Show simple item record

Metalni konekter - eksperimentalno određivanje nosivosti bočne veze

dc.creatorTekić, Žikica
dc.creatorNenadović, Aleksandra
dc.creatorĐorđević, Saša
dc.creatorTerzović, Jefto
dc.date.accessioned2020-05-28T12:58:23Z
dc.date.available2020-05-28T12:58:23Z
dc.date.issued2015
dc.identifier.issn1330-3651
dc.identifier.urihttp://raf.arh.bg.ac.rs/handle/123456789/782
dc.description.abstractThis paper demonstrates the results of experimental determination of load bearing capacity of structural timber member connections realized by WOLF and LKVC metal connector plates. Considering the complexity of the connections realized by these modern mechanical fasteners, this paper deals only with plate anchorage capacity (stress in the metal-wood contact). The aim of the conducted experimental study was to determine the metal connector plate anchorage capacity in accordance with the provisions of Eurocode 5 and also to analyse the ratio of the load bearing capacities of these two types of connectors in terms of their geometry. Experimental testing was conducted by loading of multiple samples up to the limit plate anchorage capacity. Discussion of the test results included the analysis of the connection deformation for different levels of load, as well as the mode of reaching the limit plate anchorage capacity. Review of the determined limit plate anchorage capacities, for the determined displacements of connection, was given in the conclusion, together with the comment on test results.en
dc.description.abstractU radu je prikazano eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima tipa WOLF i LKVC. S obzirom na kompleksnost veza ostvarenih ovim savremenim mehaničkim spojnim sredstvima, predmet rada obuhvata samo nosivost bočne veze (naprezanje u spoju metal-drvo). Cilj sprovedenih eksperimentalnih ispitivanja je bio da se utvrdi nosivost bočne veze ostvarene metalnim konekterima, u skladu sa odredbama Evrokoda 5 i da se paralelno sa tim analizira odnos nosivosti ova dva tipa konektera, sa aspekta njihove geometrije. Eksperimentalno ispitivanje je sprovedeno na više uzoraka, opterećivanjem uzoraka do dostizanja granične nosivosti bočne veze. Diskusija rezultata ispitivanja je obuhvatila analizu pomerljivosti veza za različite nivoe opterećenja, kao i način dostizanja granične nosivosti bočne veze. U zaključku je dat komentar o utvrđenim graničnim nosivostima bočne veze, za određena pomeranja veze, i zauzet je stav po pitanju dobijenih rezultata.sr
dc.language.isoensr
dc.publisherSlavonski Brod : Faculty of Mechanical Engineering in Slavonski Brodsr
dc.publisherOsijek : Faculty of Electrical Engineering, Computer Science and Information Technology Osijeksr
dc.publisherOsijek : Faculty of Civil Engineering in Osijeksr
dc.rightsopenAccesssr
dc.sourceTehnicki vjesnik - Technical gazettesr
dc.subjectdisplacementsr
dc.subjectjointsr
dc.subjectlimit bearing capacitysr
dc.subjectmetal connector platesr
dc.subjecttoothsr
dc.titleMetal connector plate - experimental determination of plate anchorage capacityen
dc.titleMetalni konekter - eksperimentalno određivanje nosivosti bočne vezesr
dc.typearticlesr
dc.rights.licenseBYsr
dcterms.abstractТерзовић, Јефто; Текић, Жикица; Ђорђевић, Саша; Ненадовић, Aлександра; Метални конектер - експериментално одређивање носивости бочне везе; Метални конектер - експериментално одређивање носивости бочне везе;
dc.citation.volume22
dc.citation.issue2
dc.citation.spage375
dc.citation.epage381
dc.citation.rankM23
dc.identifier.doi10.17559/TV-20140331200230
dc.identifier.scopus2-s2.0-84928395064
dc.identifier.fulltexthttp://raf.arh.bg.ac.rs/bitstream/id/2199/tv_22_2015_2_375_381.pdf
dc.type.versionpublishedVersionsr


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record