RAF - Repozitorijum Arhitektonskog fakulteta
Univerzitet u Beogradu, Arhitektonski fakultet
    • English
    • Српски
    • Српски (Serbia)
  • Srpski (latinica) 
    • Engleski
    • Srpski (ćirilica)
    • Srpski (latinica)
  • Prijava
Pregled zapisa 
  •   RAF
  • Arhitektonski fakultet
  • Publikacije istraživača / Researchers' publications
  • Pregled zapisa
  •   RAF
  • Arhitektonski fakultet
  • Publikacije istraživača / Researchers' publications
  • Pregled zapisa
JavaScript is disabled for your browser. Some features of this site may not work without it.

Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener

Eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima

Thumbnail
2014
docs1254_ZTekic.pdf (2.507Mb)
Autori
Tekić, Žikica M.
Đorđević, Saša M.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentu
Apstrakt
This paper demonstrates the results of experimental determination of load bearing capacity of structural timber member connections realized by WOLF and LKVC metal connector plates. Considering the complexity of the connections realized by these modern mechanical fasteners, this paper deals only with plate anchorage capacity (stress in the metal-wood contact). The aim of the conducted experimental study was to determine the metal connector plate anchorage capacity in accordance with the provisions of Eurocode 5 and also to analyze the ratio of the load bearing capacities of these two types of connectors in terms of their geometry. Experimental testing was conducted by loading of multiple samples up to the limit plate anchorage capacity. Discussion of the test results included the analysis of the connection deformation for different levels of load, as well as the mode of reaching the limit plate anchorage capacity. Review of the determined limit plate anchorage capacities, for ...the determined displacements of connection, was given in the conclusion, together with the comment on test results.

U radu je prikazano eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima tipa WOLF i LKVC. S obzirom na kompleksnost veza ostvarenih ovim savremenim mehaničkim spojnim sredstvima, predmet rada obuhvata samo nosivost bočne veze (naprezanje u spoju metal-drvo). Cilj sprovedenih eksperimentalnih ispitivanja je bio da se utvrdi nosivost bočne veze ostvarene metalnim konekterima, u skladu sa odredbama Evrokoda 5 i da se paralelno sa tim analizira odnos nosivosti ova dva tipa konektera, sa aspekta njihove geometrije. Eksperimentalno ispitivanje je sprovedeno na više uzoraka, opterećivanjem uzoraka do dostizanja granične nosivosti bočne veze. Diskusija rezultata ispitivanja je obuhvatila analizu pomerljivosti veza za različite nivoe opterećenja, kao i način dostizanja granične nosivosti bočne veze. U zaključku je dat komentar o utvrđenim graničnim nosivostima bočne veze, za određena pomeranja veze, i zauzet je stav po pitanju dobijenih rezultata.
Ključne reči:
metal connector plate / tooth / joint / limit bearing capacity / displacement
Izvor:
Tehnika, 2014, Special edition, 25-31
Izdavač:
  • Beograd: Savez inženjera i tehničara Srbije

ISSN: 0040-2176; 2560-3086

[ Google Scholar ]
Handle
https://hdl.handle.net/21.15107/rcub_raf_786
URI
https://raf.arh.bg.ac.rs/handle/123456789/786
Kolekcije
  • Publikacije istraživača / Researchers' publications
Institucija/grupa
Arhitektonski fakultet
TY  - JOUR
AU  - Tekić, Žikica M.
AU  - Đorđević, Saša M.
PY  - 2014
UR  - https://raf.arh.bg.ac.rs/handle/123456789/786
AB  - This paper demonstrates the results of experimental determination of load bearing capacity of
structural timber member connections realized by WOLF and LKVC metal connector plates.
Considering the complexity of the connections realized by these modern mechanical fasteners, this
paper deals only with plate anchorage capacity (stress in the metal-wood contact). The aim of the
conducted experimental study was to determine the metal connector plate anchorage capacity in
accordance with the provisions of Eurocode 5 and also to analyze the ratio of the load bearing
capacities of these two types of connectors in terms of their geometry. Experimental testing was
conducted by loading of multiple samples up to the limit plate anchorage capacity. Discussion of the
test results included the analysis of the connection deformation for different levels of load, as well as
the mode of reaching the limit plate anchorage capacity. Review of the determined limit plate
anchorage capacities, for the determined displacements of connection, was given in the conclusion,
together with the comment on test results.
AB  - U radu je prikazano eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima tipa
WOLF i LKVC. S obzirom na kompleksnost veza ostvarenih ovim savremenim mehaničkim spojnim
sredstvima, predmet rada obuhvata samo nosivost bočne veze (naprezanje u spoju metal-drvo). Cilj
sprovedenih eksperimentalnih ispitivanja je bio da se utvrdi nosivost bočne veze ostvarene metalnim
konekterima, u skladu sa odredbama Evrokoda 5 i da se paralelno sa tim analizira odnos nosivosti ova
dva tipa konektera, sa aspekta njihove geometrije. Eksperimentalno ispitivanje je sprovedeno na više
uzoraka, opterećivanjem uzoraka do dostizanja granične nosivosti bočne veze. Diskusija rezultata
ispitivanja je obuhvatila analizu pomerljivosti veza za različite nivoe opterećenja, kao i način
dostizanja granične nosivosti bočne veze. U zaključku je dat komentar o utvrđenim graničnim
nosivostima bočne veze, za određena pomeranja veze, i zauzet je stav po pitanju dobijenih rezultata.
PB  - Beograd: Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener
T1  - Eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima
VL  - Special edition
SP  - 25
EP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_raf_786
ER  - 
@article{
author = "Tekić, Žikica M. and Đorđević, Saša M.",
year = "2014",
abstract = "This paper demonstrates the results of experimental determination of load bearing capacity of
structural timber member connections realized by WOLF and LKVC metal connector plates.
Considering the complexity of the connections realized by these modern mechanical fasteners, this
paper deals only with plate anchorage capacity (stress in the metal-wood contact). The aim of the
conducted experimental study was to determine the metal connector plate anchorage capacity in
accordance with the provisions of Eurocode 5 and also to analyze the ratio of the load bearing
capacities of these two types of connectors in terms of their geometry. Experimental testing was
conducted by loading of multiple samples up to the limit plate anchorage capacity. Discussion of the
test results included the analysis of the connection deformation for different levels of load, as well as
the mode of reaching the limit plate anchorage capacity. Review of the determined limit plate
anchorage capacities, for the determined displacements of connection, was given in the conclusion,
together with the comment on test results., U radu je prikazano eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima tipa
WOLF i LKVC. S obzirom na kompleksnost veza ostvarenih ovim savremenim mehaničkim spojnim
sredstvima, predmet rada obuhvata samo nosivost bočne veze (naprezanje u spoju metal-drvo). Cilj
sprovedenih eksperimentalnih ispitivanja je bio da se utvrdi nosivost bočne veze ostvarene metalnim
konekterima, u skladu sa odredbama Evrokoda 5 i da se paralelno sa tim analizira odnos nosivosti ova
dva tipa konektera, sa aspekta njihove geometrije. Eksperimentalno ispitivanje je sprovedeno na više
uzoraka, opterećivanjem uzoraka do dostizanja granične nosivosti bočne veze. Diskusija rezultata
ispitivanja je obuhvatila analizu pomerljivosti veza za različite nivoe opterećenja, kao i način
dostizanja granične nosivosti bočne veze. U zaključku je dat komentar o utvrđenim graničnim
nosivostima bočne veze, za određena pomeranja veze, i zauzet je stav po pitanju dobijenih rezultata.",
publisher = "Beograd: Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener, Eksperimentalno određivanje nosivosti veza ostvarenih metalnim konekterima",
volume = "Special edition",
pages = "25-31",
url = "https://hdl.handle.net/21.15107/rcub_raf_786"
}
Tekić, Ž. M.,& Đorđević, S. M.. (2014). Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener. in Tehnika
Beograd: Savez inženjera i tehničara Srbije., Special edition, 25-31.
https://hdl.handle.net/21.15107/rcub_raf_786
Tekić ŽM, Đorđević SM. Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener. in Tehnika. 2014;Special edition:25-31.
https://hdl.handle.net/21.15107/rcub_raf_786 .
Tekić, Žikica M., Đorđević, Saša M., "Experimental Determination of Load Bearing Capacity of Connections Realized by Punched Metal Plate Fastener" in Tehnika, Special edition (2014):25-31,
https://hdl.handle.net/21.15107/rcub_raf_786 .

DSpace software copyright © 2002-2015  DuraSpace
O RAF-u | Pošaljite zapažanja

OpenAIRERCUB
 

 

Kompletan repozitorijumInstitucije/grupeAutoriNasloviTemeOva institucijaAutoriNasloviTeme

Statistika

Pregled statistika

DSpace software copyright © 2002-2015  DuraSpace
O RAF-u | Pošaljite zapažanja

OpenAIRERCUB