem povećanja energetske efikasnosti objekata. U radu se vegetacioni zidovi tretiraju kao elementi zaštite arhitektonskih objekata od toplotnog pregrevanja. Analize su pokazale da vegetacija smanjuje kontaktnu temperaturu površina strukturalnih zidova objekta, dok isparavanje obezbeđuje pasivno hlađenje. Cilj istraživanja je da se ispitaju metode i tehnike, kojima se obezbeđuje široka primena vegetacionih zidova u arhitekturi postojećih i novih objekata kroz ispitivanja i pronalaženja preporuka za unapređenjem termičkih karakteristika fasadnih omotača objekta.
PB  - Banja Luka:Arhitektonsko-građevinsko-geodetski fakultet Univerziteta u Banjoj Luci
C3  - Zbornik radova / V Naučno-stručni simpozijum Energetska efikasnost ENEF, Banja Luka, 26 - 27. april
T1  - Утицај вегетационих модуларних елемената за зидове омотача на енергетски биланс зграде
SP  - 61
EP  - 66
UR  - https://hdl.handle.net/21.15107/rcub_raf_1753
ER  - 

@conference{
author = "Sudimac, Budimir and Slavković, Branko and Obradović, Radojko",
year = "2023",
abstract = "Cilj ovog istraživanja je optimizacija fasadnog omotača, arhitektonskog objekta, integracijom vegetacionih modularnih elemenata. U radu se istražuju potencijali vegetacionih zidova u smanjenja utroška  energije potrebne za hlađenje objekta u letnjem periodu. Istraživanje je obuhvatilo analizu energetskih specifičnosti vegetacionih zidova i njihovu programsku integrakciju u urbanim gradskim ambijentima. Korišćenje elemenata vegetacionih zidova u arhitekturi otvorilo je nove projektantske mogućnosti i stvorilo izazove za projektante sa ciljem povećanja energetske efikasnosti objekata. U radu se vegetacioni zidovi tretiraju kao elementi zaštite arhitektonskih objekata od toplotnog pregrevanja. Analize su pokazale da vegetacija smanjuje kontaktnu temperaturu površina strukturalnih zidova objekta, dok isparavanje obezbeđuje pasivno hlađenje. Cilj istraživanja je da se ispitaju metode i tehnike, kojima se obezbeđuje široka primena vegetacionih zidova u arhitekturi postojećih i novih objekata kroz ispitivanja i pronalaženja preporuka za unapređenjem termičkih karakteristika fasadnih omotača objekta.",
publisher = "Banja Luka:Arhitektonsko-građevinsko-geodetski fakultet Univerziteta u Banjoj Luci",
journal = "Zbornik radova / V Naučno-stručni simpozijum Energetska efikasnost ENEF, Banja Luka, 26 - 27. april",
title = "Утицај вегетационих модуларних елемената за зидове омотача на енергетски биланс зграде",
pages = "61-66",
url = "https://hdl.handle.net/21.15107/rcub_raf_1753"
}

Sudimac, B., Slavković, B.,& Obradović, R.. (2023). Утицај вегетационих модуларних елемената за зидове омотача на енергетски биланс зграде. in Zbornik radova / V Naučno-stručni simpozijum Energetska efikasnost ENEF, Banja Luka, 26 - 27. april
Banja Luka:Arhitektonsko-građevinsko-geodetski fakultet Univerziteta u Banjoj Luci., 61-66.
https://hdl.handle.net/21.15107/rcub_raf_1753

Sudimac B, Slavković B, Obradović R. Утицај вегетационих модуларних елемената за зидове омотача на енергетски биланс зграде. in Zbornik radova / V Naučno-stručni simpozijum Energetska efikasnost ENEF, Banja Luka, 26 - 27. april. 2023;:61-66.
https://hdl.handle.net/21.15107/rcub_raf_1753 .

Sudimac, Budimir, Slavković, Branko, Obradović, Radojko, "Утицај вегетационих модуларних елемената за зидове омотача на енергетски биланс зграде" in Zbornik radova / V Naučno-stručni simpozijum Energetska efikasnost ENEF, Banja Luka, 26 - 27. april (2023):61-66,
https://hdl.handle.net/21.15107/rcub_raf_1753 .

TY  - JOUR
AU  - Žujović, Maša
AU  - Obradović, Radojko
AU  - Rakonjac, Ivana
AU  - Milošević, Jelena
PY  - 2022
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1353
AB  - The proliferation of digital technologies considerably changed the field of architecture. Digital fabrication pushes architecture into an unexpected new domain of previously unachievable complexity, detail, and materiality. Understanding these technologies’ impact can help direct future research, innovate design and construction processes, and improve the education of future professionals. However, comprehensive reviews offering a holistic perspective on the effects of 3D printing technologies on architecture are limited. Therefore, this study aims to provide a systematic review of state-of-the-art research on 3D printing technologies in architectural design and construction. The review was performed using three major databases, and selected peer-reviewed journal articles published in the last ten-year period were included in quantitative and qualitative analyses. Using bibliometric analysis, the research progress is summarized through the identified trend of the annual number of articles, prominent authors and co-authorship network, and key topics in the literature organized in three clusters. Further, content analysis of selected articles enabled coding cluster themes. Moreover, the analysis differentiated two categories of 3D printing technologies based on the scale of the system, elaborating their peculiarities in terms of materials, methods, and applications. Finally, challenges and promising directions for future work and research challenges are discussed.
PB  - MDPI
T2  - Buildings
T1  - 3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review
VL  - 12
IS  - 9
SP  - 1319
DO  - 10.3390/buildings12091319
ER  - 

@article{
author = "Žujović, Maša and Obradović, Radojko and Rakonjac, Ivana and Milošević, Jelena",
year = "2022",
abstract = "The proliferation of digital technologies considerably changed the field of architecture. Digital fabrication pushes architecture into an unexpected new domain of previously unachievable complexity, detail, and materiality. Understanding these technologies’ impact can help direct future research, innovate design and construction processes, and improve the education of future professionals. However, comprehensive reviews offering a holistic perspective on the effects of 3D printing technologies on architecture are limited. Therefore, this study aims to provide a systematic review of state-of-the-art research on 3D printing technologies in architectural design and construction. The review was performed using three major databases, and selected peer-reviewed journal articles published in the last ten-year period were included in quantitative and qualitative analyses. Using bibliometric analysis, the research progress is summarized through the identified trend of the annual number of articles, prominent authors and co-authorship network, and key topics in the literature organized in three clusters. Further, content analysis of selected articles enabled coding cluster themes. Moreover, the analysis differentiated two categories of 3D printing technologies based on the scale of the system, elaborating their peculiarities in terms of materials, methods, and applications. Finally, challenges and promising directions for future work and research challenges are discussed.",
publisher = "MDPI",
journal = "Buildings",
title = "3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review",
volume = "12",
number = "9",
pages = "1319",
doi = "10.3390/buildings12091319"
}

Žujović, M., Obradović, R., Rakonjac, I.,& Milošević, J.. (2022). 3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review. in Buildings
MDPI., 12(9), 1319.
https://doi.org/10.3390/buildings12091319

Žujović M, Obradović R, Rakonjac I, Milošević J. 3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review. in Buildings. 2022;12(9):1319.
doi:10.3390/buildings12091319 .

Žujović, Maša, Obradović, Radojko, Rakonjac, Ivana, Milošević, Jelena, "3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review" in Buildings, 12, no. 9 (2022):1319,
https://doi.org/10.3390/buildings12091319 . .

TY  - JOUR
AU  - Obradović, Radojko
AU  - Pamučar, Dragan
PY  - 2020
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1063
AB  - The process of construction and exploitation of a building passes through the preparation phase, the construction phase and the exploitation phase. Each of these phases involves the selection of criteria and decision making, with the aim of selecting the optimal construction materials for the building. The paper presents a new model for selecting construction materials that is based on fuzzy logic. In order to simulate the expert process of assessing the construction and exploitation of a building during which construction materials are selected, a modular fuzzy logic system was designed with a unique base of knowledge to assist in decision making on the priorities of the construction material. The model consists of four modules that are hierarchically organized on two levels. The size of the output from the model is the measure of a material’s priority. Each of the materials observed (straw, wood, brick and concrete-steel) is assigned a certain value for the criterion function, on the basis of which the user of the system chooses the material for construction. In addition to the structure of the model, the paper presents its testing. Testing was carried out on the case study of selecting materials for the construction of five residential buildings.
PB  - Slavonski Brod : Faculty of Mechanical Engineering in Slavonski Brod
PB  - Osijek : Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
PB  - Osijek : Faculty of Civil Engineering in Osijek
T2  - Tehnicki vjesnik - Technical gazette
T1  - Multi-Criteria Model for the Selection of Construction Materials: An Approach Based on Fuzzy Logic
VL  - 27
IS  - 5
SP  - 1531
EP  - 1543
DO  - 10.17559/TV-20190426123437
ER  - 

@article{
author = "Obradović, Radojko and Pamučar, Dragan",
year = "2020",
abstract = "The process of construction and exploitation of a building passes through the preparation phase, the construction phase and the exploitation phase. Each of these phases involves the selection of criteria and decision making, with the aim of selecting the optimal construction materials for the building. The paper presents a new model for selecting construction materials that is based on fuzzy logic. In order to simulate the expert process of assessing the construction and exploitation of a building during which construction materials are selected, a modular fuzzy logic system was designed with a unique base of knowledge to assist in decision making on the priorities of the construction material. The model consists of four modules that are hierarchically organized on two levels. The size of the output from the model is the measure of a material’s priority. Each of the materials observed (straw, wood, brick and concrete-steel) is assigned a certain value for the criterion function, on the basis of which the user of the system chooses the material for construction. In addition to the structure of the model, the paper presents its testing. Testing was carried out on the case study of selecting materials for the construction of five residential buildings.",
publisher = "Slavonski Brod : Faculty of Mechanical Engineering in Slavonski Brod, Osijek : Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek : Faculty of Civil Engineering in Osijek",
journal = "Tehnicki vjesnik - Technical gazette",
title = "Multi-Criteria Model for the Selection of Construction Materials: An Approach Based on Fuzzy Logic",
volume = "27",
number = "5",
pages = "1531-1543",
doi = "10.17559/TV-20190426123437"
}

Obradović, R.,& Pamučar, D.. (2020). Multi-Criteria Model for the Selection of Construction Materials: An Approach Based on Fuzzy Logic. in Tehnicki vjesnik - Technical gazette
Slavonski Brod : Faculty of Mechanical Engineering in Slavonski Brod., 27(5), 1531-1543.
https://doi.org/10.17559/TV-20190426123437

Obradović R, Pamučar D. Multi-Criteria Model for the Selection of Construction Materials: An Approach Based on Fuzzy Logic. in Tehnicki vjesnik - Technical gazette. 2020;27(5):1531-1543.
doi:10.17559/TV-20190426123437 .

Obradović, Radojko, Pamučar, Dragan, "Multi-Criteria Model for the Selection of Construction Materials: An Approach Based on Fuzzy Logic" in Tehnicki vjesnik - Technical gazette, 27, no. 5 (2020):1531-1543,
https://doi.org/10.17559/TV-20190426123437 . .

TY  - CONF
AU  - Sudimac, Budimir
AU  - Ugrinović, Aleksandra
AU  - Obradović, Radojko
PY  - 2020
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1774
AB  - The use of green walls (also commonly referred to as living walls or vertical gardens) is not a new concept in building envelopes. Integrating vegetation in architectural structures may be a sustainable approach to the construction of façades of the new and existing structures. Green walls belong to the highly innovative and the fastest developing concepts of green building technology. This fact is supported by the examples of structures originally built with green walls which greatly add to the total visual appeal of buildings and are an important factor in the improvement of their thermal characteris- tics. Green walls have their own aesthetic values which are in direct correlation with human interaction aimed at creating visual diversity within urban spaces. Artistic perception of green walls of the recent era has radically changed, along with the new technological possibilities, their further development and application in the designing effort to formulate shape and materialization as a spatial structure with the already known aspects of traditional modelling. Green walls appear in space as elements car- rying artistic application and sculptural creation in spatial architectural form of structures. Greening and preserving urban spaces have become important issues in considering conditions for designing architectural structures and redefining the relation between technology, energy and shaping, with the possibility of applying green walls in the architectural transformation process of the urban space. Green walls have raised new aesthetic issues, which are in direct correlation with technical solutions.
PB  - Belgrade : University of Belgrade, Faculty of Architecture
C3  - Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies
T1  - Sustainable urban development by means of green walls
SP  - 223
EP  - 231
DO  - 10.18485/arh_pt.2020.7
ER  - 

@conference{
author = "Sudimac, Budimir and Ugrinović, Aleksandra and Obradović, Radojko",
year = "2020",
abstract = "The use of green walls (also commonly referred to as living walls or vertical gardens) is not a new concept in building envelopes. Integrating vegetation in architectural structures may be a sustainable approach to the construction of façades of the new and existing structures. Green walls belong to the highly innovative and the fastest developing concepts of green building technology. This fact is supported by the examples of structures originally built with green walls which greatly add to the total visual appeal of buildings and are an important factor in the improvement of their thermal characteris- tics. Green walls have their own aesthetic values which are in direct correlation with human interaction aimed at creating visual diversity within urban spaces. Artistic perception of green walls of the recent era has radically changed, along with the new technological possibilities, their further development and application in the designing effort to formulate shape and materialization as a spatial structure with the already known aspects of traditional modelling. Green walls appear in space as elements car- rying artistic application and sculptural creation in spatial architectural form of structures. Greening and preserving urban spaces have become important issues in considering conditions for designing architectural structures and redefining the relation between technology, energy and shaping, with the possibility of applying green walls in the architectural transformation process of the urban space. Green walls have raised new aesthetic issues, which are in direct correlation with technical solutions.",
publisher = "Belgrade : University of Belgrade, Faculty of Architecture",
journal = "Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies",
title = "Sustainable urban development by means of green walls",
pages = "223-231",
doi = "10.18485/arh_pt.2020.7"
}

Sudimac, B., Ugrinović, A.,& Obradović, R.. (2020). Sustainable urban development by means of green walls. in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies
Belgrade : University of Belgrade, Faculty of Architecture., 223-231.
https://doi.org/10.18485/arh_pt.2020.7

Sudimac B, Ugrinović A, Obradović R. Sustainable urban development by means of green walls. in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies. 2020;:223-231.
doi:10.18485/arh_pt.2020.7 .

Sudimac, Budimir, Ugrinović, Aleksandra, Obradović, Radojko, "Sustainable urban development by means of green walls" in Keeping up with technologies to act responsively in urban environment [Elektronski izvor] : conference proceedings / 7th international Academic Conference on Places and Technologies (2020):223-231,
https://doi.org/10.18485/arh_pt.2020.7 . .

TY  - CONF
AU  - Контић, Ана Д.
AU  - Обрадовић, Радојко
AU  - Петровић, Милица
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1668
AB  - Рад је усмерен на анализу конструктивног склопа заштитног објекта археолошког наслеђа, као израза инжењерског обликовања и архитектонске ликовности. У првом делу рада анализиране су актуелне одредбе у области заштите археолошког наслеђа, којима се дефинишу критеријуми за вредновање инжењерског обликовања примењеног конструктивног склопа. У другом делу рада, исти конструктивни склоп је посматран израз архитектонске ликовности, кроз анализу тектонике простора. Циљ истраживања је да се кроз анализу примера из праксе укаже на специфичност пројектовања и читања заштитних објеката археолошких налазишта, који може унапредити однос са археолошким наслеђем у будућем раду на реконструкцији.
PB  - Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts
C3  - Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied
T1  - Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности
SP  - 31
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_raf_1668
ER  - 

@conference{
author = "Контић, Ана Д. and Обрадовић, Радојко and Петровић, Милица",
year = "2019",
abstract = "Рад је усмерен на анализу конструктивног склопа заштитног објекта археолошког наслеђа, као израза инжењерског обликовања и архитектонске ликовности. У првом делу рада анализиране су актуелне одредбе у области заштите археолошког наслеђа, којима се дефинишу критеријуми за вредновање инжењерског обликовања примењеног конструктивног склопа. У другом делу рада, исти конструктивни склоп је посматран израз архитектонске ликовности, кроз анализу тектонике простора. Циљ истраживања је да се кроз анализу примера из праксе укаже на специфичност пројектовања и читања заштитних објеката археолошких налазишта, који може унапредити однос са археолошким наслеђем у будућем раду на реконструкцији.",
publisher = "Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts",
journal = "Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied",
title = "Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности",
pages = "31-32",
url = "https://hdl.handle.net/21.15107/rcub_raf_1668"
}

Контић, А. Д., Обрадовић, Р.,& Петровић, М.. (2019). Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности. in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied
Београд : Универзитет уметности, Факултет примењених уметности  = Belgrade : University of Arts, Faculty of Applied Arts., 31-32.
https://hdl.handle.net/21.15107/rcub_raf_1668

Контић АД, Обрадовић Р, Петровић М. Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности. in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied. 2019;:31-32.
https://hdl.handle.net/21.15107/rcub_raf_1668 .

Контић, Ана Д., Обрадовић, Радојко, Петровић, Милица, "Заштитни објекти археолошког наслеђа: Између инжењерског обликовања и архитектонске ликовности" in Од инспирације до интеракције : књига апстраката / Прва међународна конференција SmartArt - Уметност и наука у примени =  From inspiration to interaction : book of abstracts / First International conference SmartArt - Art and Science Applied (2019):31-32,
https://hdl.handle.net/21.15107/rcub_raf_1668 .

TY  - BOOK
AU  - Obradović, Radojko
AU  - Petrović, Milica
AU  - Kontić, Ana
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1550
AB  - У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.
PB  - Универзитет у Београду- Архитектонски факултет
T1  - Принципи конструисања архитектонских објеката : практикум
UR  - https://hdl.handle.net/21.15107/rcub_raf_1550
ER  - 

@book{
author = "Obradović, Radojko and Petrović, Milica and Kontić, Ana",
year = "2019",
abstract = "У овом практикуму приказана је материја која се излаже студентима основних студија на предавањима и вежбама у оквиру предмета Принципи конструисања архитектонских објеката, на Универзитету у Београду - Архитектонски факултет.
Студенти архитектуре, будуће архитекте, на основним студијама, кроз више предмета упознају се са елементима Теорије конструкција и стичу знања из анализе, прорачуна и димензионисања конструкција. Предмет Принципи конструисања архитектонских објеката упознаје их са основним теоријским поставкама, типовима носача и методама прорачуна реакција ослонаца и пресечних сила.
Практикум је припремљен као помоћ у праћењу наставе и лакшем савладавању градива на вежбама на овом предмету.
Посебан изазов у изради практикума, као и током вежбања, представља сажимање обимне и комплексне материје Теорије конструкција. Потребно је изабрати ограничен број тема, које се могу обрадити, примерено претходно стеченим знањима и фонду часова на предмету, а које ће омогућити студентима да науче суштину теорије и да добију знања која имају практичну примену. Практикум је један у низу елемента који треба да помогну у том процесу.
У практикуму је у поглављима:
1. Проста греда;
2. Греда са препустом;
3. Полигонална проста греда;
4. Решеткасти носач;
5. Герберов носач;
6. Лук на три зглоба;
7. Континуални носач;
приказано више решених примера, за различите геометрије носача и различта оптерећења. Приказани примери се често срећу у објектима у пракси, а успешно савладано градиво на вежбама омогућиће да студенти са лакоћом могу да савладају и било које друге сличне типове конструкција.",
publisher = "Универзитет у Београду- Архитектонски факултет",
title = "Принципи конструисања архитектонских објеката : практикум",
url = "https://hdl.handle.net/21.15107/rcub_raf_1550"
}

Obradović, R., Petrović, M.,& Kontić, A.. (2019). Принципи конструисања архитектонских објеката : практикум. 
Универзитет у Београду- Архитектонски факултет..
https://hdl.handle.net/21.15107/rcub_raf_1550

Obradović R, Petrović M, Kontić A. Принципи конструисања архитектонских објеката : практикум. 2019;.
https://hdl.handle.net/21.15107/rcub_raf_1550 .

Obradović, Radojko, Petrović, Milica, Kontić, Ana, "Принципи конструисања архитектонских објеката : практикум" (2019),
https://hdl.handle.net/21.15107/rcub_raf_1550 .

TY  - CONF
AU  - Obradović, Radojko
AU  - Sudimac, Budimir
AU  - Petrović, Milica
PY  - 2019
UR  - https://raf.arh.bg.ac.rs/handle/123456789/1754
AB  - Savremeno društvo se suočava sa novim i drugačijim izazovima. Obnovljivih resursa je sve
manje. Životna sredina je zagađena. Potrebe savremenog čoveka su sve veće i njihovo
zadovoljenje zahteva sve više energije i materijalnih resursa. Proizvodnja materijala koji se
koriste za izgradnju objekata zahteva prirodne resurse i veliku količinu energije. U
eksploataciji objekata postoji potreba za grejanjem i hlađenjem, za šta je takođe
neophodna energija. Moguće rešenje je upotreba prirodnih materijala koji su tradicionalno
bili primenjivani vekovima, a koji su potisnuti razvojem industrije i širokom primenom
betona i čelika. Slama, kao materijal, postoji više od 2000 godina i predstavlja nusproizvod
pri uzgajanju pšenice, raži, pirinča. Proizvodnja slame ne zahteva primarnu energiju.
Karakteristike balirane slame su takve da nije potrebna dodatna termička i zvučna izolacija.
Primenom balirane slame moguće je materijalom, koji je gotovo besplatan, postići značajne
uštede energije i pomoći u očuvanju životne sredine.
AB  - Modern society is faced with new challenges. Renewable resources are disappearing. The
environment is polluted. The production of materials for construction requires natural
resources and a great amount of energy. In the exploitation of buildings a lot of energy is
used for heating and cooling. Possible solution lies in the application of natural materials
that were traditionally used for centuries and were suppressed by the industry’s
development and the extended use of concrete and steel. Straw, as a material, exists for
more than 2000 years. It is a by-product in the growing of wheat, rye, and rice. The
production of straw doesn’t need primary energy. The characteristics of straw-bales are
such that no additional thermal and sound insulation is needed. With the application of
straw-bales, a material that is almost free, it is possible to achieve significant savings in
energy and to help preserve the environment.
PB  - Univerzitet u Beogradu - Arhitektonski fakultet
C3  - Zbornik radova [Elektronski izvor] / Sedmi nacionalni naučno-stručni skup sa međunarodnim učešćem Instalacije & arhitektura 2019, Beograd, 05. decembar
T1  - Уштеда енергије применом балиране сламе
T1  - Using straw-bales for energy saving
UR  - https://hdl.handle.net/21.15107/rcub_raf_1754
ER  - 

@conference{
author = "Obradović, Radojko and Sudimac, Budimir and Petrović, Milica",
year = "2019",
abstract = "Savremeno društvo se suočava sa novim i drugačijim izazovima. Obnovljivih resursa je sve
manje. Životna sredina je zagađena. Potrebe savremenog čoveka su sve veće i njihovo
zadovoljenje zahteva sve više energije i materijalnih resursa. Proizvodnja materijala koji se
koriste za izgradnju objekata zahteva prirodne resurse i veliku količinu energije. U
eksploataciji objekata postoji potreba za grejanjem i hlađenjem, za šta je takođe
neophodna energija. Moguće rešenje je upotreba prirodnih materijala koji su tradicionalno
bili primenjivani vekovima, a koji su potisnuti razvojem industrije i širokom primenom
betona i čelika. Slama, kao materijal, postoji više od 2000 godina i predstavlja nusproizvod
pri uzgajanju pšenice, raži, pirinča. Proizvodnja slame ne zahteva primarnu energiju.
Karakteristike balirane slame su takve da nije potrebna dodatna termička i zvučna izolacija.
Primenom balirane slame moguće je materijalom, koji je gotovo besplatan, postići značajne
uštede energije i pomoći u očuvanju životne sredine., Modern society is faced with new challenges. Renewable resources are disappearing. The
environment is polluted. The production of materials for construction requires natural
resources and a great amount of energy. In the exploitation of buildings a lot of energy is
used for heating and cooling. Possible solution lies in the application of natural materials
that were traditionally used for centuries and were suppressed by the industry’s
development and the extended use of concrete and steel. Straw, as a material, exists for
more than 2000 years. It is a by-product in the growing of wheat, rye, and rice. The
production of straw doesn’t need primary energy. The characteristics of straw-bales are
such that no additional thermal and sound insulation is needed. With the application of
straw-bales, a material that is almost free, it is possible to achieve significant savings in
energy and to help preserve the environment.",
publisher = "Univerzitet u Beogradu - Arhitektonski fakultet",
journal = "Zbornik radova [Elektronski izvor] / Sedmi nacionalni naučno-stručni skup sa međunarodnim učešćem Instalacije & arhitektura 2019, Beograd, 05. decembar",
title = "Уштеда енергије применом балиране сламе, Using straw-bales for energy saving",
url = "https://hdl.handle.net/21.15107/rcub_raf_1754"
}

Obradović, R., Sudimac, B.,& Petrović, M.. (2019). Уштеда енергије применом балиране сламе. in Zbornik radova [Elektronski izvor] / Sedmi nacionalni naučno-stručni skup sa međunarodnim učešćem Instalacije & arhitektura 2019, Beograd, 05. decembar
Univerzitet u Beogradu - Arhitektonski fakultet..
https://hdl.handle.net/21.15107/rcub_raf_1754

Obradović R, Sudimac B, Petrović M. Уштеда енергије применом балиране сламе. in Zbornik radova [Elektronski izvor] / Sedmi nacionalni naučno-stručni skup sa međunarodnim učešćem Instalacije & arhitektura 2019, Beograd, 05. decembar. 2019;.
https://hdl.handle.net/21.15107/rcub_raf_1754 .

Obradović, Radojko, Sudimac, Budimir, Petrović, Milica, "Уштеда енергије применом балиране сламе" in Zbornik radova [Elektronski izvor] / Sedmi nacionalni naučno-stručni skup sa međunarodnim učešćem Instalacije & arhitektura 2019, Beograd, 05. decembar (2019),
https://hdl.handle.net/21.15107/rcub_raf_1754 .

TY  - JOUR
AU  - Pamučar, Dragan
AU  - Badi, Ibrahim
AU  - Korica, Sanja
AU  - Obradović, Radojko
PY  - 2018
UR  - https://raf.arh.bg.ac.rs/handle/123456789/299
AB  - Rapid increases in energy demand and international drive to reduce carbon emissions from fossil fuels have led many oil-rich countries to diversify their energy portfolio and resources. Libya is one of these countries, and it has recently become interested in utilizing its renewable-energy resources in order to reduce financial and energy dependency on oil reserves. This paper introduces an original multicriteria decision-making Pairwise-CODAS model in which the modification of the CODAS method was made using Linguistic Neutrosophic Numbers (LNN). The paper also suggests a new LNN Pairwise (LNN PW) model for determining the weight coefficients of the criteria developed by the authors. By integrating these models with linguistic neutrosophic numbers, it was shown that it is possible to a significant extent to eliminate subjective qualitative assessments and assumptions by decision makers in complex decision-making conditions. The LNN PW-CODAS model was tested and validated in a case study of the selection of optimal Power-Generation Technology (PGT) in Libya. Testing of the model showed that the proposed model based on linguistic neutrosophic numbers provides objective expert evaluation by eliminating subjective assessments when determining the numerical values of criteria. A sensitivity analysis of the LNN PW-CODAS model, carried out through 68 scenarios of changes in the weight coefficients, showed a high degree of stability of the solutions obtained in the ranking of the alternatives. The results were validated by comparison with LNN extensions of four multicriteria decision-making models.
PB  - MDPI AG
T2  - Energies
T1  - A Novel Approach for the Selection of Power-Generation Technology Using a Linguistic Neutrosophic CODAS Method: A Case Study in Libya
VL  - 11
IS  - 9
DO  - 10.3390/en11092489
ER  - 

@article{
author = "Pamučar, Dragan and Badi, Ibrahim and Korica, Sanja and Obradović, Radojko",
year = "2018",
abstract = "Rapid increases in energy demand and international drive to reduce carbon emissions from fossil fuels have led many oil-rich countries to diversify their energy portfolio and resources. Libya is one of these countries, and it has recently become interested in utilizing its renewable-energy resources in order to reduce financial and energy dependency on oil reserves. This paper introduces an original multicriteria decision-making Pairwise-CODAS model in which the modification of the CODAS method was made using Linguistic Neutrosophic Numbers (LNN). The paper also suggests a new LNN Pairwise (LNN PW) model for determining the weight coefficients of the criteria developed by the authors. By integrating these models with linguistic neutrosophic numbers, it was shown that it is possible to a significant extent to eliminate subjective qualitative assessments and assumptions by decision makers in complex decision-making conditions. The LNN PW-CODAS model was tested and validated in a case study of the selection of optimal Power-Generation Technology (PGT) in Libya. Testing of the model showed that the proposed model based on linguistic neutrosophic numbers provides objective expert evaluation by eliminating subjective assessments when determining the numerical values of criteria. A sensitivity analysis of the LNN PW-CODAS model, carried out through 68 scenarios of changes in the weight coefficients, showed a high degree of stability of the solutions obtained in the ranking of the alternatives. The results were validated by comparison with LNN extensions of four multicriteria decision-making models.",
publisher = "MDPI AG",
journal = "Energies",
title = "A Novel Approach for the Selection of Power-Generation Technology Using a Linguistic Neutrosophic CODAS Method: A Case Study in Libya",
volume = "11",
number = "9",
doi = "10.3390/en11092489"
}

Pamučar, D., Badi, I., Korica, S.,& Obradović, R.. (2018). A Novel Approach for the Selection of Power-Generation Technology Using a Linguistic Neutrosophic CODAS Method: A Case Study in Libya. in Energies
MDPI AG., 11(9).
https://doi.org/10.3390/en11092489

Pamučar D, Badi I, Korica S, Obradović R. A Novel Approach for the Selection of Power-Generation Technology Using a Linguistic Neutrosophic CODAS Method: A Case Study in Libya. in Energies. 2018;11(9).
doi:10.3390/en11092489 .

Pamučar, Dragan, Badi, Ibrahim, Korica, Sanja, Obradović, Radojko, "A Novel Approach for the Selection of Power-Generation Technology Using a Linguistic Neutrosophic CODAS Method: A Case Study in Libya" in Energies, 11, no. 9 (2018),
https://doi.org/10.3390/en11092489 . .

TY  - JOUR
AU  - Pamučar, Dragan
AU  - Mihajlović, Milan
AU  - Obradović, Radojko
AU  - Atanasković, P.
PY  - 2017
UR  - https://raf.arh.bg.ac.rs/handle/123456789/251
AB  - This paper presents a novel approach for treating uncertainty in the multi-criteria decision making process by introducing interval rough numbers (IRN). The IRN approach enables decision making using only the internal knowledge incorporated in the data provided by the decision maker. A hybrid multi-criteria model was developed based on IRN, and demonstrated using the example of the bidder selection process in the state administration public procurement procedure. The first segment of the hybrid model deals with the rough interval DEMATEL-ANP (IR'DANP) model, which enables more objective expert evaluation of criteria in a subjective environment than the traditional/crisp approach. In the second segment, the evaluation is enabled by applying the new rough interval MAIRCA method, which introduces mathematical tools and shows high stability concerning changes in the nature and characteristics of the criteria. The results of the hybrid IR'DANP-MAIRCA model were analyzed using 36 scenarios of sensitivity analysis, which showed high stability of the results. The results of the interval rough method were compared with the fuzzy extensions of the TOPSIS, VIKOR, MABAC, TODIM, ELECTRE 1 and DEMATEL-ANP models.
PB  - Elsevier Ltd
T2  - Expert systems with applications
T1  - Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model
VL  - 88
SP  - 58
EP  - 80
DO  - 10.1016/j.eswa.2017.06.037
ER  - 

@article{
author = "Pamučar, Dragan and Mihajlović, Milan and Obradović, Radojko and Atanasković, P.",
year = "2017",
abstract = "This paper presents a novel approach for treating uncertainty in the multi-criteria decision making process by introducing interval rough numbers (IRN). The IRN approach enables decision making using only the internal knowledge incorporated in the data provided by the decision maker. A hybrid multi-criteria model was developed based on IRN, and demonstrated using the example of the bidder selection process in the state administration public procurement procedure. The first segment of the hybrid model deals with the rough interval DEMATEL-ANP (IR'DANP) model, which enables more objective expert evaluation of criteria in a subjective environment than the traditional/crisp approach. In the second segment, the evaluation is enabled by applying the new rough interval MAIRCA method, which introduces mathematical tools and shows high stability concerning changes in the nature and characteristics of the criteria. The results of the hybrid IR'DANP-MAIRCA model were analyzed using 36 scenarios of sensitivity analysis, which showed high stability of the results. The results of the interval rough method were compared with the fuzzy extensions of the TOPSIS, VIKOR, MABAC, TODIM, ELECTRE 1 and DEMATEL-ANP models.",
publisher = "Elsevier Ltd",
journal = "Expert systems with applications",
title = "Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model",
volume = "88",
pages = "58-80",
doi = "10.1016/j.eswa.2017.06.037"
}

Pamučar, D., Mihajlović, M., Obradović, R.,& Atanasković, P.. (2017). Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model. in Expert systems with applications
Elsevier Ltd., 88, 58-80.
https://doi.org/10.1016/j.eswa.2017.06.037

Pamučar D, Mihajlović M, Obradović R, Atanasković P. Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model. in Expert systems with applications. 2017;88:58-80.
doi:10.1016/j.eswa.2017.06.037 .

Pamučar, Dragan, Mihajlović, Milan, Obradović, Radojko, Atanasković, P., "Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model" in Expert systems with applications, 88 (2017):58-80,
https://doi.org/10.1016/j.eswa.2017.06.037 . .

TY  - JOUR
AU  - Pamučar, Dragan
AU  - Mihajlović, Milan
AU  - Obradović, Radojko
AU  - Atanasković, P.
PY  - 2017
UR  - https://raf.arh.bg.ac.rs/handle/123456789/397
AB  - This paper presents a novel approach for treating uncertainty in the multi-criteria decision making process by introducing interval rough numbers (IRN). The IRN approach enables decision making using only the internal knowledge incorporated in the data provided by the decision maker. A hybrid multi-criteria model was developed based on IRN, and demonstrated using the example of the bidder selection process in the state administration public procurement procedure. The first segment of the hybrid model deals with the rough interval DEMATEL-ANP (IR'DANP) model, which enables more objective expert evaluation of criteria in a subjective environment than the traditional/crisp approach. In the second segment, the evaluation is enabled by applying the new rough interval MAIRCA method, which introduces mathematical tools and shows high stability concerning changes in the nature and characteristics of the criteria. The results of the hybrid IR'DANP-MAIRCA model were analyzed using 36 scenarios of sensitivity analysis, which showed high stability of the results. The results of the interval rough method were compared with the fuzzy extensions of the TOPSIS, VIKOR, MABAC, TODIM, ELECTRE 1 and DEMATEL-ANP models.
PB  - Elsevier Ltd
T2  - Expert systems with applications
T1  - Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model
VL  - 88
SP  - 58
EP  - 80
DO  - 10.1016/j.eswa.2017.06.037
ER  - 

@article{
author = "Pamučar, Dragan and Mihajlović, Milan and Obradović, Radojko and Atanasković, P.",
year = "2017",
abstract = "This paper presents a novel approach for treating uncertainty in the multi-criteria decision making process by introducing interval rough numbers (IRN). The IRN approach enables decision making using only the internal knowledge incorporated in the data provided by the decision maker. A hybrid multi-criteria model was developed based on IRN, and demonstrated using the example of the bidder selection process in the state administration public procurement procedure. The first segment of the hybrid model deals with the rough interval DEMATEL-ANP (IR'DANP) model, which enables more objective expert evaluation of criteria in a subjective environment than the traditional/crisp approach. In the second segment, the evaluation is enabled by applying the new rough interval MAIRCA method, which introduces mathematical tools and shows high stability concerning changes in the nature and characteristics of the criteria. The results of the hybrid IR'DANP-MAIRCA model were analyzed using 36 scenarios of sensitivity analysis, which showed high stability of the results. The results of the interval rough method were compared with the fuzzy extensions of the TOPSIS, VIKOR, MABAC, TODIM, ELECTRE 1 and DEMATEL-ANP models.",
publisher = "Elsevier Ltd",
journal = "Expert systems with applications",
title = "Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model",
volume = "88",
pages = "58-80",
doi = "10.1016/j.eswa.2017.06.037"
}

Pamučar, D., Mihajlović, M., Obradović, R.,& Atanasković, P.. (2017). Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model. in Expert systems with applications
Elsevier Ltd., 88, 58-80.
https://doi.org/10.1016/j.eswa.2017.06.037

Pamučar D, Mihajlović M, Obradović R, Atanasković P. Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model. in Expert systems with applications. 2017;88:58-80.
doi:10.1016/j.eswa.2017.06.037 .

Pamučar, Dragan, Mihajlović, Milan, Obradović, Radojko, Atanasković, P., "Novel approach to group multi-criteria decision making based on interval rough numbers: Hybrid DEMATEL-ANP-MAIRCA model" in Expert systems with applications, 88 (2017):58-80,
https://doi.org/10.1016/j.eswa.2017.06.037 . .

TY  - JOUR
AU  - Grbić, Miodrag
AU  - Glišić, Milan
AU  - Obradović, Radojko
PY  - 2016
UR  - https://raf.arh.bg.ac.rs/handle/123456789/213
AB  - Recycling has an important role in modern production and in environment preservation. Introduction of recycled PET ((Poly) Ethylene-terephthalate) as straps for reinforcement bars in concrete construction elements can help these important issues. By using an experimental method it is shown that PET straps made with minimal investment, on site and with manual production can replace ‘annealed’ wire as element for connection of reinforcement bars. An overview of some regulation and procedures is presented and used for eligibility assessment of the proposed straps made of recycled material. Also an overview of commonly used connections is given so it can be compared with the proposed ones.
AB  - Reciklaža zauzima sve važniju ulogu u modernoj proizvodnji i očuvanju životne sredine. Uvođenje recikliranog PET-a ((Poli) Etilen-tereftalat) kao veze za armaturne šipke u betonskim konstruktivnim elementima može doprineti ovim važnim ciljevima. Korišćenjem eksperimentalne metode pokazano je da ovakve veze načinjene od recikliranog PET-a, uz minimalne investicije, napravljene na licu mesta i ručnom izradom mogu zameniti “paljenu”žicu kao element kojim se ostvaruje konekcija između armaturnih šipki. Dat je i kratak pregled nekih propisa i procedura koje su korišćene za procenu predloženih veza od navedenog recikliranog materijala. Takođe je dat i pregled najčešće korićenih veza kako bi moglo da se napravi poređenje sa predloženim rešenjem.
PB  - Univerzitet u Nišu, Niš
T2  - Facta universitatis - series: Architecture and Civil Engineering
T1  - Recycled pet ((Poly) ethylene-terephthalate) used as straps for rebar binding
T1  - Upotreba recikliranog PET-a ((Poli) etilen-tereftalat) za vezivanje armature
VL  - 14
IS  - 3
SP  - 319
EP  - 329
DO  - 10.2298/FUACE1603319G
ER  - 

@article{
author = "Grbić, Miodrag and Glišić, Milan and Obradović, Radojko",
year = "2016",
abstract = "Recycling has an important role in modern production and in environment preservation. Introduction of recycled PET ((Poly) Ethylene-terephthalate) as straps for reinforcement bars in concrete construction elements can help these important issues. By using an experimental method it is shown that PET straps made with minimal investment, on site and with manual production can replace ‘annealed’ wire as element for connection of reinforcement bars. An overview of some regulation and procedures is presented and used for eligibility assessment of the proposed straps made of recycled material. Also an overview of commonly used connections is given so it can be compared with the proposed ones., Reciklaža zauzima sve važniju ulogu u modernoj proizvodnji i očuvanju životne sredine. Uvođenje recikliranog PET-a ((Poli) Etilen-tereftalat) kao veze za armaturne šipke u betonskim konstruktivnim elementima može doprineti ovim važnim ciljevima. Korišćenjem eksperimentalne metode pokazano je da ovakve veze načinjene od recikliranog PET-a, uz minimalne investicije, napravljene na licu mesta i ručnom izradom mogu zameniti “paljenu”žicu kao element kojim se ostvaruje konekcija između armaturnih šipki. Dat je i kratak pregled nekih propisa i procedura koje su korišćene za procenu predloženih veza od navedenog recikliranog materijala. Takođe je dat i pregled najčešće korićenih veza kako bi moglo da se napravi poređenje sa predloženim rešenjem.",
publisher = "Univerzitet u Nišu, Niš",
journal = "Facta universitatis - series: Architecture and Civil Engineering",
title = "Recycled pet ((Poly) ethylene-terephthalate) used as straps for rebar binding, Upotreba recikliranog PET-a ((Poli) etilen-tereftalat) za vezivanje armature",
volume = "14",
number = "3",
pages = "319-329",
doi = "10.2298/FUACE1603319G"
}

Grbić, M., Glišić, M.,& Obradović, R.. (2016). Recycled pet ((Poly) ethylene-terephthalate) used as straps for rebar binding. in Facta universitatis - series: Architecture and Civil Engineering
Univerzitet u Nišu, Niš., 14(3), 319-329.
https://doi.org/10.2298/FUACE1603319G

Grbić M, Glišić M, Obradović R. Recycled pet ((Poly) ethylene-terephthalate) used as straps for rebar binding. in Facta universitatis - series: Architecture and Civil Engineering. 2016;14(3):319-329.
doi:10.2298/FUACE1603319G .

Grbić, Miodrag, Glišić, Milan, Obradović, Radojko, "Recycled pet ((Poly) ethylene-terephthalate) used as straps for rebar binding" in Facta universitatis - series: Architecture and Civil Engineering, 14, no. 3 (2016):319-329,
https://doi.org/10.2298/FUACE1603319G . .

TY  - JOUR
AU  - Vasiljević-Tomić, Dragana
AU  - Obradović, Radojko
PY  - 2015
UR  - https://raf.arh.bg.ac.rs/handle/123456789/202
AB  - The paper has analyzed the contemporary standards that all democracies have embraced. A special emphasis has been placed on international conventions and rules, as well as the laws to protect the rights of all members of a modern social community. It is its duty to look after all its members and eliminate any form of discrimination, and even a threat of it. The European Concept for Accessibility promotes a new social model, designed to change entirely the attitude to the handicapped. The Concept offers a completely new approach, viewing the community as a whole. This integrated approach stretches to the needs of the community and the needs of each and every member of it, making no difference between individual groups within the population. Instead, it creates the environment to satisfy the needs of each individual member and, by extension, the community at large. The role of architecture is to recognize the needs of a community and take the lead in reshaping the standards to create a new environment accessible to all its members. This will give architecture a fundamental dimension, and make it the integrative factor to blend the community together.
AB  - Rad je baziran na analizi savremenih standarda koji važe u demokratskim društvima. Posebno su analizirane međunarodne konvencije i pravila i analizirana je regulative koja se bavi zaštitom prava svih članova savremene društvene zajednice. Zadatak savremene društvene zajednice je da brine o svim članovima zajednice id a otkloni svaki, pa i potencijalni oblik diskriminacije. Primenom Evropskog koncepta pristupačnosti ostvarila bi se promocija novog socijalnog modela kojim bi se u potpunosti promenio odnos prema osobama sa inaliditetom. Koncept predviđa suštinski drugačiji pristup, društvenu zajednicu posmatra kao celinu, pa tako i i potrebe zajednice kao celine, a onda i svakog pojedinačnog člana i ne pravi razliku između pojedinih grupa u ukupnoj populaciji, nego rešenjima ispunjava uslove za zadovoljenje potreba svakog pojedinačnog člana, a time i zajednice u celini. Uloga arhitekture je da prepozna potrebe društvene zajednice i preuzme važnu ulogu u kreiranju standard za novo okruženje, koje će biti dostupno svim članovima zajednice. Time arhitektura dobija svoju suštinsku dimenziju i postaje integrativni faktor zajednice kao celine. Pojam: arhitektura, društvena zajednica, pristupačnost, dostupnost za sve, inkluzija, inkluzivni dizajn, univerzalni dizajn. Vrednosti/smernice, principi/načela, standardi/norme/tehnički propisi, zakonska regulative. Teorijski okvir: istorijski pregled (međunarodni - nacionalna usklađenost).
PB  - Univerzitet u Nišu, Niš
T2  - Facta universitatis - series: Architecture and Civil Engineering
T1  - Arcitecture: Inclusive culture: Protection of persons with disabilities
T1  - Arhitektura - inkluzivna kultura - zaštita osoba sa invaliditetom
VL  - 13
IS  - 1
SP  - 47
EP  - 56
DO  - 10.2298/FUACE1501047V
ER  - 

@article{
author = "Vasiljević-Tomić, Dragana and Obradović, Radojko",
year = "2015",
abstract = "The paper has analyzed the contemporary standards that all democracies have embraced. A special emphasis has been placed on international conventions and rules, as well as the laws to protect the rights of all members of a modern social community. It is its duty to look after all its members and eliminate any form of discrimination, and even a threat of it. The European Concept for Accessibility promotes a new social model, designed to change entirely the attitude to the handicapped. The Concept offers a completely new approach, viewing the community as a whole. This integrated approach stretches to the needs of the community and the needs of each and every member of it, making no difference between individual groups within the population. Instead, it creates the environment to satisfy the needs of each individual member and, by extension, the community at large. The role of architecture is to recognize the needs of a community and take the lead in reshaping the standards to create a new environment accessible to all its members. This will give architecture a fundamental dimension, and make it the integrative factor to blend the community together., Rad je baziran na analizi savremenih standarda koji važe u demokratskim društvima. Posebno su analizirane međunarodne konvencije i pravila i analizirana je regulative koja se bavi zaštitom prava svih članova savremene društvene zajednice. Zadatak savremene društvene zajednice je da brine o svim članovima zajednice id a otkloni svaki, pa i potencijalni oblik diskriminacije. Primenom Evropskog koncepta pristupačnosti ostvarila bi se promocija novog socijalnog modela kojim bi se u potpunosti promenio odnos prema osobama sa inaliditetom. Koncept predviđa suštinski drugačiji pristup, društvenu zajednicu posmatra kao celinu, pa tako i i potrebe zajednice kao celine, a onda i svakog pojedinačnog člana i ne pravi razliku između pojedinih grupa u ukupnoj populaciji, nego rešenjima ispunjava uslove za zadovoljenje potreba svakog pojedinačnog člana, a time i zajednice u celini. Uloga arhitekture je da prepozna potrebe društvene zajednice i preuzme važnu ulogu u kreiranju standard za novo okruženje, koje će biti dostupno svim članovima zajednice. Time arhitektura dobija svoju suštinsku dimenziju i postaje integrativni faktor zajednice kao celine. Pojam: arhitektura, društvena zajednica, pristupačnost, dostupnost za sve, inkluzija, inkluzivni dizajn, univerzalni dizajn. Vrednosti/smernice, principi/načela, standardi/norme/tehnički propisi, zakonska regulative. Teorijski okvir: istorijski pregled (međunarodni - nacionalna usklađenost).",
publisher = "Univerzitet u Nišu, Niš",
journal = "Facta universitatis - series: Architecture and Civil Engineering",
title = "Arcitecture: Inclusive culture: Protection of persons with disabilities, Arhitektura - inkluzivna kultura - zaštita osoba sa invaliditetom",
volume = "13",
number = "1",
pages = "47-56",
doi = "10.2298/FUACE1501047V"
}

Vasiljević-Tomić, D.,& Obradović, R.. (2015). Arcitecture: Inclusive culture: Protection of persons with disabilities. in Facta universitatis - series: Architecture and Civil Engineering
Univerzitet u Nišu, Niš., 13(1), 47-56.
https://doi.org/10.2298/FUACE1501047V

Vasiljević-Tomić D, Obradović R. Arcitecture: Inclusive culture: Protection of persons with disabilities. in Facta universitatis - series: Architecture and Civil Engineering. 2015;13(1):47-56.
doi:10.2298/FUACE1501047V .

Vasiljević-Tomić, Dragana, Obradović, Radojko, "Arcitecture: Inclusive culture: Protection of persons with disabilities" in Facta universitatis - series: Architecture and Civil Engineering, 13, no. 1 (2015):47-56,
https://doi.org/10.2298/FUACE1501047V . .

TY  - THES
AU  - Obradović, Radojko M.
PY  - 2015
UR  - http://eteze.bg.ac.rs/application/showtheses?thesesId=2942
UR  - https://fedorabg.bg.ac.rs/fedora/get/o:11186/bdef:Content/download
UR  - http://vbs.rs/scripts/cobiss?command=DISPLAY&base=70036&RID=513033105
UR  - http://nardus.mpn.gov.rs/123456789/5476
UR  - https://raf.arh.bg.ac.rs/handle/123456789/366
AB  - The paper has analysed the behavior of individual unplastered and plastered straw bales, and unplastered and plastered straw bale walls. The use of straw bales in building loadbearing walls for one-storey structures has been analysed. Based on the experiment carried out within this study, the module of elasticity for unplastered straw bales was determined to be 400 kPa, and for the plastered straw bales 1580 kPa. For the straw bales the density of 1.18 kN/m3 was established. Creep-tests have been carried out, and the models of behavior defined, as well as the values of initial compression and creep. During the fire test, the wall plastered on one side only showed no visible damage after two-hour exposure, nor did structural features change. The available literature provided for noise and thermal protection levels. The economic analysis, which was part of the paper, underlined significant financial advantages of straw bale building. Based on the experimental and theoretical analysis, straw bales meet all necessary criteria and can be used in load-bearing buildings.
AB  - У овом раду је анализирано је понашање појединачних немалтерисаних и малтерисаних бала сламе и немалтерисаних и малтерисаних зидова од бала сламе. Анализирана је могућност примене бала сламе за израду носећих зидова приземних објеката. На основу спроведеног експеримента утврђен је модул еластичности за немалтерисане бале сламе од око 400 kPa, а за малтерисане бале сламе од 1580 kPa. За бале сламе одређена је запреминска тежина од 1.18 kN/m3. Испитиване су и реолошке карактеристике зидова и дефинисани су модели понашања, као и величине тренутних и временских деформација. При испитивању на пожар једнострани малтерисани зид после два сата под дејством пламена није имао видних оштећења и нису биле битно промењене конструктивне карактеристике. Анализом доступне литературе дошло се до нивоа заштите од буке, као и нивоа топлотне заштите. Економска анализа показала је значајне финансијске погодности при градњи сламом. На основу спроведене експериментално-теоријске анализе доказано је да бале сламе задовољавају све потребне критеријуме, као и да се могу примењивати за израду носећих зидова у конструкцијама.
PB  - Универзитет у Београду, Архитектонски факултет
T2  - Универзитет у Београду
T1  - Експериментално-теоријска анализа примене бала сламе у конструкцијама
UR  - https://hdl.handle.net/21.15107/rcub_nardus_5476
ER  - 

@phdthesis{
author = "Obradović, Radojko M.",
year = "2015",
abstract = "The paper has analysed the behavior of individual unplastered and plastered straw bales, and unplastered and plastered straw bale walls. The use of straw bales in building loadbearing walls for one-storey structures has been analysed. Based on the experiment carried out within this study, the module of elasticity for unplastered straw bales was determined to be 400 kPa, and for the plastered straw bales 1580 kPa. For the straw bales the density of 1.18 kN/m3 was established. Creep-tests have been carried out, and the models of behavior defined, as well as the values of initial compression and creep. During the fire test, the wall plastered on one side only showed no visible damage after two-hour exposure, nor did structural features change. The available literature provided for noise and thermal protection levels. The economic analysis, which was part of the paper, underlined significant financial advantages of straw bale building. Based on the experimental and theoretical analysis, straw bales meet all necessary criteria and can be used in load-bearing buildings., У овом раду је анализирано је понашање појединачних немалтерисаних и малтерисаних бала сламе и немалтерисаних и малтерисаних зидова од бала сламе. Анализирана је могућност примене бала сламе за израду носећих зидова приземних објеката. На основу спроведеног експеримента утврђен је модул еластичности за немалтерисане бале сламе од око 400 kPa, а за малтерисане бале сламе од 1580 kPa. За бале сламе одређена је запреминска тежина од 1.18 kN/m3. Испитиване су и реолошке карактеристике зидова и дефинисани су модели понашања, као и величине тренутних и временских деформација. При испитивању на пожар једнострани малтерисани зид после два сата под дејством пламена није имао видних оштећења и нису биле битно промењене конструктивне карактеристике. Анализом доступне литературе дошло се до нивоа заштите од буке, као и нивоа топлотне заштите. Економска анализа показала је значајне финансијске погодности при градњи сламом. На основу спроведене експериментално-теоријске анализе доказано је да бале сламе задовољавају све потребне критеријуме, као и да се могу примењивати за израду носећих зидова у конструкцијама.",
publisher = "Универзитет у Београду, Архитектонски факултет",
journal = "Универзитет у Београду",
title = "Експериментално-теоријска анализа примене бала сламе у конструкцијама",
url = "https://hdl.handle.net/21.15107/rcub_nardus_5476"
}

Obradović, R. M.. (2015). Експериментално-теоријска анализа примене бала сламе у конструкцијама. in Универзитет у Београду
Универзитет у Београду, Архитектонски факултет..
https://hdl.handle.net/21.15107/rcub_nardus_5476

Obradović RM. Експериментално-теоријска анализа примене бала сламе у конструкцијама. in Универзитет у Београду. 2015;.
https://hdl.handle.net/21.15107/rcub_nardus_5476 .

Obradović, Radojko M., "Експериментално-теоријска анализа примене бала сламе у конструкцијама" in Универзитет у Београду (2015),
https://hdl.handle.net/21.15107/rcub_nardus_5476 .

TY  - CONF
AU  - Vasiljevic Tomic, Dragana
AU  - Obradović, Radojko
PY  - 2014
UR  - https://raf.arh.bg.ac.rs/handle/123456789/680
AB  - This paper is based on the analysis of several international conventions and rules, as
well as national regulations dealing with protection of rights of all members of
community, especially preventing all potential forms of discrimination and with
special focus on people with disabilities. Application of the European accessibility
concept [i] would achieve the promotion of a new social model that would completely
transform the relation towards the persons with disabilities. The concept suggests
essentially different approach – treating the community as a whole, and thus all its
needs and needs of each community member as one, making no difference among
individual groups within the overall population, but provides the solutions that meet
the conditions to fulfil the need of each individual member and the community as a
whole. Terms: accessibility, access to all, inclusion, inclusive design, universal
design, values/directions, principles, standards/norms/technical regulations,
legislation. Theoretical frame: historical overview (international – national
compatibility)
PB  - Belgrade : Faculty of Architecture
C3  - Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
T1  - Protection of person whit disabilities: implementation of accessibility standards
SP  - 160
EP  - 166
UR  - https://hdl.handle.net/21.15107/rcub_raf_680
ER  - 

@conference{
author = "Vasiljevic Tomic, Dragana and Obradović, Radojko",
year = "2014",
abstract = "This paper is based on the analysis of several international conventions and rules, as
well as national regulations dealing with protection of rights of all members of
community, especially preventing all potential forms of discrimination and with
special focus on people with disabilities. Application of the European accessibility
concept [i] would achieve the promotion of a new social model that would completely
transform the relation towards the persons with disabilities. The concept suggests
essentially different approach – treating the community as a whole, and thus all its
needs and needs of each community member as one, making no difference among
individual groups within the overall population, but provides the solutions that meet
the conditions to fulfil the need of each individual member and the community as a
whole. Terms: accessibility, access to all, inclusion, inclusive design, universal
design, values/directions, principles, standards/norms/technical regulations,
legislation. Theoretical frame: historical overview (international – national
compatibility)",
publisher = "Belgrade : Faculty of Architecture",
journal = "Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014",
title = "Protection of person whit disabilities: implementation of accessibility standards",
pages = "160-166",
url = "https://hdl.handle.net/21.15107/rcub_raf_680"
}

Vasiljevic Tomic, D.,& Obradović, R.. (2014). Protection of person whit disabilities: implementation of accessibility standards. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014
Belgrade : Faculty of Architecture., 160-166.
https://hdl.handle.net/21.15107/rcub_raf_680

Vasiljevic Tomic D, Obradović R. Protection of person whit disabilities: implementation of accessibility standards. in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014. 2014;:160-166.
https://hdl.handle.net/21.15107/rcub_raf_680 .

Vasiljevic Tomic, Dragana, Obradović, Radojko, "Protection of person whit disabilities: implementation of accessibility standards" in Places and Technologies 2014 [Elektronski izvor] : keeping up with technologies to improve places : conference proceedings : 1st international academic conference, Belgrade, 3-4. April 2014 (2014):160-166,
https://hdl.handle.net/21.15107/rcub_raf_680 .