Приказ основних података о документу

Eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima

dc.creatorTekić, Žikica
dc.creatorĐorđević, Saša M.
dc.date.accessioned2019-10-31T11:20:25Z
dc.date.available2019-10-31T11:20:25Z
dc.date.issued2014
dc.identifier.issn0040-2176
dc.identifier.urihttps://raf.arh.bg.ac.rs/handle/123456789/173
dc.description.abstractThis paper demonstrates the results of experimental determination of load bearing capacity of structural timber member connections realized by WOLF and LKVC metal connector plates. Considering the complexity of the connections realized by these modern mechanical fasteners, this paper deals only with plate anchorage capacity (stress in the metal-wood contact). The aim of the conducted experimental study was to determine the metal connector plate anchorage capacity in accordance with the provisions of Eurocode 5 and also to analyze the ratio of the load bearing capacities of these two types of connectors in terms of their geometry. Experimental testing was conducted by loading of multiple samples up to the limit plate anchorage capacity. Discussion of the test results included the analysis of the connection deformation for different levels of load, as well as the mode of reaching the limit plate anchorage capacity. Review of the determined limit plate anchorage capacities, for the determined displacements of connection, was given in the conclusion, together with the comment on test results.en
dc.description.abstractU radu je prikazano eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima tipa WOLF i LKVC. S obzirom na kompleksnost veza ostvarenih ovim savremenim mehaničkim spojnim sredstvima, predmet rada obuhvata samo nosivost bočne veze (naprezanje u spoju metal-drvo). Cilj sprovedenih eksperimentalnih ispitivanja je bio da se utvrdi nosivost bočne veze ostvarene metalnim konekterima, u skladu sa odredbama Evrokoda 5 i da se paralelno sa tim analizira odnos nosivosti ova dva tipa konektera, sa aspekta njihove geometrije. Eksperimentalno ispitivanje je sprovedeno na više uzoraka, opterećivanjem uzoraka do dostizanja granične nosivosti bočne veze. Diskusija rezultata ispitivanja je obuhvatila analizu pomerljivosti veza za različite nivoe opterećenja, kao i način dostizanja granične nosivosti bočne veze. U zaključku je dat komentar o utvrđenim graničnim nosivostima bočne veze, za određena pomeranja veze, i zauzet je stav po pitanju dobijenih rezultata.sr
dc.publisherSavez inženjera i tehničara Srbije, Beograd
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceTehnika
dc.subjectmetal connector plateen
dc.subjecttoothen
dc.subjectjointen
dc.subjectlimit bearing capacityen
dc.subjectdisplacementen
dc.subjectmetalni konektersr
dc.subjectzubacsr
dc.subjectčvorna vezasr
dc.subjectgranična nosivostsr
dc.subjectpomeranjesr
dc.titleExperimental determination of load bearing capacity of connections realized by punched metal plate fasteneren
dc.titleEksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterimasr
dc.typearticle
dc.rights.licenseBY
dcterms.abstractЂорђевић, Саша М.; Текић, Жикица; Експериментално одређивање носивости веза остварених металним конектерима; Експериментално одређивање носивости веза остварених металним конектерима;
dc.citation.volume69
dc.citation.issue5
dc.citation.spage735
dc.citation.epage741
dc.citation.other69(5): 735-741
dc.citation.rankM51
dc.identifier.doi10.5937/tehnika1405735T
dc.identifier.fulltexthttps://raf.arh.bg.ac.rs//bitstream/id/51/171.pdf
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу