Condition and behaviour diagnostics of drive groups on belt conveyors
Abstract
Belt conveyors are complex systems with drive groups as functionally very important components. Their proper and reliable operational life is directly related to durability of the load-bearing steel structures. Drive units often have problems linked to increasing of vibrations of steel structures. Drive units on 2nd BWE-BC-S system on Drmno open cast mine (Serbia) and on waste dump on Pljevlja open cast mine (Montenegro) were used as the examples of behaviour and condition diagnostics. As the most suitable diagnostic tool, numerical-experimental procedure was defined in the paper. It showed that the considered constructions failed due to incorrect operational parameters related to vibrations of structures. Appropriate strength diagnostic gave solutions for rehabilitation and reconstruction. The analysis was done using computer calculation, finite element method, with the required experimental measurements. This enabled determination of the actual behaviour of structure, reliable predic...tion of its response in exploitation, determination of the cause for unfavourable behaviour or failure, assessment of service life time of reliable exploitation and the level of revitalization. As exploitation problems develop mostly from improper geometry design, presented methodology is necessary in the engineering analysis. This approach is justified due to low costs with a high level of the results.
Keywords:
Failure analysis / Finite element analysis / Repairs / Stress distribution / VibrationSource:
Engineering failure analysis, 2012, 22, 28-37Funding / projects:
- Developed new methods for diagnosis and examination mechanical structures (RS-35040)
- Pressure equipment integrity under simultaneous effect of fatigue loading and temperature (RS-35011)
DOI: 10.1016/j.engfailanal.2012.01.001
ISSN: 1350-6307
WoS: 000302927300004
Scopus: 2-s2.0-84856108076
Institution/Community
Arhitektonski fakultetTY - JOUR AU - Maneski, Tasko AU - Jovančić, Predrag AU - Ignjatović, Dušan AU - Milošević-Mitić, Vesna AU - Maneski, Miloš PY - 2012 UR - https://raf.arh.bg.ac.rs/handle/123456789/111 AB - Belt conveyors are complex systems with drive groups as functionally very important components. Their proper and reliable operational life is directly related to durability of the load-bearing steel structures. Drive units often have problems linked to increasing of vibrations of steel structures. Drive units on 2nd BWE-BC-S system on Drmno open cast mine (Serbia) and on waste dump on Pljevlja open cast mine (Montenegro) were used as the examples of behaviour and condition diagnostics. As the most suitable diagnostic tool, numerical-experimental procedure was defined in the paper. It showed that the considered constructions failed due to incorrect operational parameters related to vibrations of structures. Appropriate strength diagnostic gave solutions for rehabilitation and reconstruction. The analysis was done using computer calculation, finite element method, with the required experimental measurements. This enabled determination of the actual behaviour of structure, reliable prediction of its response in exploitation, determination of the cause for unfavourable behaviour or failure, assessment of service life time of reliable exploitation and the level of revitalization. As exploitation problems develop mostly from improper geometry design, presented methodology is necessary in the engineering analysis. This approach is justified due to low costs with a high level of the results. T2 - Engineering failure analysis T1 - Condition and behaviour diagnostics of drive groups on belt conveyors VL - 22 SP - 28 EP - 37 DO - 10.1016/j.engfailanal.2012.01.001 ER -
@article{ author = "Maneski, Tasko and Jovančić, Predrag and Ignjatović, Dušan and Milošević-Mitić, Vesna and Maneski, Miloš", year = "2012", abstract = "Belt conveyors are complex systems with drive groups as functionally very important components. Their proper and reliable operational life is directly related to durability of the load-bearing steel structures. Drive units often have problems linked to increasing of vibrations of steel structures. Drive units on 2nd BWE-BC-S system on Drmno open cast mine (Serbia) and on waste dump on Pljevlja open cast mine (Montenegro) were used as the examples of behaviour and condition diagnostics. As the most suitable diagnostic tool, numerical-experimental procedure was defined in the paper. It showed that the considered constructions failed due to incorrect operational parameters related to vibrations of structures. Appropriate strength diagnostic gave solutions for rehabilitation and reconstruction. The analysis was done using computer calculation, finite element method, with the required experimental measurements. This enabled determination of the actual behaviour of structure, reliable prediction of its response in exploitation, determination of the cause for unfavourable behaviour or failure, assessment of service life time of reliable exploitation and the level of revitalization. As exploitation problems develop mostly from improper geometry design, presented methodology is necessary in the engineering analysis. This approach is justified due to low costs with a high level of the results.", journal = "Engineering failure analysis", title = "Condition and behaviour diagnostics of drive groups on belt conveyors", volume = "22", pages = "28-37", doi = "10.1016/j.engfailanal.2012.01.001" }
Maneski, T., Jovančić, P., Ignjatović, D., Milošević-Mitić, V.,& Maneski, M.. (2012). Condition and behaviour diagnostics of drive groups on belt conveyors. in Engineering failure analysis, 22, 28-37. https://doi.org/10.1016/j.engfailanal.2012.01.001
Maneski T, Jovančić P, Ignjatović D, Milošević-Mitić V, Maneski M. Condition and behaviour diagnostics of drive groups on belt conveyors. in Engineering failure analysis. 2012;22:28-37. doi:10.1016/j.engfailanal.2012.01.001 .
Maneski, Tasko, Jovančić, Predrag, Ignjatović, Dušan, Milošević-Mitić, Vesna, Maneski, Miloš, "Condition and behaviour diagnostics of drive groups on belt conveyors" in Engineering failure analysis, 22 (2012):28-37, https://doi.org/10.1016/j.engfailanal.2012.01.001 . .